Search results

B
HOWTO: Use Linksys WRT54G as a wireless ethernet bridge

hey "user1234" can you help me fix this. first here is my setting. main router(netgear) has Default Gateway: 192.168.0.1 subnet mask: 255.255.255.0 linksys wrt54gs has default gateway: 192.168.1.1 subnet mask: 255.255.255.0 PC1 connect to wrt54gs ip is: 192.168.1.2 how do i forward...
- bgbysleepy
- Post #125
- Apr 4, 2005
- Forum: Networking
B
car speakers

i want to spend under $200 for 4 speakers. two front and two rear.
- bgbysleepy
- Post #7
- Mar 31, 2005
- Forum: OT Discussion Club
B
car speakers

I'm planning to buy speakers for my 2000 accord coupe ex, but i don't know which are good. please help me choose.
- bgbysleepy
- Thread
- Mar 31, 2005
- Replies: 10
- Forum: OT Discussion Club
B
HOWTO: Use Linksys WRT54G as a wireless ethernet bridge

my computer setting like this modem--netgear(192.168.0.1)--wifi--- linksys wrt(192.168.0.2)--pc1(192.168.1.100) laptop(192.168.0.3)--wifi--netgear router this is what i did on my netgear under static routes option Route Name toLinksys Private---unchecked Active--I checked this box...
- bgbysleepy
- Post #98
- Mar 21, 2005
- Forum: Networking
B
HOWTO: Use Linksys WRT54G as a wireless ethernet bridge

I able to connect and use the internet with my wrt54gs to netgear 54g. modem <--wired-->netgear wrt54g <--wired-->pc1 I have a laptop with 54g card, but the signal is always "LOW" from the netgear's router signal. is there a way to make the linksys wrt54g to broadcast its signal so that my...
- bgbysleepy
- Post #97
- Mar 21, 2005
- Forum: Networking
B
wrt54gs vs netgear pre-n

I recently purchased two routers, netgear pre-n and wrt54gs to do comparisions. I update wrt54gs with hyperwrt newest firmwares. wrt54gs does not have a good signal range comparing to the netgear pre-n. I always get signal "low" from linksys and signal "good" from netgear. I bought wrt54g for...
- bgbysleepy
- Thread
- Mar 20, 2005
- Replies: 1
- Forum: Networking
B
WRT54GS vs WRT54G

Hi, I kinda confuse about the firmware that can be update for the those two models. 1. which router is popular for firmware? 2. I'm currently using a belkin pre-n router which i'm very satisfied because it offers a long range signal. If i buy one of the router mention above, and flash it with...
- bgbysleepy
- Thread
- Mar 17, 2005
- Replies: 0
- Forum: Computer Building
B
antec phantom 350

I have 4 hard drives, 2 sata, 2 ata. 7 fans, 1 zalman 7700cu cooler, 6600gt pny graphic card, 1 fan controller, 1 floppy, 1 dvdrw drive and some lighting. so will this phantom 350w able to run my system?
- bgbysleepy
- Post #3
- Mar 15, 2005
- Forum: Computer Building
B
antec phantom 350

the first time i used raidmax 420w and my system said that not enough power. so i go for powmax. I'm using 580w powmax psu right now. it's work fine. If i want to change to antec phantom 350 will i have enough power to run my system?
- bgbysleepy
- Thread
- Mar 15, 2005
- Replies: 5
- Forum: Computer Building
B
range extender

Please help me to solve this problem. I want to able to extend my wireless range. so i bough this Airlink due to the facts that this thing has "Also works as a Point-to-Point bridge, Point-to-Multipoint bridge, Repeater, and Wireless Client". Repeater, which will make my signal stronger. The...
- bgbysleepy
- Thread
- Feb 26, 2005
- Replies: 1
- Forum: Networking
B
wireless range extender

Please help me to solve this problem. I want to able to extend my wireless range. so i bough this Airlink due to the facts that this thing has "Also works as a Point-to-Point bridge, Point-to-Multipoint bridge, Repeater, and Wireless Client". Repeater, which will make my signal stronger. The...
- bgbysleepy
- Thread
- Feb 26, 2005
- Replies: 0
- Forum: Computer Building
B
case fan 80mmX15mm

does anyone know any place that sell this. I have a raidmax scorpio and it has these two fans which generate a lot of noise, but i can't see any place that sell this.
- bgbysleepy
- Thread
- Feb 18, 2005
- Replies: 3
- Forum: Cases & Cooling
B
Panaflo 80mm 21db - $3.19 or 10/$26.50

I just got this fan 80mm from case-mod.com rated : 23.5db and 33CFM and it is a led fan. It is really quiet too, you have to put your ear next to the fan to hear it. I haven't try out the panaflo yet but do you have to put your ear next to it to hear the fan spin..
- bgbysleepy
- Post #85
- Feb 15, 2005
- Forum: Hot Deals and Giveaways
B
Network/Workgroup Issues

all computer have to connect in the same workgroup. right click my computer --computer name- workgroup:...... if the computers are using different workgroup, change it and restart computer. remember to right click on the folders that you want to share and right click sharing and security and...
- bgbysleepy
- Post #2
- Feb 12, 2005
- Forum: Networking
B
"Cannot renew IP address"

reboot the modem and router(turn off wait 10s then turn on) if the problem still going on. try to key in the ip manually. for example, right click properties on the connection in network section. ip---properties--manual. if she is using router, change the default connection to the default...
- bgbysleepy
- Post #6
- Feb 12, 2005
- Forum: Networking
B
networking printer

because there is no space for the printer in the living room. I can't connect it overthere.
- bgbysleepy
- Post #3
- Feb 12, 2005
- Forum: Networking
B
Home network problem

right click on my computer---properties---click on the computer name---you will see workgroup and its name. ALL of your computer have to have the same workgroup name. Remember to read on your wireless router manual for WEP security password, so that one one else beside you can see the files...
- bgbysleepy
- Post #3
- Feb 12, 2005
- Forum: Networking
B
networking printer

equipments i have: modem 1 + router 1 = living room modem 2 + router 2 = bed room ................................................... I set up wireless connection in the living room(router 1 & modem 1). Everything works, internet, sharing...however, how do i set up it to share the printer...
- bgbysleepy
- Thread
- Feb 11, 2005
- Replies: 4
- Forum: Networking
B
Going Raid 0+

I hate RAID 0. It is troublesome. I have 2 sata drives, 2 pata drives. Everytime I try to install windows into the raid 0 sata drives, it keeps on crashing and lost data. If you put lots of important stuffs on that drive, and once the drive fail. OH man you lost all of the files. That's why i'm...
- bgbysleepy
- Post #9
- Feb 11, 2005
- Forum: Computer Building
B
New build a SUCCESS!

I have the same motherboard. why do you buying this Audigy2 Value even though the motherboard already include the 5.1 sound plugin already.
- bgbysleepy
- Post #25
- Feb 11, 2005
- Forum: Computer Building
B
ram mix question

i am currently have 1 gb of kingston hyperx pc3200. can I add additional 1gb of PC4000 to my system. Is that possible or it will ruin my whole computer?
- bgbysleepy
- Thread
- Feb 11, 2005
- Replies: 3
- Forum: Computer Building
B
show me how to install 2 pins fans

so I have to buy 6 cables 2 pins to 4 pins to make it works? how did you connect multiple panaflo on your system?
- bgbysleepy
- Post #3
- Feb 8, 2005
- Forum: Computer Building
B
show me how to install 2 pins fans

my case has 6 fans with 4 pins. but they are too loud. I want to buy the panaflo 80mm with 2 pins. the 4 pins were easy to install, just connect male to female pins and to power supply. I wonder how do you connect all 6 fans together? my motherboard only has two 3 pins connector.
- bgbysleepy
- Thread
- Feb 8, 2005
- Replies: 3
- Forum: Computer Building
B
Panaflo 80mm 21db - $3.19 or 10/$26.50

so this panaflo at $3.19 has only 2 pins. and bgmicro sells PWR1204 4-Pin Panaflo Fan Tail for $1.49. If i want to buy 7 fans, i have to buy 7 fans + 7 four pin?
- bgbysleepy
- Post #28
- Feb 8, 2005
- Forum: Hot Deals and Giveaways
B
450watts psu raidmax still not enough power?

I have 450watts raidmax psu with 5 hard drives, 1 dvd, 1 floppy, 6 fans, 1 gigabyte 3d pro, and pny 6600gt video card. when i logon to the windows. pny pop up a message "video card is not getting enough power". is this message wrong or true? if it is right, which psu should i buy to power up...
- bgbysleepy
- Thread
- Feb 8, 2005
- Replies: 5
- Forum: Computer Building
B
msi neo2 plantium and SATA drive installation help

if you have installed windows on the sata drives and it is working probably, please list the steps how you have done. I followed the steps in the booklet and it doesn't work. windows keep on crashing. I have 2 sata and 2 pata. when i installed windows on sata successfully, windows keep crashed...
- bgbysleepy
- Thread
- Feb 7, 2005
- Replies: 2
- Forum: Computer Building
B
sata installed. windows boot up error

does anyone knows the answer for this. I'm getting crazy now. If you can, can you describe how were you set up your raid 0. This is how i did it. install two hitachi 250gb sata, one 250gb pata, one 160gb pata. 250gb and 160gb connect on the same cable on the motherboard. two hitachi 250gb...
- bgbysleepy
- Post #7
- Feb 2, 2005
- Forum: Computer Building
B
sata installed. windows boot up error

yep. raid 0. it shows up two drives when it first boot.
- bgbysleepy
- Post #3
- Feb 2, 2005
- Forum: Computer Building
B
sata installed. windows boot up error

I had two pata(everything is fine) before i installed two sata which i make them for windows bootable drive. i installed 2 hitachi 250gb sata raid 0, and finished install the windows xp pro sp 2. Then i install video card driver, and it ask me to restart the computer. I restarted. when my pc...
- bgbysleepy
- Thread
- Feb 2, 2005
- Replies: 6
- Forum: Computer Building
B
silenx 80mm 14dba/28CFM NOW THAT'S THE REAL FAN

So what do you guys think about this fan LINK it is so much better compare to all of the panaflo products. Any other fans do you think will beat this one?
- bgbysleepy
- Thread
- Feb 1, 2005
- Replies: 8
- Forum: Cases & Cooling
B
WD 74GB 10,000RPM $154.89AF

Newegghas this oem drive for $154.89 after $25 rebate. is it worth it to buy two of them?
- bgbysleepy
- Thread
- Jan 31, 2005
- Replies: 7
- Forum: Hot Deals and Giveaways
B
1gb (2x512mb) hyperX kingston for $160AR

hey bjammn I also have msi neo2 platinum. but i have pc3200 dual channel. is that right that our mobo support only 2gb of dual channel memory and up to 4 gb of regular(mixed). About the cooler, i want to buy a new one (gigabyte 3d pro) because I have a raidmax scorpio. it has 7 freaking fans...
- bgbysleepy
- Post #4
- Jan 28, 2005
- Forum: Hot Deals and Giveaways
B
1gb (2x512mb) hyperX kingston for $160AR

outpost has this deal. is it a good price to buy or was there even a hotter deal on this ram before LINK
- bgbysleepy
- Thread
- Jan 28, 2005
- Replies: 14
- Forum: Hot Deals and Giveaways
B
cpu temperature

What is your average cpu temp? mine is about 43. is that good or bad?
- bgbysleepy
- Thread
- Jan 27, 2005
- Replies: 5
- Forum: CPUs and Overclocking
B
Reccomended socket 939 CPU coolers?

wow where do you get that a64 for $150. I bought my a64 3000+ just last week at new egg for $156 already. :(
- bgbysleepy
- Post #5
- Jan 26, 2005
- Forum: Cases & Cooling
B
SATA hard drive hot deals CENTER = NO MORE

lol. I spell it wrong. sorry about that
- bgbysleepy
- Post #8
- Jan 25, 2005
- Forum: Hot Deals and Giveaways
B
SATA hard drive hot deals CENTER = NO MORE

nothing to say. everyone doesn't like it.
- bgbysleepy
- Thread
- Jan 24, 2005
- Replies: 10
- Forum: Hot Deals and Giveaways
B
Your Favorite NVIDIA Video Card

Poor him if he is going to get ban again. :)
- bgbysleepy
- Post #31
- Jan 24, 2005
- Forum: Graphics Cards
B
Your Favorite NVIDIA Video Card

what is the purpose of lifetime warranty if there is no problems with the card? how can the video card be broken? anyone ever use the lifetime warranty on the video card before and how did the company respond?
- bgbysleepy
- Post #23
- Jan 23, 2005
- Forum: Graphics Cards
B
laser printer suggestion

i'm kinda new about this. what section should i post this on?
- bgbysleepy
- Post #4
- Jan 23, 2005
- Forum: Hot Deals and Giveaways

RESOURCES

Top Bottom