Search results

M
Freeware programs and applications (continuation)

It took me a while to find this: AChat It's an open source Instant Message system for a LAN. It's server-less, doesn't require an Internet connection, or any network setup. When it runs, it detects other AChat users on the LAN. It has the basic messaging features (create channels, send...
- MadMax
- Post #147
- Jul 8, 2007
- Forum: Windows
M
Serious Question: Why are people upgrading to G80?

I bought an XFX 7800GTX when they first came out. It came bundled with a free game pad and an XFX logo T-shirt. The card cost $600. Was it worth it? Hell No! I could have waited 3 months and paid $500 for it. Then I had to watch the 7900GT come out, which about matched the 7800GTX in...
- MadMax
- Post #24
- Nov 9, 2006
- Forum: Graphics Cards
M
Problems with Antivir 7 and A64 X2

My setup is similar to yours and I haven't had those problems. I have an X2 4800+, 2GB Corsair TwinX DDR, and an XFX 7800GTX. But I'm running on an Epox 9NPA+Ultra. Maybe it doesn't like your high overclock? Do you like avast? I've been running AntiVir 7 for about a week, and I like it...
- MadMax
- Post #2
- Feb 4, 2006
- Forum: Windows
M
AntiVir 7 questions

Has anyone tried the Premium version? I was using AntiVir 6 for a few months and just upgraded to AntiVir 7 tonight, and I am very impressed. The AntiVir 7 Premium only costs about $24 (1yr) with current exchange rates, which seems competitive. And I *hate* both McAfee and Norton AV. The...
- MadMax
- Post #10
- Feb 1, 2006
- Forum: Windows
M
EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

I have the 7800GTX, and it DOES overhang the fist IDE connector. You can only plug into this connector by prying off the top clip of the included round IDE cables (which was fine with me). It should fit easily with a "normal" IDE cable since they are shorter (the rounded ones have a clip that...
- MadMax
- Post #296
- Sep 26, 2005
- Forum: Motherboards
M
EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

Thanks SPQQKY. I'm going to reinstall Windows and see if it solves some of my problems. I'll use the 6.53 drivers along with the 5629 bios. MadMax
- MadMax
- Post #203
- Aug 28, 2005
- Forum: Motherboards
M
EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

Possibly. Do you know if you're getting power to your USB ports? Maybe if you have a lighted USB flash drive, you can plug it in just to see if you're getting the +5volts. Double check your BIOS to make sure they are enabled (you probably have already, but you never know...) And check Device...
- MadMax
- Post #197
- Aug 23, 2005
- Forum: Motherboards
M
EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

Jawo, I haven't had any trouble with my USB ports, and I just checked my settings. My Device Manager lists these devices under USB Controllers: "Standard Enhanced PCI to USB Host Controller", driver version is 5.1.2600.0 by Microsoft "Standard OpenHCD USB Host Controller", version...
- MadMax
- Post #195
- Aug 23, 2005
- Forum: Motherboards
M
EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

Poll: Which NForce Platform drivers are you using? I paired this board with an X2 CPU and 1GB of OCZ PC3200 Gold, 2-2-2-5 and I have had lots of issues with this board. I'm currently using the 9npa5629 BIOS and the 6.37 platform drivers (came on the bundled CD). At first I tried the...
- MadMax
- Post #193
- Aug 23, 2005
- Forum: Motherboards
M
HELP: X2 3800, 4200 or 4400

I agree with the others, you should probably wait to upgrade until socket M2 comes out next year. Your CPU is pretty fast as it is. But, if you can't wait, then why spend the money on the 3800+? The 3800+ and the 3200+ will have identical single treaded performance. If you want to upgrade...
- MadMax
- Post #10
- Aug 2, 2005
- Forum: CPUs and Overclocking
M
Safe to Buy from ZipZoomFly?

I've run into this as well. Just because ZipZoomFly lists the item as "In Stock" does not mean you will receive it! I had an account with them, but had never ordered from them before, until 7/12/05. I checked ZipZoomFly on Tuesday night 7/12 and found the X2 4800+ "In Stock", so I quickly...
- MadMax
- Post #19
- Jul 28, 2005
- Forum: Computer Building
M
MOTHER OF ALL POLLS- How Much Ram to you have? How fast is your CPU? Are you a Dial Up user? NEW OS Poll Added

Most would probably be embarassed to post this, but here is my fastest computer: 600 MHz Pentium III (Slot-1) 384 MB PC100 SDRAM Cable Modem WinXP-Pro SP2 MadMax
- MadMax
- Post #164
- Jul 19, 2005
- Forum: Computer Building
M
Definatly stuck on a motherboard decision

Does it have to be SLI? If not, try the Asus A8N-E (an NF4 Ultra board). Lots of features, stable, and I've read that they fixed the overclocking issues with this board. Also, there is now a A8N-E Rev 2.0 that has a quieter chipset fan. It sound like everything you would want besides the...
- MadMax
- Post #3
- Jul 11, 2005
- Forum: Computer Building
M
Recommend me *TWO* new PSU's

Check these out: Here is a Zippy 700W P/S with 36A on the 12v rail. 24pin ATX connector and SATA connectors to boot. If you view the photo of the cables, you can count 12 wires per side on the ATX connector: Zippy 700W Here is a 600W version, same specs (+12V, 36A). This one's a...
- MadMax
- Post #8
- Jul 11, 2005
- Forum: Computer Building
M
Antec TruePower2.0-550W (TPII-550) vs. Antec TruePower2.0-550W EPS (TP2-550 EPS12V)

I like the Antec TruePower 2.0 line of power supplies. I want either of the two models above. They seem identical, except for the EPS has 2 fans, and support for the EPS spec. Question is, which one is better? I like the fact that the EPS12V supply has 2 fans. But are there any...
- MadMax
- Thread
- Jul 6, 2005
- Replies: 1
- Forum: Cases & Cooling
M
Asus a8n-e..

I found a list of recommended memories for the A8N-E, but OCZ wasn't listed at all. I don't want to take the chance, so I ordered the Epox EP-9NPA+Ultra instead. Mad Max My current Rig: Slot-1 Screamer Antec Plus1080AMG Case w/ TruePower 430W ATX PS Intel PIII-600 Slot-1, oc'd to 618...
- MadMax
- Post #14
- Jun 23, 2005
- Forum: Motherboards
M
Asus a8n-e..

I'm trying to decide between this board and the Epox EP-9NP+Ultra, but I can't find a review of the A8N-E with some good pictures. Does anyone have a link? Also, I have a pair of OCZ Gold Series EL 2-2-2-5 PC3200 that I will be using for this build. Does anyone have experience with OCZ Ram...
- MadMax
- Post #11
- Jun 23, 2005
- Forum: Motherboards
M
6600GT or 6800?

This is where it gets tricky. If you read any NVIDIA documentation or specifications, it will say it supports PureVideo. And they do! All 6800 series GPU's do support PureVideo, but not all of its features. Only the GeForce 6800 and 6800LE PCI-E parts support all PureVideo functions. As do...
- MadMax
- Post #15
- Jun 20, 2005
- Forum: Graphics Cards
M
6600GT or 6800?

Wow, there is so much misinformation in the above posts. Mostly because imipenem didn't say if he needed a PCI-E or an AGP card. First off, the 6800NU has only 12 pixel pipes and 5 vertex pipes, NOT 16/6! The 6600GT has 8 pixel pipes and 3 vertex pipes. Second, only the AGP version has...
- MadMax
- Post #12
- Jun 20, 2005
- Forum: Graphics Cards
M
Geforce 6600GT vs Geforce 6800(non-GT)

Rollo, Thanks for the link! Like joejccva, I've been looking for comparative benchmarks for these very cards. That review helped me considerably. Now, if only I knew what the 7800 had in store! The 7800 launch is really screwing up my graphics card decision. Now is not a good time to...
- MadMax
- Post #7
- Jun 19, 2005
- Forum: Graphics Cards
M
Quick question regarding the x800xl and the 6800gt

I'm in the same boat as Newfie. I just ordered a pair of OCZ 2-2-2-5 DIMMS from NewEgg, and I'm planning on ordering a NF4-Ultra MB, Venice core CPU, and video card soon. However, this seems like a bad time to be in the market for a video card. A 6600GT is tempting because of its low cost...
- MadMax
- Post #9
- Jun 18, 2005
- Forum: Graphics Cards
M
MONITOR WHISTLING

I'm using a Samsung SyncMaster 955DF. I used to have it set at 1152x864 resolution, until one day it started making a high-pitched squealing sound. Ever since then, I can't set it to that resolution or it emits the sound almost immediately, but the image is perfect. Now I just use it at...
- MadMax
- Post #14
- Feb 23, 2005
- Forum: Computer Building
M
Is the Zalman CPNS7000B-CU Cooler risky?

I'm familiar with computer hardware, and I've built a couple computers before, but always with retail CPU's. I'm looking to upgrade, and am interested in the Athlon 64, 3500+ Winchester core. I want to get an OEM CPU with the Zalman cooler for low noise and good overclocks. Sounds great...
- MadMax
- Thread
- Feb 23, 2005
- Replies: 10
- Forum: Computer Building
M
Isn't it time for a new Raptor?

Is is me, or is the 74GB Raptor getting old. I want to build a new Athlon-64 rig, but I am stuck on the HD selection. I want something noticeably faster than my WD1600JB. The DiamondMax 10 looks interesting, weighing in at 250GB with a 16MB buffer and NCQ, but it's still stuck at 7200rpm...
- MadMax
- Thread
- Feb 18, 2005
- Replies: 15
- Forum: Computer Building
M
Need help getting my new AMD 64 setup working with my Chaintech board

AncientPC, Can you give us an update? I'm thinking about building a system with the same Chaintec board. Is this board stable? I wondered about the 24pin power supply too. I have an Antec TruePower 430W PS now, and I'd rather not upgrade if I can get away with it. Also, did you have a...
- MadMax
- Post #7
- Feb 12, 2005
- Forum: Computer Building

RESOURCES

Top Bottom