Search results

D
Amazing

A 4400 X2 currently at 239 HTT with zero increase in VCore needed. Already better than an FX 60 without breaking a sweat. I'll know more when I run Prime, but I'm doing a SuperPi 32m now just for a quick check. If my memory was just a little better..... I can only do 2.5-3-3-6 here. My...
- Daddyjaxx
- Thread
- Jan 25, 2006
- Replies: 1
- Forum: CPUs and Overclocking
D
PRIME95 FAILING AFTER 2 MINUTES ?

The higher the CPU, the less chance of a good overclock since the headroom is not there since it is already clocked very high. I could get a 600 MHz o/c off of my 3200+ Winnie with 1.575 v. I can't even get 400 out of my 3800+ Venice with 1.65 v.
- Daddyjaxx
- Post #14
- Jun 4, 2005
- Forum: CPUs and Overclocking
D
I would like second opinions on water cooling setups

The Zalman woud be a nightmare when moving your system. DIY and get the parts that you want to fit inside the system. My Setup
- Daddyjaxx
- Post #10
- May 30, 2005
- Forum: Cases & Cooling
D
So, do you people actually drill into your cases

Sure do. I drill a couple of holes to mount the pump. My case holds up to a BIX3 or Thermochill 3 rad with no mods at all.
- Daddyjaxx
- Post #2
- May 23, 2005
- Forum: Cases & Cooling
D
AMD 64 TEMP

Remember that when you are in BIOS, the CPU isn't idling. It's running at 50-60%.
- Daddyjaxx
- Post #11
- May 20, 2005
- Forum: Cases & Cooling
D
Why no official reviews of Venice to San Diego?

Clock for clock, with no overclocking, the 3800+ Venice will beat the 3700+ San Diego. It would have to. I have read reviews comparing the 3800+ and the 4000+. They are the same clock speed and the only difference is the 1mb cache on the 4000+. Most applications showed both tied. There were...
- Daddyjaxx
- Post #5
- May 19, 2005
- Forum: CPUs and Overclocking
D
LCD Front panel COnsistent beep

Sounds like either a fan or temperature alarm.
- Daddyjaxx
- Post #2
- May 18, 2005
- Forum: Cases & Cooling
D
I cant find a case I like

You can get what I just did today: http://mountainmods.com/product_info.php?cPath=21_32&products_id=75 And I had one helluva time hitting that purchase button. I think I finally did with my eyes closed.
- Daddyjaxx
- Post #9
- May 18, 2005
- Forum: Cases & Cooling
D
Move Dell components into other case?

The 8400 uses a standard BTX PSU. You cannot mount a Dell motherboard into an aftermarket case without major mods. First, the motherboard is not standard ATX and uses a one hole mounting system. Secondly, the I/O shield won't line up. Lastly, Dell uses a ribbon type connector for the...
- Daddyjaxx
- Post #10
- May 18, 2005
- Forum: Cases & Cooling
D
An announcement for the SL-K8TPro-939 review by Mr. Fink

Does this board support Venice?
- Daddyjaxx
- Post #734
- May 17, 2005
- Forum: Motherboards
D
Overkill?(241mm fan/heatercore pics)

Are you related to Tim the Toolman Taylor.
- Daddyjaxx
- Post #7
- May 7, 2005
- Forum: Cases & Cooling
D
******BEST 6800 Ultra WATERBLOCK************

The Maze 4 is killer.
- Daddyjaxx
- Post #8
- May 5, 2005
- Forum: Cases & Cooling
D
Exos 2 Question.

Hate to be the bearer of bad news, but the best watercooling kit will only perform the same as a good HSF combination. For less money you could have gotten a killer DIY with quality components.
- Daddyjaxx
- Post #3
- May 5, 2005
- Forum: Cases & Cooling
D
water cooling, advice

I would ditch the res too and just use a T line. A res is just another thing to worry about leaking. I use a T line myself. Sure, it takes hours to bleed, but it is easy to fill with a DD fillport and a funnel.
- Daddyjaxx
- Post #12
- May 5, 2005
- Forum: Cases & Cooling
D
how many fans come with the CM Stacker and how many more do I need to buy

The Stacker comes with one lousy 120mm in the back and one lousy 80mm on the top. If you want more than one 120mm on the front, you have to buy more 4-3 units to hold the fans. Before I started water cooling, I had the cross flow fan, an 80 mm on the top and the side and two on the back with...
- Daddyjaxx
- Post #3
- May 5, 2005
- Forum: Cases & Cooling
D
water cooler for cpu , graphics and chipset

Everything is way overpriced at Frozen CPU. I checked everywhere for what I wanted and the cheapest was right from the source; Danger Den.
- Daddyjaxx
- Post #5
- Apr 27, 2005
- Forum: Cases & Cooling
D
Good cases for Watercooling?

After searching high and low, the cheapest place for water cooling is directly from the manufacturer: http://www.dangerden.com
- Daddyjaxx
- Post #4
- Apr 25, 2005
- Forum: Cases & Cooling
D
pc won't power up

Considering YOU possibly fried it yourself, consider it a gift.
- Daddyjaxx
- Post #42
- Apr 12, 2005
- Forum: Motherboards
D
DFI boards

What a pity. Some manufacturers are making 754 PCI Express boards but DFI can't make one lousy 939 board with AGP.
- Daddyjaxx
- Post #3
- Apr 12, 2005
- Forum: Motherboards
D
DFI boards

Didn't DFI make a 939 board that is NOT nforce 4? I'd like to get a DFI board, but I'm kind of partial to the 450.00 6800 Ultra that I have in the AGP version. All the AGP DFI boards I see are 754.
- Daddyjaxx
- Thread
- Apr 12, 2005
- Replies: 5
- Forum: Motherboards
D
What type of cloth do you use to remove artic silver?

Sandpaper.
- Daddyjaxx
- Post #11
- Apr 8, 2005
- Forum: CPUs and Overclocking
D
An announcement for the SL-K8TPro-939 review by Mr. Fink

I've only gotten to 250 and it takes 1.6v to get that. I haven't tried faster as I don't like the temps I'm seeing.
- Daddyjaxx
- Post #657
- Mar 31, 2005
- Forum: Motherboards
D
AMD64-3200 left running with CPU fan off...

You did have the heatsink still on. That would have helped dissipate the heat a little.
- Daddyjaxx
- Post #16
- Mar 30, 2005
- Forum: CPUs and Overclocking
D
An announcement for the SL-K8TPro-939 review by Mr. Fink

Lydia, 1. A total of five drives. 2. I have two Raptor SATA drives as my boot drives connected to the Via controller. I have two Sata and one PATA drives connected to the Promise controller. 3. RAID 0 for each. I received an email from tech support saying that both controllers can't...
- Daddyjaxx
- Post #644
- Mar 29, 2005
- Forum: Motherboards
D
See what song was No.1 on the day you were born

Damn you people are young. I was in high school or older on some of those songs: The Ballad of the Green Beret: Sgt. Barry Sadler (Pre Vietnam War period)
- Daddyjaxx
- Post #133
- Mar 28, 2005
- Forum: OT Discussion Club
D
An announcement for the SL-K8TPro-939 review by Mr. Fink

Lydia, I realize I can't build ONE raid using 4 drives with both controllers. I can't even run two seperate raid arrarys using the Promise and Via at the same time. If I load both controller drivers via the F6 key at setup, the system errors with a blue screen of death during the windows...
- Daddyjaxx
- Post #641
- Mar 28, 2005
- Forum: Motherboards
D
An announcement for the SL-K8TPro-939 review by Mr. Fink

Why can't I use the Promise and VIA Raid controllers at the same time? If I try to use them simultaneously, I either get BSOD loading Windows or after the first boot if I wait until Windows is installed to load the drivers. Quite often I receive an error message that the Windows\system...
- Daddyjaxx
- Post #639
- Mar 27, 2005
- Forum: Motherboards
D
AMD SLI Motherboard with DDR2?

No it doesn't. Why do you want DDR2? It's currently slower than decent DDR. The latencies it runs at is really bad.
- Daddyjaxx
- Post #2
- Mar 15, 2005
- Forum: Motherboards
D
Cool new case by Raidmax!

:thumbsdown:
- Daddyjaxx
- Post #2
- Mar 9, 2005
- Forum: Cases & Cooling
D
3D Marks 2005 - what's your score?

5134 3200+, eVGA 6800 Ultra, 1 GB Crucial Ballistix No overclock
- Daddyjaxx
- Post #22
- Mar 8, 2005
- Forum: Windows
D
cm stacker fans

Just get the crosflow fan and you don't need the front fans. I have one 120 in the front, one in the back, 2 80's in the back, one on the side, one on the top and the cross flow and they are all set as low as they can go with my Vantec Nexus. I can barely hear the system and I'm now at 23c...
- Daddyjaxx
- Post #4
- Mar 6, 2005
- Forum: Cases & Cooling
D
Antec P160 case fan

25mm? This case has two 120mm fans; one in the front and one in the back.
- Daddyjaxx
- Post #2
- Mar 6, 2005
- Forum: Cases & Cooling
D
How many IDE HDDs on a P4C800-E Deluxe?

Why IDE? Get SATA drives.
- Daddyjaxx
- Post #3
- Mar 5, 2005
- Forum: Motherboards
D
Holy CRAP!! BFG MOTHERBOARD???

My guess is they are just repackaging someone else's and selling a package.
- Daddyjaxx
- Post #5
- Mar 4, 2005
- Forum: Motherboards
D
Has Anyone Had Any Problems with the Aspire 520 Watt Power Supply?

Be prepared to get slammed. Aspire PSU's are generally considered garbage. You get what you pay for. I would never use one in my system.
- Daddyjaxx
- Post #2
- Mar 4, 2005
- Forum: Cases & Cooling
D
Is there anyone here thats using 2 Power Supplies in 1 Case?

You can use a cheap PSU to power non essential stuff like the fans, lights, floppy, etc.
- Daddyjaxx
- Post #6
- Mar 3, 2005
- Forum: Cases & Cooling
D
new motherboards/cpu's and windows

No you dont: Solution 5; Microsoft SYSPREP: I have swapped motherboards several times. The key is preparation of the old system before taking out the old motherboard. There is a SYSPREP tool on the XP CD. You may need to extract files from the Windows XP CD, files are located at...
- Daddyjaxx
- Post #3
- Mar 2, 2005
- Forum: Motherboards
D
VIA K8T800 Pro

Ive gotten my Soltek up to 250. If you're running at stock speeds, the Soltek is one of the fastest out there.
- Daddyjaxx
- Post #5
- Mar 2, 2005
- Forum: Motherboards
D
Is there anyone here thats using 2 Power Supplies in 1 Case?

The Coolermaster Stacker comes with a n adapter to connect the two PSU's. You have the main one and a slave. This adapter starts both PSU's when you turn on the computer.
- Daddyjaxx
- Post #3
- Mar 2, 2005
- Forum: Cases & Cooling
D
Is 30C inside the case too high?

It also depends what the room temperature is.
- Daddyjaxx
- Post #4
- Mar 2, 2005
- Forum: Cases & Cooling

RESOURCES

Top Bottom