It's not an IDE problem,but with Ethernet driver and NAM, I found out that some of packets arrived corrupted. So I reverse them back to 6.39 and it works fine now
i have never heard of somebody making his board trash just because of bios update. Except very strange coincidence, when your fuse blow off while you are updating bios:)
I think I have the same problem. It doesn't happen all the times, but sometimes after restart it just get stuck. I think it may be related to S!/S3 stand by modes. Can you try to switch them all off in BIOS to see if it is still happening?
I saw such behaviour with one of my old boards. Problem was that bottom of the board was touching a conductive materiql and as result some paths got shortcuted. Make sure that your board is not sitting on the case backplate. Best way is actualy to take it off the case and run it hust on a table
It depends on what you want. If you have loads of HDD and want to create home network with your rig as router/firewall etc DELUXE is answer, otherways nondeluxe is fine
1) It is quite easy, just push pin tops (from other side of MB) together and pull them off.
2) no :)
3) To be hones I didn't even try it with original one. My case (Antec 3000B) has quite godd airflow - 2x120 front and back + PSU and MB temperature sensor reads between 30-38C, but it is not...
if you look at specification of SATA - NCQ is part of SATA II, not SATA I. Hence nForce4 supporting SATA I doesn't support NCQ
http://www.serialata.org/docs/NCQ_TCQ_comparison_final.ZIP
http://www.serialata.org/docs/Native%20Command%20Queuing%20Final.pdf
In any case it is really pity that they don't include firewire port on board, I don't want to loose a PCI slot becasue of additional card. I have feeling I will have to go with SLI board.
It is obviously nonsense - 1002.3 is from January, file contains is different and see response from asus I got recently.
I don't know if you are using Matrox drives or try to overclock, but I am almost sure that the same problems Deluxe users are having, non-deluxe users will have as well. I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.