Search results

  1. 2

    Help me setup a personal server..

    See if you can find an old Promise SX4000. I'm running plain old IDE RAID0 with 256MB of on-card SDRAM and it's very fast.
  2. 2

    939 3000+ vs 939 3200+

    I have an overclocked 3000+. I would rather have the 3200+ and get more clock speed out of 4x HTT. In fact I wish I started with the 3200+.
  3. 2

    OCZ Platinum Rev. 2 Vs. Crucial Ballistix

    You can't show me many sticks of memory that will run DDR400 at 2-2-2-5 and DDR533 at 3-3-3-8. And like I said, if you have problems, how many companies will get on the phone with you about overclocking? Or RMA your memory becuase it won't run stable at 500MHz? 2 years from now, this will...
  4. 2

    Hooking two computer up for maintenance.

    Get a USB 2.0 wall-powered enclosure that accepts IDE drives. Then you take out the person's drive and just mount it and power on. Newegg has them for like $20. You can find a dozen uses for these things.
  5. 2

    3dmark

    Play FarCry for an hour at highest settings. It's brutal, if there is a weakness, FarCry will make it break.
  6. 2

    Help me setup a personal server..

    Do you really need RAID5 for a home file server? A simple RAID1 setup will do what you want unless you and 5 buddies are streaming pr0n over gigabit LAN.
  7. 2

    Barton XP-M losing clocking abilities

    Sounds like maybe a heat issue. Check your fans and temps.
  8. 2

    OCZ Platinum Rev. 2 Vs. Crucial Ballistix

    I have OCZ Plat EL REV2 1GB dual kit. At 400MHz, 2-2-2-5 it puts up 5000 something in Sandra memory. I run it daily at 500MHz 3-3-3-8 2T and 2.8V VDIMM and it puts up these numbers: sandra memory To me that's pretty good! It will run 533 at the same timings for 2.45GHz completely...
  9. 2

    a8n-sli overclock hd corruption

    you sure one of your drives isn't going bad?
  10. 2

    I need to overclock...

    We need to know your mobo maker and model.
  11. 2

    athlon xp 2500/2600 barton?

    Not all Bartons are unlocked. It depends on the build week and it's pretty much a crapshoot. ALL Barton MOBILE CPUs are unlocked, but not all motherboards will run them. ASUS A7N8X Ultra boards WILL run a Barton mobile. Mobile 2500s are good for at least 2.2GHz even undervolted. Because...
  12. 2

    Reccomend me a moniter

    There is nothing like a SONY trinitron for gaming. I'm still using a Multiscan G400 19". I have a Dell 17" flat-panel that is much better for browsing but games just look great on the SONY.
  13. 2

    Hmm, ordered a case with a 400w powersupply, but got this:

    LOL. A 400W power unit in a $22 case!!! Expect smoke soon.
  14. 2

    Refurb items from newegg?

    I've used mobos and vid cards refurb from newegg. They are still running strong in friend's budget machines. But I've always picked GOOD ones, like ASUS boards and ATI factory cards etc. The good thing is, Newegg will back it up for I think 30 days to protect you against a DOA or obvious...
  15. 2

    Getting my stuff Friday

    Like they said, your 420 will be fine for now, but a quality 480-500 would make me sleep easier on a performance machine.
  16. 2

    New Gfx card or system upgrade

    There are no current games that benefit from using PCIx vs AGP. SLI is really the only benefit, and mostly because you can buy one card and add a second later as a cheap upgrade. Goind with Athlon 64 would be a major upgrade for you though especially if you OC it, and an SLI board has the...
  17. 2

    Why is PCI Express being pushed so hard?

    When AGP came out, people said the same thing. And the early cards, like Voodoo3, were basically just PCI cards on an AGP slot. Give things a couple years and you'll see the apps catch up with the tech.
  18. 2

    Which of the Nforce2 boards OC the best?

    I would look on Newegg for a refurbished ASUS A7N8X Ultra and get a 2500+ mobile which is around $80 and will clock to at least 2.3GHz. The ASUS board will run the mobile without a problem and you can find them refurb for $40-50.
  19. 2

    Do you guys leave your comps plugged in when you disassemble them?

    No matter what I do in there I always unplug. Just use a grounding strap. It's not worth screwing something up.
  20. 2

    n00b Overclock on Barton 2600+

    Doom3 is so Vid limited that your overclock probably didn't help it a whole lot. You can see for yourself by going running the timedemo at both speeds. Doom3 benefits from Vid overclock almost exclusively and it's choking your 6600. That's a good OC though, not much further to be had from...
  21. 2

    is patriot memory good?

    I've had good results with Patriot memory in budget machines. If you are making a hardcore box though you should look at Crucial Ballistix, OCZ Rev2, or corsair XMS.
  22. 2

    AGP Difficulty

    Try running your memory at 2T instead of 1T command rate. I've seen two machines with that same message where that solved the problem. Alternatively you could try backing off of timings but with overclocked A64 systems I've found that many don't run 1T stable. 2th.
  23. 2

    I'm Sensing NForce4 Fever On These Boards...

    I'm about to build a machine with the same specs as my gaming machine only on an ASUS SLI board and with a PCIx 6800GT. I'll be able to run them against each other and let you know how they compare. Just one 6800GT for now though, no SLI :(
  24. 2

    Higher DDR or better CAS?

    Lower latency (2-2-2-5) PC3200 will outperform higher latency / higher clock memory until about DDR 440 or so depending on timings. By DDR500, forget it, the clock speed wins. I've looked at this myself with the OCZ Platinum Rev2 since you it runs DDR400 2-2-2-5 to DDR533 3-3-3-8 and others...
  25. 2

    Most reliable hard drive maker

    It will completely depend on who you talk to. In my own experience, Maxtors have a great return policy but die regularly. I have a Western Digital 7.8G that I still use after years, and all my other drives are WDs except for a couple Maxtors. I've never had a bad experience with WD but I'm...
  26. 2

    Overclocking memory question

    On bargain gaming machines I've built I've had good results with PDP Patriot memory. They have low latency PC3200 as well as higher latency PC4000. Good pricing. Look on Newegg.
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |