Hi...
Can I do a compress backup of my files directly to a tape?
example..
Backup
#tar cvzfb /dev/st0 20 /home/user1
Restore
#tar xvzfb /dev/st0 20 /home/user11
Is this possible? or just ordinary "#tar xvfb" parameters?
Thanks in advance.
Well....here is my old .profile from SCO....
While the new .bash_profile in Linux is this copying the parameters of the database program.
My problem is "linux" is not define in this two files...
Currently; I commented this out...and partialy the menu work but kinda worse graphics...
Hi guys....
I need help in migrating our program to linux environment but currently stuck about termcap.
The old rig is SCO Unix that has ansi terminal while the redhat is using linux terminal.
I have this on .profile in SCO Unix.
eval `tset -m ansi:ansi -m :\?${TERM:-ansi} -r -s -Q`...
Same here....for 3 years WPA-AES is a very good deterrent.
If you want to get his Mac Address....let him get in again to your WIFI System and get his MAC Address. Then do the following:
Just change the Wifi the network key/passphrase on your WPA-AES.
And then try to put his MAC Address...
If you want more info here is the link...
DNS Masquerade
You said the that you're getting the gateway or Routers IP Address as your DNS?
Probably because you have set your computer to Dynamic instead of the Static. DDWRT masquerade your DNS Settings since it is enabled on the router...
I have done updating the wpa patch 3 since last year but for some reason when I create a USB Device and read the "Wsetting.txt" in the "smrtntky" its just say WPA & TKIP. I didn't test it since I don't use WPA/TKIP but I do use WPA/AES or WPA2/AES. WPA2/AES hogs too much cpu power for the...
Hi guys/guru..
Is there a program like the one in Windows XP's SP2 "Wireless Network Setup" that support WPA/AES or WPA2/AES?
The "Wireless Network Setup" in Windows XP SP2 supports only WPA/TKIP.
Thank you in advance.
You can bring your router if:
1) If the Hotel is using Wired and using DHCP to gain internet access. If it is on Static then they are willing to give you the IP Configuration to your laptop and transfer it to your router later.
2) If the Hotel is using Wireless and they give you the SSID &...
Well the RV016 is connected to a Layer 3 Fiber Optic 3 Com Switch but we are only allowed to use 4 IP Address in the entire building of 5 floors. RV016 due to its nature of using Dual WAN distribute outright 2 IP Address. Besides, I need to monitor all the bandwidth or else the IP Provider will...
Hi guys;
I need help on IP Config for my 2 routers which is already within my RV016.
Any help to set up this 2 router on the existing DHCP Server is very much appreciated.
Thank you in advance.
I need some suggestions regarding the value of the Xmit Power in DDWRT. The default is 28Mw but I have put it on 50Mw to be able to connect users in the 2nd Flr. Is this good or bad for the router? WRT54GL v1.1 & WRT54G v2.2 with Linksys 7dbi High Gain Antenna.
Also, while browsing for the...
I have 2 WRT54G v2.2 and 3 WRT54GL v1.1
I would like to use DDRWT firmware but selecting which type is driving me nuts.
I able to get Stable V23 SP2 Standard but which one?
Generic or WRT54G.bin?
I was gonna flash my WRT54G v2.2 with the "dd-wrt.v23_wrt54g.bin" but hesitated due to...
Thanks for the input guys...I really appreciated it.
This student have to bring their laptops in school althought they have not simultaneously using the internet as 40 client but based on what I have observe, more or less 30 student are using the internet. I'm just thinking of a worse...
Hi guys;
Somebody told that WRT54G or GL routers has a maximum of 32 Clients. Is this true?
Also, is this both Wireless & Wired combine? or It is only in wireless and the wired are independent?
Because i'm confused since the default is 50 user and I have to put this on a classroom with...
Current setup for my Web Server is that the server has a static address:
IP 10.33.0.1
Sub 255.255.0.0
Gateway 10.33.255.254
DNS 10.0.1.1
What if I put the WEB Server behind the router? Is the following setting correct?
Single WAN Router:
Linksys Router (Static)
IP 10.33.0.1...
Hello forum.
Has anybody know a good product for a 2 IP router (Load Balancer)?
Other than building a linux box for routing 2 IP & traffic control can any1 recommend me a product can handle the same task?
Thank you in advance.
Okay....thanks a bunch for this two guys Randal & theblaznee
This setting works okay now...I didn't even do the "route add -net" thing.
[Internet/University Firewall Server IP 10.10.255.254]
|
|
[3com Stack III 12-Port Fiber Switch HUB]
|
|
[RHEL AS 4.0 Server (eth0)]
[IP 10.10.1.2...
Hmmm....since the WRT54G's using the 192.168.0.253 to route....and taking the GW out in the eth1...it would require me to route my RH's 192.168.1.0/24 to GW 192.168.0.253.
If this is true then I need to invoke command:
[root@eapi root]#route add -net 192.168.1.0/24 gw 192.168.0.253...
Here...you can download the drawings at this site
http://s35.yousendit.com/d.aspx?id=0K60ZGBD7V9EK1LGAUO9TUZALS
Also how do you post your drawing in the forum?
You mean no GW in the WRT54G?? like this?
[WRT54G 4-Port Switch]
[Network Setup - Static]
[IP 192.168.1.254/NM 255.255.255.0/GW 0.0.0.0/1st DNS 10.0.1.1]
[Router IP]
[IP 192.168.0.253/NM 255.255.255.0]
[DHCP - Disabled]
The eth1 work like a charm in the D-Link (without the...
If I revised the WRT54G [Network Setup] to this...
[WRT54G 4-Port Switch]
[Network Setup - Static]
[IP 192.168.1.254/NM 255.255.255.0/GW 192.168.0.254/1st DNS 10.0.1.1]
[Router IP]
[IP 192.168.0.253/NM 255.255.255.0]
[DHCP - Disabled]
I will have a problem!..the [GW...
I have this:
[Internet/University Firewall Server IP 10.10.255.254]
|
|
[3com Stack III 12-Port Fiber Switch HUB]
|
|
[RHEL AS 4.0 Server (eth0)]
[IP 10.10.1.2 /NM 255.255.0.0 /GW 10.10.255.254 /DNS 10.0.1.1]
[RHEL AS 4.0 Server (eth1)]
[IP 192.168.0.254 /NM 255.255.255.0 /GW...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.