Search results

  1. I

    Quietest SLI Power supply

    I have Enermax Whisper II 2.0 SLI 535W and eventhough I can't compare it to other PSUs I would recomend it. It is quiet (my case fans are way louder even at 50% speed, they suck but still. Actually, I have to get my ear close to it to her it.) and it has plenty of cables that are long enough to...
  2. I

    Zalman 7700 going to be to big

    Check out a picture of my rig. It may help. http://gallery.pimprig.com/showphoto.php?photo=5959&cat=504&page=1
  3. I

    AV and Firewall

    Kaspersky AV Zone Alarm Pro CounterSpy
  4. I

    Help set up my new Hyundai L90D+

    I don't know if you should uninstall old drivers first. For other hardware I would but in this case I didn't. As for installation, don't let windows look for drivers, I think that if you follow what I wrote you will make it, but maybe I wrote it incorectly. Anyway it can be installed that...
  5. I

    My first build and OC

    One more question. Do you think that getting all fans off mobo and connecting them to fan controler can help with oc?
  6. I

    My first build and OC

    UPDATE I somehow pushed it to 253x9.5=2403.5Mhz I tested HTT up to 330 and I didn't try more. I new that my memory could run at 235Mhz so I wanted to know if it could get to 250Mhz or close(in case that I run HTT 300) but no way, I had to clear cmos at close to 250 regardless of V and...
  7. I

    Can Anyone With a 2005 3200 Get Past 2.5?

    I think that your mobo north bridge chip is on air. Maybe that's the reason.
  8. I

    Occasional booting with 0 contrast on L90D+ LCD monitor

    I have BFG 6800gt with 71.84 driver, but I just can't think of how would video card, even a bad one, lower contrast on my monitor. If it is to send signal with 0 contrast that would be different issue but contrast is manually adjustable on monitor, so I just don't get it. I emailed Hyundai...
  9. I

    Help set up my new Hyundai L90D+

  10. I

    overclocking newbie can u assist plz?

    I think that your problem is LTD/FSB Frequency Ratio. If I got it right that should not be on auto when ocing. In my bios I adjusted HT from 5 to 4. Basically, HTxFSB should be 1000 or less. I think that LTD = HTxFSB and in that case your LTD/FSB Ratio should be the same as mine HT setting. Open...
  11. I

    My first build and OC

    I got it now. I'll plug my HD to SATA #3 and try again tonight. Also, it never crossed my mind to rise chipset voltage. And my mobo bios doesn't have LTD voltage but I hope that it will work regardless. Now that I tried ocing, I see why ocers love DFI. I am cool with my mobo but I wish...
  12. I

    Occasional booting with 0 contrast on L90D+ LCD monitor

    Please help! It happened again. Does anyone have any ideas why and how to fix it?
  13. I

    Help set up my new Hyundai L90D+

    Driver instalation: -put CD in -open control panel>display>settings>advanced>monitor>properties>driver> update driver>no, not this time>Install from a list or specific location(advanced)>don't search. I will choose the driver to install>Have Disk>Browse to L90D+ on your CD> install That...
  14. I

    My first build and OC

    Thanks man. I tried to oc without going through all isolation thing but I'll have to go and try it by the quick and dirty amd oc guide. What is LTD? and Ltd voltage? By chipset voltage you ment North Bridge?
  15. I

    overclocking newbie can u assist plz?

    I am new to the whole pc build and oc thing so I am not the one that would know that. I can't remember any post that mentioned it; eventhough, I've been reading about ocing for past 2 weeks, but then maybe I just forrgot that I did. I left mine at 16/16. Anyway, I am stuck too. You can...
  16. I

    overclocking newbie can u assist plz?

    CPU/FSB Frequency Ratio
  17. I

    overclocking newbie can u assist plz?

  18. I

    My first build and OC

    First of all, many thanks 2 all of you for your posts, which have been of the greatest help, from choosing hardware to ocing. My specs: 3200+ Winchester Zalman 7700-cu MSI Neo4 Platinum SLI 1GB Crosair Twinx1024-3200xlpro BFG 6800gt (oc 400x1100 couldn't get more but didn't try hard...
  19. I

    LCD noob

    http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=236003
  20. I

    Multiplier change on a 3500+ with a k8n NEO4

    Thanks for your intervention. I actually found it but wrote VID instead of ratio. I just forgott which one it was after I booted and there is the printing error in my mobo manual where I can't see CPU Ratio so I thought that it must have been CPU VID. Kinda retarded, but there's a bit to much...
  21. I

    TN-LCDs a Compromise?

    Before buying my LCD, I read a review that included response time testings. It seems that rated response times are measured with black and white color setting or some similar simlification. In real life 8ms LCD monitors have response time well above 20ms. Not that I can notice the diference but...
  22. I

    Occasional booting with 0 contrast on L90D+ LCD monitor

    I have Hyundai L90D+ and occasionally my comp boots with 0 contrast so I just get this dark screen and I can't see anything. The first time it happened I thought that my monitor or video card died but after switching monitors between my old and new comp I figure out what was the case and I just...
  23. I

    coolbits vs nvidia settings oc and frequencies

    I am using 71.84 drivers and there is oc tab. Thanks.
  24. I

    coolbits vs nvidia settings oc and frequencies

    I oced my bfg 6800gt to 400x1100Mhz from nvidia settings in display properties with no problems. However, coolbits are mentioned in this forum as the tool for GPU ocing. Can anyone tell me the diference between this two methods. I unsuccessfully tried a few higher speeds including the one...
  25. I

    Multiplier change on a 3500+ with a k8n NEO4

    I looked again under all cpu related manus and I finally found it. Multiplier is in Cell Menu listed as Adjust CPU VID.
  26. I

    Multiplier change on a 3500+ with a k8n NEO4

    I have the same problem with MSI neo4 platinum SLI but then again I am new to ocing so I have no idea if multiplier option should be in bios or is it changed through other settings. Anyway, I e-mailed MSI so I'll let you know what they have to say.
  27. I

    New drivers = higher heat?

    thanks
  28. I

    New drivers = higher heat?

    Do I void the warranty if I install ZALMAN VGA Cooler, Model "VF700-Cu"? Also will it fit when I add the second card for SLI?
  29. I

    New drivers = higher heat?

    71.84 added 280 points to my 3DMark05 score with 66.93, from 4742 to 5022 without any other changes, but it also added 10C to my GPU core temp from 65 to 75. Also, my Doom3 timedemo went from 51 to 52.2 on 1280x1024, high setings, and with vsync on. So, I would say thet it is faster but it is...
  30. I

    **Video Card Drivers**

    71.84 added 280 points to my 3DMark05 score with 66.93, from 4742 to 5022 without any other changes, but it also added 10C to my GPU core temp from 65 to 75. Also, my Doom3 timedemo went from 51 to 52.2 on 1280x1024, high setings, and with vsync on. So, I would say that it is faster but it is...
  31. I

    Nvidia 71.84 problem?

    71.84 added 280 points to my 3DMark05 score with 66.93, from 4742 to 5022 without any other changes, but it also added 10C to my GPU core temp from 65 to 75. Also, my Doom3 timedemo went from 51 to 52.2 on 1280x1024, high setings, and with vsync on. So, I would say thet it is faster but it is...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |