Good morning! (or afternoon or night depending on location). I recently picked up 4 dome cameras on ebay, with the card for my computer. It has a techwell chipset. It came with software that just plain isn't working for me. I need software that allows me to record, and gives me web access...
Well right after typing that I figured it out. I figure I will just post the solution to help anyone else searching.
The drive was not working because the UAC (user account control) was active. By turning this off I was able to read the hard drive. Guess windows was preventing access to...
I have a bit of a problem with my 2nd hard drive. I just installed vista ultimate and when I try to open my 2nd drive it says access denied. I have checked the permissions, and set it full access to everyone, but still nothing. It sees the files when I set the permissions to everyone (they...
Well I haven't had a problem with it recently. I played a few hours today with no problems at all. I did turn off my MSI Corecenter. But, I'm thinking I did that before. I have made no changes other than taking AA from 4x down to 2X. Let me know if anyone figures out a solution though...
Man! All the sites that I have read say that 350 is all that should be needed. But, I think your right. All of my diagnostics seem to go to power problems. Nothing else seems wrong. My settings are mostly default and nothing (besides the GPU, which comes like that) is overclocked. I guess...
I'll check the power connection, thanks for the idea.
Also, I am using an LCD. I actually have two lcd's plugged in (if it makes any difference).
Thanks,
Justin
Hi everyone!
I'm having a strange problem and hopefully someone has a good solution. I just upgraded my pc to a 7800gt and after a random amount of time when playing battlefield2, my monitor says its lost signal and then I have to reboot. During normal use I have 0 problems. My setup is as...
Well I tried out BF2 tonight and I did notice a pretty nice reduction in load time. My longest wait wasn't the loading of the game but when it said Loading complete..verifying client information. That seemed to take forever but with the 2GB's it seems to be quicker. Would 1 GB with 1T timing...
I let it auto-set and it stays at 2T. So I am stuck with the 2T setting? Does this really impact performance at all? Any experience with this motherboard/proc/ram combo and what could I set my ram to? I'm trying to squeeze as much performance out of the ram as possible (I hate waiting for...
I've tried to put all of the msi sites that I can think of on the safe list. The problem is that it won't let me attach the link that it starts with, which is C:\Program Files\MSI\Live Update 3\MSI.htm. Any idea how or where to add that? Thanks for any help.
Justin
Hello,
I have 2 gbytes of XMS C2PT corsair in my system (4X512) I have set the timings to 2.5-3-3-6 and I tried to set the command rate to 1T as Corsair said I could. When I try this the system won't boot. Am I doing something wrong or is this just not an option for my board. I am running...
Hi,
I have just installed MSI live update 3 and everytime I go to the site to check for updates I get an activeX warning saying my security does not permit pre-installed activex from being run from software. I have changed my IE security every which way but I think the real problem is that...
Its funny how almost half of the posts after page 1 have so little to do with the actual question. He wants to know how to spend 3.2k on a pc.
It sounds like you have the basics figured out.
Personally I would say go with a x2 4X00 (whatever fits the budget) I'm runing the 4400 and I...
Thanks! I'll go with an extra gig of ram. The price difference for XMS and value was very little (like 20 bucks) so I went with xms. I'll keep going with it. I don't overclock but I do set the timings to what they are designed for which does help performance, albeit very little...5% here and...
Thats exactly the game I've been playing (bf2) and my loading time is very annoying. Actually the game loading part is fast but then when it says loading complete verifying data takes FOREVER! Thanks for the advice!
Justin
Hi! I have a MSI K8N Platinum/SLI board and I was thinking of increasing my ram to either 2gb or 3gb (by this I mean adding another 1gb kit or adding a 2gb kit). Now I know that I don't need 3gb but the price is actually semi close (I save about 70 dollars buy getting the 2gb kit). My...
That honestly just blew me away LOL....I will look into that for sure but I think its a tad beyond me for the stage I'm in right now. I will look into Xen for sure though, it sounds very awesome.
J
Wow! Those are some really good ideas for things for me to try. Thanks again for the ideas and I am sure I will try most of those out! I'm sure most of this project will be install...mess around...format, install something else...etc etc...I want to get a working knowledge of how this all...
I see that there is an ftp on the scyld website, but I'm unsure which files I need to download, any have any experience with this?
thanks again,
Justin
Hi! I'm trying to fiind an .iso for scyld software. I hear its the easiest beowulf software to install and even allows for diskless beowulf installs. If anyone has a copy or a link I would be VERY greatful!
Thanks,
Justin
I appreciate your input on this! Thanks for the information. I am thinking about using either red hat or ubuntu (spelling?) on my master and using ParallelKnoppix on the slaves for a diskless setup in the beginning. Just to get used to running the system then possibly installing an OS on...
I honestly don't recall saying that I needed a cluster and I don't recall saying once that I knew what I was doing. I'm asking for input on a project I'm trying to do. I want to learn linux and I want to learn basic clustering, from there I may try for more advanced clustering.
I know...
Thanks for the links! Also thanks for the information. Now is there any setup that actually makes all the computers share work? I'm thinking about running something like Seti@home on it just to watch it work..is there a way to only run one file at a time and have all 4 machines working on the...
Now by load balancing you mean that all the nodes will get information from the master and do the work? Is this the same as making the the computer think that its all one big multiprocessing computer? Sorry if these are basic questions, I'm still at the start of all of this.
Thanks again...
I wasn't exactly sure where to put this topic so this is where I decided. I'm going to be trying to build my first linux cluster and would like to know what everyone thinks would be the best software to load on this setup. As of now I will have my master node be a 1.8 P4 with 512mb ram and 20...
I'm trying to figure out what the best RAM timing would be for my ram. I have Corsair XMS PC3200 CL2 ram. I am running an athlong X2 4400 with the MSI platinum SLI board. I'm not interested in overclocking my ram. Just looking for the best timings to run on the board.
thanks in advance...
Thanks for the replies! I do not plan to overclock...I am interested in getting the best performance that I can though, so it is an option. I am about to order the MSI nforce4 SLI platinum. I was thinking about buying the Corsair XMS twinX PT series (pc3200) would this be ok?
You guys always seem to have the most up-to-date news...so does anyone know when the crossfire boards will be for sale? I'm hoping for an MSI with 24-bit sound...but right now any would be fine.
Thanks for any info!
Justin
Awhile back I purchased a netgear MP101 (wireless audio player) for my bedroom. The problem I am having is that wired the unit works just fine but wireless it doesn't function at all. What I want to do is run another wireless access point, router, hub, switch whatever it takes, to my bedroom...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.