Search results

J
EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

It worked! I'm able to connect to the net, now. Thank you for that. Now I just need to figure out why I get the "unable to start 3d acceleration" message. I'll search the boards for a solution. Thanks, again sgtdic. Edit: Well, i figured it might have been an older bios problem, so i got...
- jazmann
- Post #1,367
- Mar 12, 2006
- Forum: Motherboards
J
EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

Thank you, I'm attempting this now. Man, I feel like such a moron. Thank you so much for your help.
- jazmann
- Post #1,366
- Mar 11, 2006
- Forum: Motherboards
J
EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

Thank you for replying so quickly. I looked through the add/remove and could not find activearmour or the firewall, i know the firewall is there as i disabled it while in a 4 hour attempt with verizon to resolve this problem. Ipconfig /release renew was tried multiple times as well with no...
- jazmann
- Post #1,364
- Mar 11, 2006
- Forum: Motherboards
J
EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

Since this apears to be the official 9npa post, i'd like to post a problem i'm having. I have had a problem getting this board to connect to the net. I no longer have the disk that came with the board. I've spent hours on the phone with my isp with no resolution. The drivers at epox site might...
- jazmann
- Post #1,362
- Mar 11, 2006
- Forum: Motherboards
J
Epox 9npa ultra will not connect

Any suggestions?
- jazmann
- Post #4
- Mar 7, 2006
- Forum: Computer Building
J
Epox 9npa ultra will not connect

Ah, theres the rub, the driver cd is nowhere to be found. I took the machine to a friends place to be built after a had some problems with the build(my first). He says he cant find the driver disk, and ive turned my place upside down looking for it as well. Device manager shows 2. 1 is 1394 net...
- jazmann
- Post #3
- Mar 6, 2006
- Forum: Computer Building
J
Epox 9npa ultra will not connect

Heloo all. I have a big problem with my semi-new build. I cannot connect with the internet. I had some problems after i reinstalled the drivers for my video card, my nic went missing. I was able to find it again through some bios adjustment, but it will not connect now. I have sent Epox numerous...
- jazmann
- Thread
- Mar 1, 2006
- Replies: 3
- Forum: Computer Building
J
Reinstalled my 6800gt drivers and NIC driver went missing

anyone have any suggestions?
- jazmann
- Post #7
- Feb 27, 2006
- Forum: Computer Building
J
Reinstalled my 6800gt drivers and NIC driver went missing

Okay, update. Found and enabled the NIC in bios. Has an addy and everything. Unfortunately i called verizon to see if they could help me connect with the new cpu as i have a router and would like to use 2 cpus. They had me ping the same addy 30+times with the same bad result every time, so they...
- jazmann
- Post #6
- Feb 24, 2006
- Forum: Computer Building
J
Reinstalled my 6800gt drivers and NIC driver went missing

Thanks, i had to burn those to disk as i cant connect to net with cpu in question. Will let you know if successful. Thanks again.
- jazmann
- Post #5
- Jan 16, 2006
- Forum: Computer Building
J
Reinstalled my 6800gt drivers and NIC driver went missing

I believe I did as this is what Evga suggested, I can't connect to the net now on that pc so am unclear as to where to go from there.
- jazmann
- Post #3
- Jan 12, 2006
- Forum: Computer Building
J
Reinstalled my 6800gt drivers and NIC driver went missing

Well, I built my new system and had mucho trouble. First I got a bad board. Epox 9npa ultra. They sent me a new one. Bought a bad 6800gt from a member here. Evga replaced it. Got it all up and running finally, but when i went to install new drivers for the card, it wiped out alot of my other...
- jazmann
- Thread
- Jan 9, 2006
- Replies: 6
- Forum: Computer Building
J
Epox 9NPA Ultra not booting.

Tried the new power supply and still not working. Also, I got this response from Epox: Dear User, Sorry for the troubles. Just to verify, If you are having trouble booting the system and getting a screen try the following multi-step procedure. Power off your system first before completing any...
- jazmann
- Post #9
- Sep 13, 2005
- Forum: Computer Building
J
Epox 9NPA Ultra not booting.

Well, I went out and bought another power supply to test my board with as I did not know what else to do. I'll post my findings if anyone is interested.
- jazmann
- Post #8
- Sep 13, 2005
- Forum: Computer Building
J
Epox 9NPA Ultra not booting.

Yes, I followed the instructions to the letter. And is it ATX or molex? The extra power connecter on the mobo is a square 4 pin, not flat like molex, right?
- jazmann
- Post #6
- Sep 13, 2005
- Forum: Computer Building
J
Epox 9NPA Ultra not booting.

Its the PSU that came with my Antec Sonata 2. Everything going in this system is brand new. The thing is, everything worked the way (I'm Assuming) it was supposed to. I got the Epox screen that showed my processor. I guess thats the boot screen. So I was jazzed. All the LEDs on the Mobo were lit...
- jazmann
- Post #4
- Sep 12, 2005
- Forum: Computer Building
J
Epox 9NPA Ultra not booting.

Anyone have any insight into this? I've tried starting from scratch, and can only get the vid card and rear case fan to work.
- jazmann
- Post #2
- Sep 12, 2005
- Forum: Computer Building
J
Epox 9NPA Ultra not booting.

Last night I finally started putting my new rig together. Epox 9NPA-U, Athlon 3000 venice inside Sonata 2. EVGA 6800gt. I got the boot screen. Everything A-ok. Went to bed as was pretty late. Next morning I plugged the power back in and tried to start up again. The only thing getting power is...
- jazmann
- Thread
- Sep 11, 2005
- Replies: 9
- Forum: Computer Building
J
Directv Retentions $15/mo off for 6 months

I'm so mad at Directv right now I can't see straight! First of all Sunday Ticket BLOWS! At least half the games I wanted to watch last year were blacked out. Oh, sure I could have watched them on local stations, If they had them then! Even now my local stations are almost unwatchable. Remeber...
- jazmann
- Post #51
- Aug 9, 2005
- Forum: Hot Deals and Giveaways
J
World of Warcraft $19.99

Got mine today and everything works! I'm not sure what I got myself into, but it looks pretty cool. Thanks, OP!
- jazmann
- Post #111
- Aug 2, 2005
- Forum: Hot Deals and Giveaways
J
The build I've almost got figured

So is the stock sonata smartpower crap or not? If I can use it, that'll save me some money and a few less right hooks from my wife.:D So 2x1GB valueram would be good or 2x512 Patriot or OCZ? Also, does rev E mean anything in relation to the processor? I saw that in a pricewatch search for...
- jazmann
- Post #7
- Aug 1, 2005
- Forum: Computer Building
J
The build I've almost got figured

Blatant bump in an attempt to get more feedback. Cheers!:beer:
- jazmann
- Post #3
- Aug 1, 2005
- Forum: Computer Building
J
The build I've almost got figured

I know it's another "here's my build, any suggestions" post. But I could use any feedback, pos or neg, that you guys might offer. Mobo EPoX EP-9NPA+Ultra Processor AMD 3000+venice - by the way, can anyone tell me wtf rev E is? I saw that searching pricewatch. Vid Card 6800GT Memory OCZ...
- jazmann
- Thread
- Aug 1, 2005
- Replies: 14
- Forum: Computer Building
J
Upgrading my GeForce3 Ti 200 video card

Just ordered a 9600xt from newegg for 85.00+2.50sh. A little more than I wanted to spend, but I think I'll be happy till my build. Thanks, guys.
- jazmann
- Post #16
- Jul 28, 2005
- Forum: Computer Building
J
Upgrading my GeForce3 Ti 200 video card

The problem with waiting till I build my system is that I probably wont be able to play the new games with my current card GeForce3 Ti 200. So am looking for a temporary, relatively inexpensive solution. It appears that I can find a 9600 pro for around 80 clams. Gigabyte- 79.99 Sapphire...
- jazmann
- Post #13
- Jul 28, 2005
- Forum: Computer Building
J
Upgrading my GeForce3 Ti 200 video card

Thanks, guys. I'm sold on the 9600 for my old system. Planning on keeping it for my wife after I build my AMD system. Now commencing a massive search for best price on 9600. Any manufacturers to stay away from?
- jazmann
- Post #10
- Jul 28, 2005
- Forum: Computer Building
J
Upgrading my GeForce3 Ti 200 video card

Any help would be appreciated. My new system won't be built for a while.(4 months) My current card is a GeForce3 Ti 200. Would like to play some newer games out there. Don't want to spend alot on a card. Will be building a new system in about 3-4 months. Can someone recommend a decent card that...
- jazmann
- Thread
- Jul 28, 2005
- Replies: 18
- Forum: Computer Building
J
Dell 19" Ultrasharp 1905FP $213 + $21 padding @ dell SB

I can't get it to work. Got the total over 500, applied coupons. It sees the coupons but does not apply coupons. Says there is a problem with them without specifics. Anyone else?
- jazmann
- Post #25
- Jul 26, 2005
- Forum: Hot Deals and Giveaways
J
**Super HOT ** Lowest Ever ** Canon EOS Digital Rebel 6.3MP Digital SLR Camera w/ Lens » only $589 + Free Ship

I agree with artist99, as well. Dell is crap. At least in my experience. On the other hand, They are great if you manage to take advantage of one of their many rock bottom deals. Just be aware, if something goes seriously wrong with your rock bottom product, your'e better off throwings rocks at...
- jazmann
- Post #22
- May 19, 2005
- Forum: Hot Deals and Giveaways
J
Old hdd formatting.

Thanks for the suggestions. I'll try maxtors site for the tool. Thanks, again.
- jazmann
- Post #4
- Apr 6, 2005
- Forum: Computer Building
J
Old hdd formatting.

I have two old 30GB internal Maxtor hdd's. One was in use on an old PII system running Win 98 and has about 8 GB of stuff I don't want/need. The other is from a "bargain" PC that never got used. I installed them in my Dell. One internal and the other in an external enclosure. Win XP recognized...
- jazmann
- Thread
- Apr 4, 2005
- Replies: 3
- Forum: Computer Building
J
problems uninstalling roxio

Hope someone can help me with this problem. I have heard how bad roxio is. And I've had some experience with quite a few coasters using it. So I uninstalled roxio and tried to install nero, as I've heard good things about nero. Problem is when I uninstalled roxio, both my DVD drive and CD/RW...
- jazmann
- Thread
- Mar 28, 2005
- Replies: 0
- Forum: Windows
J
******Hardware and System Building Guide For New Users******

Bump
- jazmann
- Post #69
- Mar 28, 2005
- Forum: Computer Building
J
What are the best places online to find components for DIY rigs?

Thank you all, this will help me immeasurably. And thank you, Kooldrew for the link to UsandThems guide. It's great.
- jazmann
- Post #9
- Mar 27, 2005
- Forum: Computer Building
J
******Hardware and System Building Guide For New Users******

I think this is a fabulous guide. Great for exactly who it was intended. People like me, who have some, very limited knowledge of the inner workings of a system. And who are really interested in building thier own rig for the first time. I've been going through threads here for about 4-5...
- jazmann
- Post #68
- Mar 27, 2005
- Forum: Computer Building
J
What are the best places online to find components for DIY rigs?

I plan on building my rig in the next month, money allowing. Yes, Ive got some of the parts that will go into my new system already. I want my system to be somewhat future upgradeable. I know there has been lots of talk about PCI-E. Is this much more expensive? Also, I think I'm leaning...
- jazmann
- Post #5
- Mar 26, 2005
- Forum: Computer Building
J
What are the best places online to find components for DIY rigs?

First off, I'm pretty new to AT, so please forgive/move if this is not in the correct forum. I have puchased two dells in the past, the latest in 02 was an 8200. Never really had any probs until recently decided that it was time to upgrade. Big problems, there. After listening to the dell...
- jazmann
- Thread
- Mar 26, 2005
- Replies: 8
- Forum: Computer Building
J
100pk Taiyo Yuden DVD-R $24

Yup, 32$ for me, too.
- jazmann
- Post #32
- Mar 24, 2005
- Forum: Hot Deals and Giveaways
J
Noob needs help converting new internal HD to external

This is the info i got from DELL(bassturds). Your 8200 does not support SATA nor usb 2.0. We would be happy to tranfer you to our sales department so that they may assist you in purchasing a new dell P.C.! I'd like to fly over to india and beat the living crap out of every single dell employee...
- jazmann
- Post #7
- Mar 24, 2005
- Forum: Computer Building
J
Noob needs help converting new internal HD to external

Just found out that the 8200 that I have contains the 850 chipset. Apparently that chipset does not support SATA or usb 2.0, so i am forced to put a new motherboard. Anyone know alot about modifying dells? What is a good, inexpensive motherboard that supports SATA and usb 2.0 that will work...
- jazmann
- Post #4
- Mar 24, 2005
- Forum: Computer Building

RESOURCES

Top Bottom