Search results

  1. C

    Bad, bad USB ports!!!

    Well...before I left for work this morning, I dropped $30 for TI 2016, but didn't get the chance to "play" with it, but before I left, I had a look at the interface and it looks nice. My older version by the way was 2012 :( I will play this weekend with it, starting with safe mode and a...
  2. C

    Bad, bad USB ports!!!

    Thank you for the advise corkyg. I have always used the copy disk function, and it's never failed me...well...not until now. At this point in time, I am going to try uninstalling the usb(s) and then rebooting. I will do this in Safe Mode, and if that fails, I will upgrade my Acronis and try...
  3. C

    Bad, bad USB ports!!!

    Will have to look when I get home, but I THINK it's 2012 or 13...not 100% certain. I am not sure what you mean by how I did the cloning, but it has a copy disk function where you chose drive you want copied and then the target drive. PC reboots and it does it's thing then shuts down...
  4. C

    Bad, bad USB ports!!!

    I am booting form the 500GB...I attach the 250GB as secondary drive after Windows 7 Ultimate loads to desktop. Mentioned my issue to a co-worker, and her told me to do the exact same thing as you except to do it in Safe-Mode. Thank you for the suggestion, I will try that, provided I can...
  5. C

    Bad, bad USB ports!!!

    Having a weird issue with my computer. After using Acronis to clone my 250GB SSD to a 500GB, NONE of my USB (2 or 3) ports work anymore (front or rear). Well...they do work for my mouse and keyboard and they DO charge and recognize both my iPhone and my Nexus 7...but when it comes to thumb...
  6. C

    Is it worth an RMA?

    Thank you both. As it is still under warranty, I am going to RMA it because all 4 sticks of memory test okay on a similiar mobo.
  7. C

    Is it worth an RMA?

    My motherboard (GIGABYTE GA-990FXA-UD3) has been booting with one long beep followed by one short one since day 1. There are no issues (to my knowledge) and it runs fine. The only issue is at start-up. Is this worth an RMA for the board? If I don't RMA it, am I doing any damage to anything? I...
  8. C

    32 inch monitor

    I am looking at getting a larger screen as well. I want to upgrade from 24" to a lot bigger, and am specifically looking at TVs with an HDMI input. Any of the 32" ones here...
  9. C

    USB 3 "issues"

    No apologies necessary :) Update: Okay...I don't know wtf I did, but I came home from work, plugged in one of the USB 3 flash drives (the bitlocker one) and it opened IMMEDIATELY!!! There was no pop-up about finding new device...it just WORKED. I am happy it works now, but a little...
  10. C

    USB 3 "issues"

    Okay...at work now, and was just now able to get online. What I did this morning. Went into DevMgr and uninstalled the USB 3. I then plugged in a flash drive and waited for the computer to tell me "Hey...I detected a new device". It did not, and I was late and didn't think of going...
  11. C

    I'm disassembling/returning in one hour, which of these two AM3+ boards should I get?

    Good luck with the USB 3.0 on the 990 board. It's been a nightmare for me. http://forums.anandtech.com/showthread.php?t=2422345&highlight=
  12. C

    USB 3 "issues"

    No, I do not use micro-B connectors...all me flash drives are regular size. I have some like this http://www.amazon.com/StarTech-com-S.../dp/B00HJZJI84 (except mine is blue) to attach an SSD to, and it does work...but (like the flash drives) not immediately. Yes, the drive's light flickers...
  13. C

    USB 3 "issues"

    Thank you for the replies... I have a Fractal case as well, as noted in my sig, but I have been using it less than a month, so worn ports are not an option for me. I shall take your advise on the Renesas chipset, IF and when it comes down to it, but I would live to get this up and...
  14. C

    USB 3 "issues"

    Yes to the non bitlocker flash drive...it takes a while (but not as long as the encrypted drives) NO to the mouse and keyboard...they both were immediately recognized and worked as soon as they were plugged into the USB 3 ports. I tried this on both front and rear Both the front ports on the...
  15. C

    USB 3 "issues"

    Motherboard is in signature. I have downloaded all drivers directly from Gigabyte's website. My issue is this, when I plug a USB 3 flash drive into any USB port, it takes at least 2 or 3 minutes for my computer to recognize it. To be honest, all my flash drives are protected by bitlocker...
  16. C

    I got a new motherboard

    Well...went into regedit, and found that the value IS set to 0 under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci I guess it's time for a re-install. I don't want to, but I guess it's warranted now due to the piss poor performance of this Samsung SSD :(
  17. C

    I got a new motherboard

    MAJOR UPDATE...SYSPREP WORKED!!! HOWEVER...after swapping motherboards, now my system takes MINUTES to get to my desktop, whereas before, on my old motherboard (still in signature) it took an estimated 20 to 30 seconds from pushing the power button to get to a workable Desktop. I do not...
  18. C

    Case reccomendation, I have a few in hand to chose from on a new build

    LOL, that would be a NO!!! :) It will be about 3 feet off the floor on my "work table" Thank you, I didn't know how tall the feet were
  19. C

    Case reccomendation, I have a few in hand to chose from on a new build

    My concern about the Fractal R4 is that I wonder if there is enough ventilation on the bottom...does it sit up high enough to either mount a bottom fan or put the power supply face down so it draws air in from the bottom of the case.
  20. C

    I got a new motherboard

    I shall use SYSPREP and give it a shot this weekend(ish). Thanks for the replies.
  21. C

    Why do I want to watercool?

    I kind of knew that 8 C was way too low, and that my temps should be WAY higher than 33 C at 100% CPU load. I will give coretemp a try, and then use the Corsair H100i anyway as it is already in my new case, installed with Noctua fans. 19 decibles at max should be totally inaudible...like a...
  22. C

    Why do I want to watercool?

    And now I can :) Thank you for the reply
  23. C

    I got a new motherboard

    + Sabertooth or CHV? I Googled Sabertooth, but all I got was links to prehistoric creatures like the one in Ice Age voiced by Dennis Leary :D Thank you for the link, looks like good reading. SIMILIAR chipset, yes and the plan is to try and see if it works or not :)
  24. C

    Why do I want to watercool?

    New case (Fractal R4), new motherboard and a Corsair H100i for my new build. However, none of that matters, other than the H100i. My current HFS is a Noctua NH-D14, and my highest temps on it runningPrime95 was 33 C (according to CPUID Hardware Monitor) https://i.imgur.com/J3VpsoP.jpg...
  25. C

    I got a new motherboard

    Yeah, yeah..."yippie for you" I can hear you saying :) My old motherboard, in my signature is 970A My new motherboard is a GIGABYTE GA-990FXA-UD3 http://www.newegg.com/Product/Produc...82E16813128514 Now...what are the chances that I can just plug in my SSD from my old computer into...
  26. C

    I want to upgrade

    well, I just read an article in Maximum PC...so the R9 280X 3GB it is!!! Thank you for all the input, and I think I was leaning toward the videocard anyway. Thanks for the push ya'll :)
  27. C

    I want to upgrade

    I posted this on reddit as well, and most of the replies are telling me to get the gforce...
  28. C

    I want to upgrade

    I'm building a new rig to sell with spare parts, and would kind of like to drop the 5850 into the new build. The videocard I have plays everything well, but I would like to be more current as that card is OLD!!! I play first person shooters, and don't do photshop or any video editing. The...
  29. C

    I want to upgrade

    Not sure if to post here or in General Hardware...mods, please feel free to move. I have (roughly) $300 to blow on something. I am trying to decide, based on my current setup below, what to upgrade. Videocard (Open for suggestions...anything better than my current 5850) :) Looking at...
  30. C

    How lound are Corsair's watercoolers?

    Ditto. Keeps my 8350 below 20C when idle, and around 33 - 35C when gaming
  31. C

    Virus? Keylogger?

    It's a work computer, so I don't have Admin rights to make any changes. For now, I just uninstalled it and will HAVE to go back to IE. Thank you for reply though, and I did find it rather suspicious...plus I'm paranoid, lol :) I was using Chrome up to about a year ago, and then one day, it...
  32. C

    Virus? Keylogger?

    Just this morning when I started using Mozilla at work, I get the following message on every webpage I go to, including my Gmail and Hotmail. "The proxy moz-proxy://Agency-Proxy:8080 is requesting a username and password. The site says: "moz-proxy://Agency-Proxy:8080" Mozilla also looks...
  33. C

    Gigabyte - 970A-UD3 MB / Do I need to install the drivers?

    Will have to look when I get home tomorrow. I THINK it's 1.1 version, but not sure. BIOS version is the one that supports the latest FX Processors, and it is a BIOS downloaded from Gigabyte's site, not from AMD
  34. C

    Gigabyte - 970A-UD3 MB / Do I need to install the drivers?

    Have had this board for about 2/3 years with NO issues, and it has seen at least 3 different CPUs, and videocards. However, last week the USB3 went out, and the thumb drive was no longer recognized. Just a heads up, and not a deal killer for me :-) Oh, yeah...and the ACHI mode NEVER worked...
  35. C

    Corsair Carbide Series 200R question

    Already got, thank you though for link. Of course though, I went through Newegg...ordered yesterday and it's already on my doorstep awaiting my arrival home from work. :)
  36. C

    Corsair Carbide Series 200R question

    Done, and even with good quality filters covering the intake fans, it is silent and cool air is actually blowing out the back. Thank you. Now...off to find a good inexpensive HSF to replace the jet engine of the stock AMD fan... :( Grrrr.... :) I still don't like the look of the top of...
  37. C

    Corsair Carbide Series 200R question

    Uck... (Yes, I know that's not a word) That would mean that the top of the case would be fan free...therefore making it even uglier :( Nothing (dust/dirt wise will fall through the top vent holes? However, I will do as you suggest and put another fan in the front of the case as intake. I...
  38. C

    Corsair Carbide Series 200R question

    Thank you for the reply, lehtv, and I will remove the top front fan and put it into the rear of the case. The components are not the ones in my signature, but since I upgraded my CPU and memory, I bought a cheap mobo and case and am doing another build with my old cpu and ram. The video is...
  39. C

    Corsair Carbide Series 200R question

    Quick and simple question :) This case ----> http://www.newegg.com/Product/Produc...82E16811139018 has two places on top for exhaust fans. If I use both of them (120mm), should I still use a rear fan for exhaust as well?
  40. C

    How Long Do You Recycle Your Cases?

    I have actually lost count of how many builds my Antec 900 has seen...somewhere around 4 or 5 at least.
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |