Search results

  1. C

    How long does it take for you to build a computer?

    Usually less than three hours, depending on how muc hsoftware I install/update.
  2. C

    What is a modular power supply?

    I have been running the Antec NeoPower 480w in my rig for over a year now, and I love it. When you look in through the side panel there are no wires restricting airflow, and it is very clean looking.
  3. C

    Buying a laptop and don't want to screw up the selection

    I need to buy a notebook before I head off to grad school. I have been looking at the Dell e1505, T2400 CPU (dual core), 2GB RAM, ATI mobility X1400 2560 hypermemory (shared at some level). The config will cost me around $1000. I might have the option to pick up a Dell M70 (mobile...
  4. C

    Chaintech VNF4 Ultra and 4200+ X2

    I bought my rig last year. After the price cuts, I am thinking of upgrading the processor, but wanted know if anyone here had experience with a dual core processor coupled with the Chaintech VNF4 Ultra mobo. any feedback would be appreciated. Thanks! ~Cap
  5. C

    UPDATED: Warm? Razer Plasma Edition Diamondback Mouse

    Just a follow-up. I received my Razer Plasma yesterday, was it worth the month+ wait...no. But I am happy I have it. Works great. ;)
  6. C

    UPDATED: Warm? Razer Plasma Edition Diamondback Mouse

    SHIPPED!!!!
  7. C

    Need help deciding on parts

    It might be cheaper to go 512MBX4. You lose a little on timing but might be able to save $30-$40.
  8. C

    Need help deciding on parts

    Just run with a Chaintech VNF4 Ultra (~$92 @ newegg) and 1 GB (512X2) value ram. There have been tons of 1GB Ram Kits for ~$65 after rebate the last few weeks.
  9. C

    Need help deciding on parts

    Buy cheaper ram (value ram), cheaper mobo (chaintech ultra vnf4) and sink the extra cash into your power supply(do a search for power supplies). Go with a 6600gt refurb video card, good value and good performance. Remember to factor the extra cash you will get from selling old parts. I find...
  10. C

    DVI Cable Suggestions?

    I bought mine from monoprice.com. $10 shipped or something like that.
  11. C

    New budget build

    I went through the same thing with my budget, just come up with the extra $100, it will be well worth it in the end. You can skimp, but then you will be pissed in a month because you basically bought a new "OLD" computer. EDIT Have you factored in the extra cash you could get for your old...
  12. C

    MSI Neo4-F Vs. Chaintech VF4

    Buy the Chaintech VNF4 Ultra. It's cheap and more than enough for the average to above average user.
  13. C

    Iwill to show off eight way, 16 core system

    That is a lot of f-ing ram. I wonder what timings it will use... "The server will support 128GB memory"
  14. C

    Chaintech Vnf4 ultra!!!

    They are just providing it as a courtesy for your CPU/HSF. It is just a *bonus* if you want to call it that.
  15. C

    UPDATED: Warm? Razer Plasma Edition Diamondback Mouse

    About time they shipped... can't wait to retire the old Boomslang.
  16. C

    Video cards with HDMI interface?

    I run a DVI-D -> HDMI converter from my HDTV Cable box to my Sony TV. You still have to run a regular RCA for audio unless you have a HDMI to HDMI link. Now that I look at this, I am not sure this post adds anything to the discussionm, but someone may find it useful.
  17. C

    UPDATED: Warm? Razer Plasma Edition Diamondback Mouse

    This mouse is good for everything. I have used my Razer Boomslang 2000 for the past 2.5 years and love it.
  18. C

    Oh oh... it's baaack...!

    OK, I have seen the same error, but have you set your boot device/order to boot from the correct drive? I thought I would throw out the easy fix because I know that sometimes the small things get overlooked. Make sure the Boot Device in your BIOS is set to you Primary HDD then disable Boot...
  19. C

    UPDATED: Warm? Razer Plasma Edition Diamondback Mouse

    fleshconsumed I forgot to mention that I ordered it from Tiger Direct through AMAZON. (Amazon's shipping is $3.49 vs $9 from the actual Tiger Direct site) The Amazon listing does not indicate preorder. I called Tiger Direct on this and they apologized and said that Amazon generates the...
  20. C

    Chaintech VNF4 Ultra chipset fan is noisy

    I figured out the problem. Chaintech adds a metal shield on top of the fan that seems to be the source of the noise, so I took it off and now it is very quiet. Thanks for your suggestions.
  21. C

    UPDATED: Warm? Razer Plasma Edition Diamondback Mouse

    I think it is $60 from the Razer site vs $49 from Tiger Direct. Guess the old Boomslang is gonna have to hold me over...
  22. C

    UPDATED: Warm? Razer Plasma Edition Diamondback Mouse

    I ordered this on Monday, 5/9/05, and called yesterday, 5/12/05, to see if it had shipped. Tiger Direct said it was packaged and shipping that day. Fast forward to today, let's say around 11:00am pst, I get an email from Tiger Direct: "Dear Valued Customer, We do apologize for the...
  23. C

    Upgrading To Windows XP 64 (Issues?)

    Major Payne- Any problem with the chaintech mobo and its included drivers?
  24. C

    Chaintech VNF4 Ultra chipset fan is noisy

    What fan can I replace it with? I looked on newegg but did not see anything.
  25. C

    Chaintech VNF4 Ultra chipset fan is noisy

    The motherboard is less than a week old, is it normal for the chipset fan to be annoyingly loud? How can I fix it? When I put my finger on the fan and press down gently it gets a bit quiter. Will taking the metal cover work?
  26. C

    What resolution for 2001FP?

    I was running my dell 2001fpw @ 1024X768 for 7 months while I was saving for a new computer. I just upgraded and am finally running DVI @ 1600X1200 and I don't care how small the fonts are, they are crisp and readable. Moral: Run it at 1600X1200
  27. C

    Venice, what is the verdict?

    Doesn't the Venice core allow you to run with all 4 memory banks full @ DDR400, whereas Winchester runs all 4 memory banks full at DDR333?
  28. C

    System is finally built (3200+ Winnie, Chaintech Ultra, etc.)

    Therein lies the problem, I just don't understand how to get it there... Are there specific settings to run that would get me to ~2.4 or ?
  29. C

    System is finally built (3200+ Winnie, Chaintech Ultra, etc.)

    Agreed, I wouldn't want to fry anything. However I would like to overclock this, as it is one of the reasons for the complete overhaul of my old system. It should be able to overclock to ~2.4 safely, right?
  30. C

    System is finally built (3200+ Winnie, Chaintech Ultra, etc.)

    So here are the final specs: AMD 3200+ Winnie (Stock Cooling) Chaintech Ultra 939 mobo 4 X 512 dane-elec DDR400 (please don't ask why) Rosewill X800XL 256MB Vid Card 2 X 250GB Hitachi SATA HDD 160GB WD PATA HDD NEC 3500 DVDRW Aopen 1648/p DVD Antec NeoPower 480W Antec Super Lanboy...
  31. C

    What is Spread Spectrum Clocking for SATA II HDD

    I will leave it off, thanks!
  32. C

    Need Build Advice

    Chaintech Ultra I think you can get mild/medium oc with no problem. Just using the included nTune software and allowing automated overclcking I am running at 2.2GHz on a 3200+ Winnie(Nothing major but I am still learning how to oc). Someone has a thread on here about ocing the Chaintech
  33. C

    Need Build Advice

    I just built a new system with the Chaintech VNF4/Ultra this last weekend and it works great, no problems whatsoever.
  34. C

    What is Spread Spectrum Clocking for SATA II HDD

    I have 2 X 250GB Hitachi SATA II drives hooked up to my Chaintech Ultra nForce4. Both the motherboard and the drives support Spread Spectrum Clocking and I am wondering if I should use this feature. Does anyone know what this is?
  35. C

    What power supply for my setup?

    I just decided to go to Fry's last night and buy the Antec NeoPower 480W. I think I might just keep it for the 30 day return period while I look for something a little less expensive (The Antec was $120). Specs look really good.
  36. C

    What power supply for my setup?

    I would like to know how $53 can buy a quality PS. Also, is 15A enough for 2 HDD, 4X512 RAM, DVDRW, DVD-ROM? An why 17A for the PCI-X? It seems like alot.
  37. C

    What power supply for my setup?

    xClio SPEC Type ATX Maximum Power 450W Fans 1 PFC Active Dual +12V Yes Hold-up Time >20ms at full load, nominal line Efficiency > 70% Over Voltage Protection +3.3V, +5V and +12V Overload Protection 110-160% Input Voltage 230Vac Input Frequency Range 50~60Hz Input Current...
  38. C

    What power supply for my setup?

    All my parts are coming in on Monday 5/9. I am planning on using my Powmax 480W power supply temporarily, just until Fry's has another Antec 500W True Power for $50AR. But now I am reading a bit more and am wondering if my current power supply will even provide enough juice. (I will not be...
  39. C

    About to upgrade, but need some input

    So one thing I am seeing concerns me with the chaintech mobo. It supports 266/333/400 ram. I am skeptical about the boards that offer all theses options. I am thinking a board that just offers DDR 400 dual channel... Edit: Nevermind, I somehow linked to the old version of the board.
  40. C

    About to upgrade, but need some input

    Revised Lineup: So here would be the new line-up A64 3200+ Winnie - $190 ATI X800XL - $269 Chaintech VNF4/Ultra - $84 Total - $543 Looks better, I am trying to see the difference between the the Chaintech and the Asus, all I can see at first glance is the lack of firewire...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |