My very subjective test convinced me that I like the Dell better then BenQ. I have Dell 2407 at work. I ordered a BenQ FP241W for home.
I put both monitors on the same video card-6800 Ultra. Both were being driven by DVI. I used the Nvidia calibration wizard thing to calibrate both and...
I wonder if the E4300 coming out is causing a price shift.
As mentioned above, I dont think an FX-60 has ever been this low. FX-60 For 299.00
Shipping was 25.00 to Fla.
Just two days ago, the lowest price I could find for an OEM FX-60 was around 350.00 and that was an open box at the...
I have the 4200 and the An832. I bought an ARTIC cooler 64.
http://www.newegg.com/Product/Product.asp?Item=N82E16835185125
It brought my temps down a few degrees.
Easy to install.
The only thing I can find is the jumper on the motherboard. That must be it. Remove the battery, place jumper on 2 and 3 for 10 seconds. Replace jumper back. Install battery. You will have to set stuff up in BIOS again.
Well I went back to see what I did and looks like things have changed. I recently flashed my Bios to 1103 and now the settings I used to OC before don't work. It did work on 1009 and I ran it a few days without problem. The only thing I changed then was FSB, mulitplier, and Voltage. I did not...
I have had some problems with RAID. A few BSOD and blah blah blah. I put in the new BIOS 1103 i think and have been running RAID 0 on two raptors now without issue. I tried OC stuff before and as this was my first OC board I probably screwed some stuff up. Everything seem ok now, but early...
I'm running it. Just did a rebuild.
Two 37 GB Raptors in Raid 0
250 GB
6800 GS
4200
Plextor DVD
Sony DVD
No problems. Two Days. I have been playing DOD. I had some memory crashes before. I havn't had any since rebuild. But I havn't put my Audigy 2ZS back in yet which I suspect...
I got the 4200 and it did not come with the Heat Sink that has the pipes, but a standard looking block with a fan.
My 4200 seemed to be running hotter than others, so I looked around in some forums and ended up buying the Freezer 64 Pro. But it didn't really help much .. maybe a few...
Hello,
I just put together a new PC with a 4200, stock fan and A8N 32 SLI. The no load temp is about 45C, the load (Prime 95 i) is about 50C. I applied a new dab of Artic Silver with no change. My case has 2 input fans one fan on the top and one fan on the back. Even with the case...
Hello,
I'm buying a new PC for work. Unfortunately I can't build my own, and probably for the most part I'm stuck buying Dell (Precision Work Station).
I use Matlab quite a bit and a program that does some Kalman Filtering with lots of number crunching.
I'm familiar with HT, dual...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.