Search results

  1. I

    Can't access BIOS from ATI video card

    I didn't even consider flashing it until I read the thread linked above. I haven't had a chance to try yet; I'll post an update when I test it out. I appreciate all the help!
  2. I

    Can't access BIOS from ATI video card

    @Steltek: I can set "init display first" to Auto, IGFX, PEG, and PCI. I've tried each setting, confirmed that the change stuck, to no avail. I've also tried the PEG setting while desabling the onboard video, and that also failed. I had to reset the CMOS afterwards to edit the BIOS again...
  3. I

    Can't access BIOS from ATI video card

    I have it plugged into the PCIe closest to the CPU. I also have the U1b(UEFI BIOS), which is the only UEFI BIOS listed.
  4. I

    Can't access BIOS from ATI video card

    I have an Sapphire Radeon HD6770 connected to a GIGABYTE GA-Z68A-D3H-B3. I have the UEFI BIOS installed and for some reason I can't access it when I've got the DVI cable attached to the 6770. If I try I just get a blinking cursor screen. The same goes if I try and hit F12 to boot from other...
  5. I

    Where is my CPU power setting in Vista?

    Sorry, I guess I wasn't specific enough. I meant that under the advanced options the Processor Power Management doesn't appear. It should be between "PCI Express" and "Search and Indexing" from what I've seen of screenshots, but mine isn't there or in the list at all.
  6. I

    Where is my CPU power setting in Vista?

    Under Vista's Power Options there is a setting called Processor Power Management. I don't seem to have this option available to me. I have an AMD 64 X2 CPU and AMD Cool n' Quiet is set to "Auto" in the BIOS (Auto or Disable are my choices). From what I understand Vista only shows relevent...
  7. I

    Why can't I create a bootable USB stick?

    Thanks for all of the replies! I'll give these suggestions a shot today. Very much appreciated.
  8. I

    Why can't I create a bootable USB stick?

    Each time I formatted it was to FAT. In the two Phoenix BIOSes the drive shows up as a USB HDD, so I came to the conclusion it would only boot on those if I partitioned it as a HDD and made a bootable sector somewhere. But the AMI BIOS board can boot it as HDD or Floppy, and floppy never works...
  9. I

    Why can't I create a bootable USB stick?

    All I wanted to make was my OCZ USB stick boot into DOS. Nothing more. I'll cut the rant and just say that I've tried just about everything over the past couple of days. I've got three PCs to try with; two have Phoenix BIOSes and the other has an AMI BIOS with USB emulation options (such as...
  10. I

    Software to block given URLs...

    I think you can also use the firewall rules of various routers to restrict various domains and websites.
  11. I

    Purevideo and Vista

    So after migrating over to Vista and finally starting to set my HTPC up, I'm a bit confused about something. I've read that latest Nvidia drivers for Vista have the Purevideo software for using the hardware acceleration built in, along with the Purevideo HD stuff. Now, I only have a 6600GT so...
  12. I

    Accessing Vista shares with Ubuntu

    I think I read of a new version of Samba coming out soon. That might fix the linux->Vista networking issue.
  13. I

    Accessing Vista shares with Ubuntu

    I'm fairly new to Ubuntu here. I've basically just set up a second desktop in my place and have put Ubuntu on it. I want to be able to view my shared folders of my Vista PC via this Ubuntu computer. I've installed Samba and have toiled through some aggravating problems and now I can actually...
  14. I

    Can't Access Drive in Vista

    I'm not quite sure what the problem is here. I'm using Vista x64 and I can't access a SATA drive of mine. I've got four drives currently hooked up and I have no issues accessing the other ones. The thing is, if I log in as Admin or, in my local acct, if I run a cmd prompt as Admin I can...
  15. I

    Moving User data off Vista Partition

    So I've recently installed Vista and I wanted to move most of my data (Users and Program Files) to a separate partition. Users was easy enough; I just changed the folders pointed to in the registry. Program Files is proving to be quite another monster. So far I've gotten close. I've copied...
  16. I

    Post system clone kernel panic

    I used DD to clone a master drive onto the drive of another computer. The two pcs are exactly the same, and the DD went off without a hitch. The system is dual boot Fedora 4/WinXP. The XP partition boots fine, but I get the following error when booting linux: Uncompressing Linux... Ok...
  17. I

    Revolving Passwords for WinXP?

    Thank you very much. I'll try those methods out.
  18. I

    Revolving Passwords for WinXP?

    I'm wondering if there is a way to set up a server than can revolve Windows passwords, particularly over a domain. Currently, at work we are running into the inconveniences of having to go around to each Windows machine and manually change the Admin passwords every so often. I'm sure there are...
  19. I

    360 GPU

    I wonder if 1080i will be generated from the unscaled native 1080p render or if it will still be upscaled from a 720p render? I wouldn't mind having a choice given potential framerate concerns.
  20. I

    A Question on (de)Interlacing

    So I read an article recently and the guy had this to say, which I can't help but feel is misinformed: "Now, on a 1080p HDTV, the frames of an interlaced signal, such as 1080i30, will be displayed simultaneously at the display rate of the HDTV. As a result, you can?t say that 720p is...
  21. I

    The Vista Hive

    So, is there any way for me to gain true admin privileges in Vista? I mean, this is utter garbage if the only way is for me to jump through hoops to unlock the true Admin account and have to log in as it to do something simple like save a downloaded file to a partition other than C...
  22. I

    Can't Share Media with Xbox 360

    Yeah, it sees the 360 and I've set it to allow media sharing. The 360 also sees my PC when it searches for something to connect to, then it fails when actually trying to connect. The error message isn't helpful since it just says that "a firewall may be preventing connectivity" or something...
  23. I

    The Vista Hive

    Yeah, it was the 96.33 graphics drivers. The default drivers worked fine for me, but Windows decided not to include a "clone display" feature still, so I had to try out Nvidia. Of course, the drivers, while they crash during install, install the Nvidia control panel and allow me to clone, the...
  24. I

    Can't Share Media with Xbox 360

    I'm trying to share my library with my 360 via WMP 11 beta 2. Once I try and stream music with the 360 it'll see my computer and try and connect afterwards, but it always fails, and it fails the PC media test if I run it afterwards. I'm fairly certain some people have gotten WMP to share with...
  25. I

    No 5.1 Audio from Onboard Realtek

    I'm getting sound through the onboard Realtek ALC850 on my Chaintech VNF4 board. It's supposed to support 7.1 audio, but when I connect it to my receiver via the optical connection I only get normal stereo. I'm currently using the latest AC'97 drivers. I've tried the Nvidia drivers but they...
  26. I

    The Vista Hive

    Has anyone else had issues with the Nvidia 96.33 drivers crashing during install? Towards the end the screen goes black and then the PC restarts. Though it does seem like they are loaded since I get the Control Panel and device manager says it's 96.33. I have been experiencing some problems...
  27. I

    Westy LVM-37W1 and Ubuntu

    Thanks, guys. I'll check it out tonight and see which of your suggestions solves the problem.
  28. I

    Westy LVM-37W1 and Ubuntu

    Hi, I'm pretty new to linux and I'm trying to get my main display, a Westinghouse LVM-37W1 to work properly. I've just installed Ubuntu and during the startup the display works fine, but once the OS fully loads the display just shows a garbled mess of lines, almost as if it were receiving a...
  29. I

    Problems with PC video on Westy LVM-37W1

    After reinstalling windows I'm faced with the same problem again. Could it be the video card having a problem? I wouldn't think so since only the first video has the problem, not all, but I don't know. I'll give my system specs in case it gives anyone a clue: AMD Athlon 64 3000+ (OC'ed to...
  30. I

    Problems with PC video on Westy LVM-37W1

    Now it would appear that only the first video I open up is susceptible to this noise. If I open up a second video while the first is still open, the second will be crystal clear. Any clues what it could be now?
  31. I

    Problems with PC video on Westy LVM-37W1

    There was no filtering going on, but I have narrowed down the problem. I changed the resolution my PC was outputting and was able to eliminate the 'noise' and get very crisp video at 1280x720 and 1280x1024. I then changed the res to 1600x900 and video was unviewable there was so much of this...
  32. I

    Problems with PC video on Westy LVM-37W1

    I just got the set recently and am happy with it as my PC monitor. Only issue I have left to figure out is the following: Whenever I play a video of any kind in WMP or VLC the edges of things like text, people, ocean waves, mountains, etc. are very noisy. Almost like it was an analog signal...
  33. I

    Help with WG111 v2 USB and Fedora 4 64-bit

    Is it possible for me to get the Netgear WG111 v2 to be recognized in Fedora Core 4 64-bit? Since it's 64-bit I can't use NDISWrapper. Are there any other options open to me?
  34. I

    Building a projector

    I want to go the computerless route, to faciliate ease of use. Yeah, with a computer makes things quite a bit easier. I did, however, find this device linked from that DIY forum: http://www.viewsonic.com/products/tvent...inment/tvvideoprocessors/nextvisionn6/ Looks like a nice external...
  35. I

    Building a projector

    http://www.diyprojectorcompany.com/ That's a good site with free plans and instructions for the beginner. They even sell the parts as a whole or subkits if one is inclined. I figure if I'm getting an SXGA screen that doesn't allow image centering or aspect ratio scaling, that the picture...
  36. I

    Building a projector

    Thanks for the replies. The Tom's Guide doesn't really address the issue of scaling and image quality. I'm also going to build the unit from scratch using a metal halide bulb instead of an overhead projector with a halogen lamp. I'd rather a bulb last 6K - 10K hours than 50 - 70. The...
  37. I

    Building a projector

    I'm looking to build a projector so that I can play games, watch movies with it, etc. I'm wondering if I use a 1280x1024 display as the basis, how much of a hit to image quality due to scaling am I looking at for 720p content? 1080i? I have a monitor but no way to currently test for myself...
  38. I

    No Image Scaling with 1905FP?

    Forgive my ignorance, but when can the display adapter control control the scaling? I was under the impression that while in an OS like Windows any fullscreening, etc., was application controlled. I also seem to remember there being a menu in the Nvidia driver menu concerning how to set the...
  39. I

    No Image Scaling with 1905FP?

    If I were to, say, hook up a video game console to the RGB port of my 1905FP, would there be a way to have the image not be scaled to 1280x1024? I'd want to use unscaled 720p, naturally, but it doesn't seem that the 1905FP has a setting for scaling functionality in the OSD.
  40. I

    Question on NAT Traversal

    I have a question I couldn't find a straight answer to. I read that NAT Traversal would allow programs that require forwarded ports to run simultaneously on multiple pcs in a network. Does that mean it allows programs to run on multiple pcs by forwarding some of the port range to one pc and...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |