Thanks for the link biodoc. I haven't read it yet but I will. I updated my bios and used the auto config on my Asus crosshair IV board and am now running at 3.49Ghz. I was going to take the quick and easy route and just bump up the multiplier. I still plan on doing that as soon as I can find it...
Note to self. If the CPU box is purple doesn't mean that it isn't a black edition processor. o_O
It appears that sales rep didn't lie to me after all. Well that makes it a bit easier. I am going to get moving on this in the morning. And it only took me a week to figure out. :rolleyes:
Ok I am bummin. I am watching as some pass and close in like my computers are turned off. I bought the 1075T since Frys was sold out of the 1090T. I didn't really have any intention overclocking since the multiplier was locked. My sense of competition makes me do some investigating. I see people...
Petrustrober and VirturalLarry I passed you guys a month or 2 ago and I am watching you guys gear up to pass my a$$ in the next week or so. Only good thing about it is you both are on my team
Just upgraded my box. Amd 6 core from a quad core. Quad core went into the kids machine which was running Amd Opteron. Win 7 64 bit on both. Just took boards out of both and put in new one. Couple of reboots and all is back up and running in short order.
I was not able to do this in the past...
I fold under my email address. It is jtmilleratwoh.rr.com replace the "at" with "@".
I was at frys earlier I wanted the 1090T 6 core black edition. Of course they were out of them. They had a 1075 and I couldn't remember what that one was since I was looking for the 1090. So I asked if the 1075...
I checked a week or so ago for this and nothing. I just come back and there is 4 pages. Nice response. Count me in this year. I have put on just shy of 1.5 million points over this past year.
I plan to do an upgrade over the next couple of weeks so I may be down a day. Jumping to 6 core AMD...
2.87Ghz Phenom Quad core. ATI Raedon HD 4670 is my video card. The gpu client would crash daily from what I read may have been caused by all 4 cores crunching the smp client. I have several machines running putting up points. When I had the gpu client running I was averaging 32000-34000 points a...
I have a WHS with an Athlon dual core processor. I run 2 instances of folding one for each core. I was going to put the windows multi core client on it until I read that you must log in an a user with administrator privileges. Since I don't log in to the server very often I figured I would be...
Man am I excited. I "jtmiller" will be going over a million points tomorrow. Back in December I was about 440,000 when I started the folding race. I can't believe I have doubled in 5 months what it took me 6 years to do before. Gotta like the smp clients.
Anyhow look out osage you will be...
Well I am just finishing up the week with the gpu shut down. Definitely a good move, I have 7000 more points this week so far and folding monitor shows I will be sending about 2700 more points up before midnight.
Thanks for the info. Can't believe it made that much a difference.
If you are going to use the current version of whs OS save your money on the RAID card. I haven't heard of anyone successfully setting up RAID on WHS as it wants control of all of your drives. I am not sure if they are going to change that in the next version or not. You can hook up as many...
I had all 4 cores assigned to the smp so the video card had to interfere with smp processing.
My gpu just shut down which it has been doing on a regular basis over the past couple of weeks. So I will just leave it off for now.
I have an ATI HD4670 video card that I am currently running the GPU client. This same box is running smp client on a quad core amd. If I am reading this right, the gpu is slowing down the smp client and I would be better off turning off the gpu client to maximize my smp bonus points. Is this...
I had similar problem the past couple of days on my smp clients. Thursday morning I checked my main rig and it had attempted 12 times to get more work. I shut it down and restarted it took 4 more tries before it got work. Same thing same morning on my second smp client. My last smp client had...
Boy I hope those bonus points are pretty good. I am losing ground to MAGratton. I now forget what I was getting with the linux smp client but it was an easy thousand points more than the wu's I am putting up with the windows smp client currently. I will be sending up my third wu on my quad...
Oh I see, Assimilator1.
I assume you meant me deleting my work. The WU had expired and the client just kept telling me that without trying to download new work. Got tired of spinning my wheels.
Well apparently the ole Opteron doesn't have enough power for the smp. Just a few hours short of a...
xbassman I didn't notice that benchmark on there I will have to do some checking with that. I just fired up the smp client on my old opteron dual core again and it doesn't look good. I thought I saw someone else using the smp client on dual core. I am going to give it a day before I pull the...
I just got to my computer this morning. Looks like I got an update from microshaft and my computer rebooted so of course nothing was running. I just fired the client back up and am at 15% which took me 2 days to get to with the a1 core so I would say that it doing much better. Obviously I...
I went through that guide before I installed the client. I did forget to put the -verbosity 9 in the shortcut so I did that.
The wu is now over due and the message, Timered checkpoint triggered, now appears after each percent that finishes. I was hoping it would flush the wu and get a new one...
Thanks xbassman I will go through the guide here in a bit I have a meeting coming up in a few. I have all 4 cores cranking at 100% now I figured that one out a few days ago. I didn't have -smp in the correct place in the shortcut properties.
Yea I looked at it when you posted it. In the setup there was a question in the advanced setup asking if I want to enable the advmethod flag. Is that what you are talking about? Or do I need to put that flag in the properties of the exe. file. I used the former in the advanced setup. Which one...
P3065 (R3, C460, G19)
The monitor now says it will finish in 20 hours and is due in 21. So that is better.
Edit/ now it is 3 days ETA on finishing. I don't know if I read it wrong or if it is jumping around like that. I will see I guess.
Ok I uninstalled the folding and downloaded again the smp client. This time I put it in the root directory instead of the program files directory. Reran the install.bat and configured the new client with big working units and advmethods flag. Started the client it downloaded an a1 core and is...
Ok it looks like I really screwed this thing up.
I didn't have smp enabled in the correct place therefor it wasn't enabled at all. I just went through the -config again and enabled the smp in the correct place this time. When I click the client the window pops up says read the license...
I am running core 78. I don't have large working units, just the normal. I don't remember on the advanced methods I believe it is on. I think you actually have to turn that one off, which I didn't do.
Also when I first installed it tried 7 times to download core 78 which I already had on...
Thanks Gleem, I do have a passkey so that is taken care of. I got busy last evening and forgot to check how many points I got but from my total I figure somewhere between 4000 and 4500. Not bad for the cores not running near 100%.
I just saw that my processor wasn't working as hard as when...
Just curious. I installed the other day and just turned in my first unit an hour or so ago. I don't know how many points it was worth yet. Thing that I find weird is when I was running the Linux client through vm all 4 cores would peg into the high 90's as far as percent usage. Since I switched...
How ironic. I posted the last reply then checked my FAH monitor. Guess what it sent up the last project and apparently locked up. I had a hard time shutting it down. Thought that a restart would be sufficient but no go. I had to download and setup the windows version before heading to work. The...
First of all I am excited I am about to enter the top 100 on team 198. I have one about to ship up some units here in the next couple of minutes. First page on extreme overclockers stats.
Anyhow my problem is this:
CoreStatus = FFFFFFF6 (-10)
Client-core communications error: ERROR...
I signed up for folding about 6 years ago. Probably checked my stats a couple of dozen times over the years. For me it isn't about the stats, just doing my part to help. While my computer runs 24/7 might as well do something good. I remember getting my first dual core processor and running 2...
Looks like dual core isn't enough power. I loaded this up last night on my 165 Opty running at 2.3Ghz. The first download was small and done in 2 hours. The one crunching now has a return in 2 days and fah mon says it will be done in 12 days.
I guess it is back to 2 seperate consoles for...
I have been watching for duplicates all week and haven't found any. Looks like all is well.
I have been downloading projects worth small points value. I was kind of bummed last week when all my work was 336 points on all my normal clients. The past couple of days I have been downloading 50...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.