Search results

T
E6750 Finally Arrived!

Just a quick update - I got my e6750 ORTHOS stable for 24 hours at 3.6GHz (8x450) 1.5v ram@900MHz 4-4-4-12 2.175v, FSB 1.4, HT 1.4v, MCP 1.5v, SPP 1.5v Now here is the wacky thing - it previous failed at the same speed @ 1.5375v after 20h40m. The only difference were FSB 1.3, Ram 2.2v, HT...
- ThorAxe
- Post #165
- Sep 10, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

It seems to be more stable and require less voltage. Also Everest read, right and copy scores are much better. As I said previously, I was able to run ORTHOS without error @ 3.7GHz (462x8) 1.525v, ram 1066 5-5-5-15 for 1:38hrs before I stopped it since I don't want to run the voltage that...
- ThorAxe
- Post #118
- Aug 12, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

You should be okay provided your PSU has a good 12v rail and your video card doesn't take too much power. Just testing 7x505 = 3.538GHz @ 1.4437v, ram @ 1010MHz 4-4-4-12. ORTHOS stable for 18 hours so far... nCred: That's a great overclock for your voltage.
- ThorAxe
- Post #114
- Aug 12, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

Oops.... double post
- ThorAxe
- Post #112
- Aug 10, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

Hmmm...okay we will let you off this time...:) Tried 510.4 x 7 (3573MHz) 1.475v, ram 1021MHz 4-4-4-12 - but it errored in ORTHOS after 2h11m. :| Currently running ORTHOS @ 504 x 7 (3529MHz) 1.4437v, ram linked and synched @ 1008MHz 4-4-4-12 2.175v - stable for 21h33m so far. :) I've...
- ThorAxe
- Post #111
- Aug 10, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

I'm currently running 3.566GHz (509.5 x 7) 1.475v, ram @ 1019MHz 4-4-4-12. It has been ORTHOS stable for 40m so far...I am very happy with the 509fsb on the board. Temps under load are around 56C. I was able to run ORTHOS without error @ 3.7GHz (462x8) 1.525v, ram 1066 5-5-5-15 for 1:38hrs...
- ThorAxe
- Post #107
- Aug 9, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

That's an awesome overclock. I'm currently running ORTHOS at 512.5MHz x 7 = 3587MHz @ 1.475v (BIOS) 1.448 (actual) 1.416v (load) Ram is at 1025MHz 4-4-4-12.
- ThorAxe
- Post #90
- Aug 8, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

What's the vdroop on your voltage at 1.40v?
- ThorAxe
- Post #79
- Aug 6, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

That's 1.45v in BIOS (with vdroop it's about 1.41v to 1.4v under load). Note that the 8x462 was at 1.475v (BIOS). I'm currently running ORTHOS at 7x504 @ 1.45v (BIOS), linked and synched. It's been stable for over 16 hours so far. Ram is at 1014MHz 4-4-4-12 with 2.175v. For some unknown...
- ThorAxe
- Post #76
- Aug 6, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

Mine was not stable at 7x511 in ORTHOS as it errored after a 6 minutes, yet was fine in 2x32m of SuperPi. However, it was stable at 7x508 1.45v for 14h52m before it errored in ORTHOS. Ram was at 1016MHz @4-4-4-12. I've have also been able to run it at 8x462 @ 1.475 for over 15 hours before...
- ThorAxe
- Post #64
- Aug 5, 2007
- Forum: CPUs and Overclocking
T
E6750 Finally Arrived!

I had mine running ORTHOS for a few hours at 8x462 = 3698 1.475v (Bios). Here is the odd thing, I ran ORTHOS for over 26 hours before I stopped at 7x500 1.45v (Bios). It also ran at 7x508 in ORTHOS for 3 hours before I stopped it. I'm currently running at 7x511 = 3577 1.45v without error...
- ThorAxe
- Post #40
- Jul 30, 2007
- Forum: CPUs and Overclocking

RESOURCES

Top Bottom