Search results

  1. V

    ººººº--§§§§§§§--The Freebies thread--§§§§§§§--ººººº Part Cinq.

    http://forums.anandtech.com/messageview...STARTPAGE=14&FTVAR_FORUMVIEWTMP=Linear
  2. V

    ººººº--§§§§§§§--The Freebies thread--§§§§§§§--ººººº Part Cinq.

    ygpm
  3. V

    Which is a really good watercooling setup to get?

    masterkleer 7/16 $.38/ft @ mcmaster.com - suggest getting 20ft. you can do the inlet mod on the mcp350 yourself and save yourself some $$$ and it's not hard at all.
  4. V

    are their any fan temps/dba comparisons out there?

    http://www.madshrimps.be/?action=getarticle&articID=421 I tried the GlobalWin NCB 120mm from SVC.com they were pretty silent but I ended up getting led Yate Loons. I have 2 of the D12SM and one of the D12SL. The SL has more motor noise than the SM version. I'm still trying to find another SM.
  5. V

    Do I need thermal pads for Cooldrive6?

    I used them on my sata 300 but not on my raptor. both are fine in each cooldrive6 I do what orion23 does. I didn't even hook up the usb for the s/w.
  6. V

    My system is so quiet!

    but you can't hear them when your headphones are on. :)
  7. V

    Is this a good pump.

    I guess your going to be using an external then? for 10' of tubing, right? I did it with my 1st loop 3yrs ago. had my BigMama rad with a 120mm Sunon in the closet that had a window. It did work pretty good. I used a QuietOne 1200 pump. Don't even bother with those..they get real loud so don't...
  8. V

    Water cooling, radiator question

    hmmm.... so I guess this is 'atrocious' then?? my new rig pic 1 pic2 so what's wrong with heater cores? Lots of us have been using them for a long time...with great results. my diy blocks and 2-342 single pass keep my opty 148/7900gt at 24c/35c respectively...this is according to...
  9. V

    Petcock Drain system

    yep, exactly. sooo convenient. I hook up 1/4" tubing to the petcock and put the other end in a bucket. I remove my res plug and let gravity do it's work...drains right out. PushOn barbs are a brand/style of barb. go to page 244 the barbs are oversize to work with PushOn air hose...good...
  10. V

    Water Cooling v. Air Cooling in new build?

    yep! silence is and has always been 'subjective'. :)
  11. V

    Water cooling brand

    link is fine for me too maybe you need better cooling ;)
  12. V

    Water Cooling v. Air Cooling in new build?

    LOL. that's why I do it at work...have lots of down time ..no way can I do it at home..don't even have a garage or work bench/area to do anything.
  13. V

    Water Cooling v. Air Cooling in new build?

    if you want high performance, neither h20 or air will be silent. you will be able to get much more silence with h20 with the same performance as with air, tho. But high performance and silence can't be had...they'll always be some amount of noise. as for the 7/16" tubing over 1/2" barbs...
  14. V

    Petcock Drain system

    this is ultimately what you want http://users.rcn.com/nanikeala/watercooling/drainvalve.jpg http://users.rcn.com/nanikeala/ebay%20pics/wipnewrig%20008.jpg http://users.rcn.com/nanikeala/ebay%20pics/wipnewrig%20009.jpg 1/4" petcock drain to 1/2" PushOn barb I made it myself. I don't...
  15. V

    Wooden Case Plans

    you want wood?? - http://www.ocforums.com/showthread.php?t=449069
  16. V

    Question about processors w/ broken pins

    why would it take anyone 'several weeks' to fix a broken pin? it took me like 8 min to solder the wire on...had to be real steady with the wire. all you have to do is tin one end of it then use tweezers to hold it in place and touch the end of the wire and it'll solder on to the empty peg. then...
  17. V

    Question about processors w/ broken pins

    heya I posted on that thread and I fixed my s478 2.4ghz P4. it had 2 pins that were totally folded over!! I straightened 1 out and the other broke off. I have a cordless pencil soldering iron with a small tip. It was hard trying to find a something that was as small as those pins...the broken...
  18. V

    are there any quiet or semi-quiet 120MM fans

    I read that review and I got those Global Wins. If I didn't want to go LED, I'd a kept them. They are excellent and are very quiet. If they ever make an LED 120 NCB, I may go with them...but for now it's yate loon for me.
  19. V

    Clamps for tubing

    I've only used Masterkleer and I've never had (1)discoloration happen to me. you put the end of the tubing about 2 inches in hot water so (2)flexibility is not compromised. And (3)'particles'...that's news to me. Been watercooling since '04 and have never had any of these problems...
  20. V

    Watercooling computer guide

    my bad. I thought the storm and apogee were the same type...but I see that the base is on the Apogee is the same as the mcw6000. hah! I just picked up a mcw6000 for $10 and I'm getting rid of the aluminum top and I'm making an all copper top for it. yeah, a lot of ppl say filling via the...
  21. V

    Clamps for tubing

    yep..that's exactly right...but if you put a petcock drain in your loop then you won't have to cut any tubing
  22. V

    CASE FAN HELP!!!

    23c idle is pretty low. your room must be pretty cool. bix 2 or 3? there's lots of forums that you can find out what fans are best suited sound wise for your bix. try 7v your fans if you want them quieter then check your temps to see how much higher it'll be. yate loons don't have...
  23. V

    are there any quiet or semi-quiet 120MM fans

    I'll 2nd that. and the blue LED one's are super quiet. check this link http://tekgems.com/reviews/yate-loon-120-12-25mm-roundup.htm I had 2 120mm Global Win NCB fans also. a great pick there too. I'd have kept them if I didn't want LEDs....btw I like my window'd pc..
  24. V

    Yate Loon vs. Arctic Cooling 120mm fan

    http://tekgems.com/reviews/yate-loon-120-12-25mm-roundup.htm a test between the yate loon non-led and led versions. also, with a wannabe generic yate loon 120mm. I love my blue led yate's! I bought a generic red led wanna be yate loon and it definitely is louder than my 2 true yate...
  25. V

    Looking for new, high-performance yet noiseless WC set

    you need 1/2" x 1/4" or 3/8" NPT barbs. or you could get a 1/2" T and cut the barbs off. then shave down the 3/8" barbs on the pump you already have. Epoxy the 1/2" cut barbs over the shaved down 3/8" barbs...or you can do what cathar told me to do and put a 1" piece of 3/8" tubing over the...
  26. V

    watercooling coolant question

    nothing will cool better than straight h20. all the other stuf[water wetter, a/f, pentosin] is mainly used to minimize the chemical reaction between non-like metals in a loop, to keep bacteria from forming, and for looks. none of the 'additives' will make your system cool better...many tests...
  27. V

    CASE FAN HELP!!!

    can you post what your w/c rig consists of? there's a big diff when using rads or heater cores. eg. I'm using a 2-342 single pass heater core and 2 120mm blue led Yate loons on a Cool Drive 6. They also on a 1.75" acrylic shroud. I probably should be using stronger fans but I don't want...
  28. V

    Clamps for tubing

    if you use 7/16" ID x 5/8" OD Masterkleer tubing you won't need clamps. just put the tubing in boiled water and slip them over the 1/2" barbs. use black zip ties if you want to but they're not needed. yes, ss worm drive clamps have been used for w/cing for years and some people swear by...
  29. V

    Watercooling computer guide

    not sure but I think you have the inlet tube from the rad to the wrong barb on your Apogee...should be going to the barb in the middle that is directly over the core. also just a thought.. you should be able to cut down your tubing length if you mounted the pump on the mb tray just above the...
  30. V

    Help me decide my watercooling setup.

    go here if you want to know how to w/c http://www.ocforums.com/forumdisplay.php?f=71 read the stickies prior to asking questions..lots of info there procooling.com is also real good
  31. V

    Build me a watercooling setup

    get the same rad here for $29.99 http://store.yahoo.com/directron/icepro3.html suggest 7/16" tubing from mcmaster p/n 5233K44 @ $.38/ft. get 20 ft. to be safe. use a T-line instead of a res if want to save some money...
  32. V

    D5 pump & Ice pro III

    http://store.yahoo.com/directron/icepro3.html get this rad, a D5 and Storm or Apogee and you'll be just fine. go with 7/16" tubing with 1/2" barbs all the way around. Use a T-line to save money instead of a res. 3 undervolted San Ace, Delta's or 7v Yate Loons.
  33. V

    Barb or Fitting for Alphacool block

    welcome to the forums. here's some info for you - http://www.colder.com/Downloads/NPT.pdf hope this helps
  34. V

    Cool case for around $200 that will fit atop a Mach II?

    here's what I got- http://store.yahoo.com/directron/cf1009sw.html mega room and aluminum...the aluminum isn't thin either
  35. V

    Help leak how do i fix :-/

    post a pic if you can. teflon tape as a hole(not whole) fix...don't try that. teflon tape is for NPT threads and such. it's designed to fill the gaps between the threads.
  36. V

    The infamous "lian li v1000 koolance" with DD blocks all way round!

    try here for h20 cooling - http://www.ocforums.com/forumdisplay.php?f=71 or http://procooling.com/ lots of great info
  37. V

    wow Silentium T1 looks very impressive

    what's up with it not being able to upgrade to a bigger psu to run a 'real' gaming rig?? nice looking case but for I think it's overpriced if you can't install a 'real' gaming rig...ie using 7800gt and up.:(
  38. V

    Need Round Cables

    I rounded my own ide cables by seperating every 2 wires....never had a problem with emi/rfi...I mean, why would hd manuf. include a regular flat ide cable if it wasn't good enough? just my .02 :)
  39. V

    New build, need a Case with space and maybe water cooling in the future.

    http://store.yahoo.com/directron/cf1009.html I suggest this case. I got the one with the window...I'm water cooling it so I'm not worried about 'leaking' noise thru the window...I'm using 120mm fans on a rheobus.
  40. V

    Cutting acrylic

    how big a hole do you need it to be? you can use a hole saw. I would suggest taking the door off, taping the whole surface with painters tape..thats front and back. then when using the hole saw you'll need to keep the saw cool when you cut it. don't go too fast and use lots of lubricant. I...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |