I recieved the candles from Lunacandles very quickly and it was packaged quite well. They seemed smaller than I expected, but over all its probably the right size.
Thanks!
The Gizmo does all the work. It is instructed to go to SR's servers every so often to check for updates and if there is one to download the configuration and update the gizmo.
This includes but not limited to, software updates, firmware, specific configuration to your account ect...
I had an issue all day long since I was working on it with tech support the afternoon int othe evening of the day I got it then all day and into the evening on the second day.
I will be monitoring my connection too but I don't think I use my line as much so unless I begin getting many calls...
I signed up for Sunrocket too a week back and got my kit quickly.
Phones look great and lots of feature.
One thing I had a problem right away with was getting the Gizmo to work behind my router.
Well after checking everything from Port Forwarding, Firewall settings (disabled even), and...
The true meaning of Christmas is in sharing and love, in fellowship and togetherness. It is in spreading the warmth in our hearts to touch the lives of others with joy and good cheer. Hope you have a very merry christmas
The true meaning of Christmas is in sharing and love, in fellowship and togetherness. It is in spreading the warmth in our hearts to touch the lives of others with joy and good cheer. Hope you have a very merry christmas
The true meaning of Christmas is in sharing and love, in fellowship and togetherness. It is in spreading the warmth in our hearts to touch the lives of others with joy and good cheer. Hope you have a very merry christmas
The true meaning of Christmas is in sharing and love, in fellowship and togetherness. It is in spreading the warmth in our hearts to touch the lives of others with joy and good cheer. Hope you have a very merry christmas
The true meaning of Christmas is in sharing and love, in fellowship and togetherness. It is in spreading the warmth in our hearts to touch the lives of others with joy and good cheer. Hope you have a very merry christmas
The true meaning of Christmas is in sharing and love, in fellowship and togetherness. It is in spreading the warmth in our hearts to touch the lives of others with joy and good cheer. Hope you have a very merry christmas
The true meaning of Christmas is in sharing and love, in fellowship and togetherness. It is in spreading the warmth in our hearts to touch the lives of others with joy and good cheer. Hope you have a very merry christmas
The true meaning of Christmas is in sharing and love, in fellowship and togetherness. It is in spreading the warmth in our hearts to touch the lives of others with joy and good cheer. Hope you have a very merry christmas
Promotion Good: 4/1/2004 - 8/31/2004
For candidates who take one of the following exams and do not pass it, Microsoft is offering a second chance for FREE! This offer is available to candidates in the US only. Candidates who fail an exam (within this offer) between April 1 and August 31, 2004...
http://www.shavlik.com/
This company worked with Microsoft to create their Baseline Security Scanner.
Very good indept tool and can push out the patches too.
You can also do a Microsoft SUS server if you get ambitious.
Actually WEP, WPA encrypt the data portion.
TKIP helps randomize the temporary key once the session has been authenticated. It also has other anti-replay attack and other CRC checks to verify packets were not tampered with.
Its all about tweaking the data and segment sizes to get the most performance out of the fixed network as possible.
If you can't change the MTU then work with it by manipulating the data or frame size.
In most cases the defaults should be fine but if you need to squeeze in more performance you...
We run dual DHCP servers in every location. It should not matter for DHCP protocol uses multiple handshakes before an address is assigned. Its not just a request that gets the assignment of the lease but the communication back and forth between server and client to establish an IP and a lease...
The TCP MSS value specifies the maximum amount of TCP data in a single IP datagram that the local system can accept (reassemble). - from Cisco
So in this verse this should mean that the MSS value is the value you are setting as being the largest IP datagram size (not including the IP Headers)...
Actually I saw the Virtual Replicator but I wasn't sure what it did.
I would imagine that for now that would be your best bet but I would check with EMC and IBM on their new software also.
Currently SANs are pretty proprietory in their software and SAN configuration options tied to the software.
EMC and IBM are working on SAN management software that should be cross vendor capatible but is not ready for prime time yet.
EMC has their own software that will create Mirrors and...
To do dual redundant DHCP servers for redundancy you have to design it so that each server has a scope large enough to handle the entire population of PCs as if it was the only DHCP server.
There is no communication between the servers and because of the way the addresses are assigned you can...
Is this across the WAN or on LAN segments?
Do you use DHCP Relays?
You can always test your theory whether the server 1 would host if server 2 goes down by turning off DHCP on server 2 after all.
One server hosting the majority of the lease is not bad. Actually it could be good since only...
Few Questions:
1.) are you able to bring up the web page and the TS Web Interface?
2.) What address are you trying to connect to when you are in the TS Web interface?
3.) is TS Web and the TS Server on the same server?
4.) Does TS work when you are at home from another machine?
Well ain't that something. In trying to obtain the IOS to get GLBP feature set I end up finding out GLBP is only availble currently on Routers not L3 Switches.
Shoot.. now back to the drawing board.
Any other ideas? that one would of worked with a small contingent plan but now that the L3...
After speaking with some of my engineers at cisco they can't think of doing anything to prevent the issue I will have if a core switch dies. I will lose 1/2 the WAN bandwidth no matter what in this setup.
routing protocols will keep the network online but I will need to get either another...
One thing I thought of. If we had a core switch failure then we would effectivly kill 1/2 of our WAN bandwidth. Not good.
Any way to avoid this when a core switch dies? Thinking.. thinking..
Does CEF help on a L3 core switch? or maybe what I am most interested in is, will it help in my core switch scenerio?
One thing I am also tackling with right now is how exactly will the GLBP work if the server is only connected to or talking to just one of the switches at Layer 1 (Active NIC...
Well bgroff, that was a configuration I came up with after hearing about GLBP. I was hoping to get confirmation whether that is the best solution for what I am doing.
And you are correct about the access layer being 2950s coming into the 4506s.
So the consensus is to leave route caching on...
EIGRP within the core, No OSPF.
Down to the other datacenter we have no sharing or dynamic routing just static routing.
Within the L3 core there currently is just two L3 cisco 4506 catalyst switches one sitting there just for failover at the moment but we are looking either at HSRP or this new...
So in the case where I need to get better balance between two routers and I am using an L3 switch as the user's default gateway should I make the two L3 switches default route for the destination network be a certain core router and then do some sort of dual group HSRP on the routers for...
right now our situation is that we have 2 IMA groups at our location each 3Mbit bonded NxT1.
At our other DC we have two T1 not bonded so all in all we have the following:
----3Mbit--------------------- 1.5Mbit---
----| |---------...
My goal is to delay any need for additional WAN links or Bandwidth voodoo magic bonding at this point.
We currently have 2 cisco 4506 at the core and 2 cisco 3745 at the edge.
Each 3745 hosts two IMA groups that can each know how to get to a Datacenter but do not check each other for load...
If you set your time to live for all your records to a low amount <24 hours then your approximate propagation delay is usually 24-48 hours.
Depending on what your current time to live is you have to do this in advance that number of hours/days to ensure you propogate the new time to live out to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.