Search results

  1. Y

    How do I change the CMOS-battery? Can't get it loose!

    Thanks for the tip, I will try that when I get home!
  2. Y

    How do I change the CMOS-battery? Can't get it loose!

    Hi, My CMOS-battery seems to be dead, since the BIOS resets everytime the power is turned off. However I have a problem replacing the old battery with a new one, since I can't seem to figure out how to remove the old one! I have uploaded some pictures here. If anyone has any tips, please...
  3. Y

    Problems getting a new IP after laptop sleep mode (WLAN)

    I have a Belkin 54 mbit wireless router, which generally works perfectly with my Acer laptop (built-in WLAN). However when the computer has been in sleep mode (which turns the WLAN off), it sometimes take 20-30 minutes before I get a new IP-adress from the router. This can be really annoying, so...
  4. Y

    Overclock utility for GeForce 7600GT ?

    Where can I download coolbits? It is a registry-hack, right? I would like an app that can overclock the card when I run certain games, and keep it at stock otherwise.. Is that possible?
  5. Y

    Overclock utility for GeForce 7600GT ?

    Just replaced my Radeon 9800 with a GF 7600GT, and need some tips for good overclocking programs for new Nvidia cards...
  6. Y

    I'm a bit worried about my temps

    I have a A64 3500+, and was wondering if the max temp is about the same on my A64 as for the opterons? Right now I'm running it in: CPU: 10x250 = 2500 RAM: 5/6 * 250 = 208 HTT: 4x250=1000 I have the retail cooler and stock voltage (1.40V). I get 44-45C during Prime95 Torture test...
  7. Y

    Overclocking A64 3500+ on Asus A8N-E

    Hmm, I seem to have gotten quite a good sample. Running 10x250 now, with 5/6 memory divider and 4 HTT multiplier, thus memory @ 208 Mhz and HTT @ 1000 Mhz. 1.40 V. Running Prime95 torture test "blend", and been stable for about 1.5 hours now. The CPU temp max out at 45C. Is this too high...
  8. Y

    Overclocking A64 3500+ on Asus A8N-E

    Well, I think 2640 will be a bit too high for my stock cooler and average ventilated case (2 fans in, 2 out, all low rpm). But it would be nice :)
  9. Y

    Overclocking A64 3500+ on Asus A8N-E

    Should I lower the HT-multiplier from 5 to 4 if I run 10x240? Is it ok to have my SATA HDD connected to port 1 ? dwcal: Thanks for the tip, I will try it!
  10. Y

    Overclocking A64 3500+ on Asus A8N-E

    Hi, I need some help overclocking my system. My cpu runs att 2200 Mhz (11x200) default, and my goal it to get it up to 2400, which is 11x218. I guess/hope that my Kingston value PC3200 can run @ ~440 mhz with slow timings, so I hope to keep a 1:1 FSB:RAM ratio. My problem is that I...
  11. Y

    Weird chassis-fan problem...

    The weird thing was that I never had this problem on my old Abit AN7 (Nforce 2 Ultra 400). I tried increasing the rpm to the limit I accept (~2000 rpm) noise wise, but that wasn't enough to get it started. Zepper: I have the ASUS Q-Fan disabled, so it shouldn't be interfering (sp?)
  12. Y

    Weird chassis-fan problem...

    I have a Enermax 80mm chassis-fan, where you can control the fan-rpm with a little nob that you turn. When I connected this fan to my new mainboard, an ASUS A8N-E, it didn't start. I connected it to the CHA1_FAN-header, which is the one closes to the intake fans in the front. The weird...
  13. Y

    Retail cooling A64 3500+ vs A64 4000+

    Just got a A64 3500+ retail, which runs at 39-40 degrees C under max load. Was thinking of bumping it up to 2.4 Ghz. But I was wondering if you get a better cooler with the 4000+? Seems my cooler is quite good, because I don't think 31-34 C idle and up to 40 C max load is that high...
  14. Y

    Windows thinks my primary SATA HDD is a removable device

    Hmm, ok. Didn't know that hehe
  15. Y

    Windows thinks my primary SATA HDD is a removable device

    Just got a A64 3500+ on a ASUS A8N-E (NForce 4 Ultra). So I installed windows XP SP2 on my primary drive (200 Gb Maxtor SATA), and now I have in the right corner of Windows the "safe removal of hardware"-icon (direct translation from swedish hehe). The one you get when you plug in an USB device...
  16. Y

    Does Athlon 64 3500+ use dual channel DDR?

    I just noticed that I put my two DDR-sticks in the same channel on my mainboard (Nforce4 ultra). But I seem to remember that A64 can't utilize dual channel DDR anyway? But that was maybe only valid for the first versions of the A64, and not the S939 ones?
  17. Y

    URGENT: Question about ATX 20 and 24 pin connectors.

    Connected the 4pin, and now the computer posted :) Installing windows right now, but I will pick up a better PSU next week anyway...
  18. Y

    URGENT: Question about ATX 20 and 24 pin connectors.

    The 4 pin connector has 2 black wires and 2 yellow. I have a special 4pin connector on the mainboard with 2 +12V and 2 GND. I should connect it there, right? And not on the 4 free slots of the 24slot connector?
  19. Y

    URGENT: Question about ATX 20 and 24 pin connectors.

    Ok. But the problems I described sounds PSU-related, right? One thing that is a bit strange is that the fan on the 7600GT started, but I still got no picture... Edit: spelling
  20. Y

    URGENT: Question about ATX 20 and 24 pin connectors.

    Well, I connected everything and booted up. Some fans and harddrives started, but not all fans. Also, I got no picture on the monitor. I was afraid my crappy 400W Aspire PSU wouldn't handle an Athlon 64 3500+, a Geforce 7600GT, 2 HDDs, 1 DVDburner and 5-6 fans. When I unplugged an...
  21. Y

    URGENT: Question about ATX 20 and 24 pin connectors.

    Thanks! After reading the thread, I figured out I could connect the 20 pin cable to the 24 pin mainboard. I made sure that I left the end with +12V, +5V, +3.3 and GND open. And the cable didn't even fit on that end anyway...
  22. Y

    URGENT: Question about ATX 20 and 24 pin connectors.

    Thanks for the reply. Is that the only solution? It is not possible to connect the PSU anyway?
  23. Y

    URGENT: Question about ATX 20 and 24 pin connectors.

    I'm in the process of installing my new Athlon 64 on a new Asus Nforce 4 ultra mainboard. When I a moment ago was supposed to connect the power from the PSU to the mainboard, I noticed that the cable has 20 pins and the mainboard has 24. Does this mean I have to replace my PSU? Also, should...
  24. Y

    Upgrade advice

    Will it be necessary for me to reinstall windows after the change in mainboard,cpu and gfx-card? In Win98, it was very needed, but maybe not in WinXP?
  25. Y

    Upgrade advice

    I've decided I need to upgrade my computer. Right now I have: AMD Athlon XP Barton 2500+ @ 3000+ Abit AN7 Nforce2 Ultra400 2x512 Mb Kingston PC3200 DDR RAM ATI Radeon 9800 SE 128 Mb 1 SATA HDD 1 IDE HDD 1 IDE DVD-burner 3st 80mm + 1st 92mm fan 400W Powersupply (I got it with my Aspire...
  26. Y

    S-ATA drivers in WinXP SP2?

    The thing is that I will buy a new (S-ATA) harddrive soon, which will be my new main drive. So I thought I would wait for SP2 if it were to include S-ATA drivers, which I heard a rumour that it was going to... Edit: Found the post about slipstreaming, so I don't need the floppy anyway! Thx for...
  27. Y

    S-ATA drivers in WinXP SP2?

    Does anyone know if they will be included? It would be really great, since I don't feel like putting a floppydrive in my comp just for the windowsinstall....
  28. Y

    Old drivers for MS Intellimouse Explorer

    I recently installed Intellipoint driver version 5.0, and then I noticed that you no longer can set explore to the large thumbbutton on my Intellimouse Explorer. They just removed that option. I have looked all over the internet for an older version of the driver, for example 4.0, but I could'n...
  29. Y

    How do you enable mouse acceleration in WinXP?

    anyone?
  30. Y

    How do you enable mouse acceleration in WinXP?

    So what do I do? My mouse is WAY to slower then I want it.
  31. Y

    How do you enable mouse acceleration in WinXP?

    ??? I can only change speed in the options. I have a Intellimouse Explorer (old one) with Intellipoint 4.0 installed running on WinXP Pro.
  32. Y

    Increase mouse speed?

    Hmmm, that option isn't avaliable....
  33. Y

    Increase mouse speed?

    I have a MS Intellimouse Explorer connected to the USB-port (the old one) and I'm running WinXP Pro. I also have Intellipoint 4.0 installed. I have set the mouse speed to max in the mouseoptions in the control panel and I also have increase precision checked. My problem is that I think the...
  34. Y

    5563 3dmarks with gf3 + xp 1800+

    That score is too low. Try reinstalling windows. I get low 7000s with my rig (celeron-II @ 1577, 384 Mb SDRAM @ 131 Mhz, GF3 Ti200 @ 230/540)
  35. Y

    120 gig partition in NTFS?

    Great, thanks for the replys!
  36. Y

    120 gig partition in NTFS?

    I will get a 120 gig Maxtor drive in a few days, which I will mostly use for storing big files (=divx). I was wondering if I loose a lot of space if I make one big partition of it.
  37. Y

    Who makes the best/better motherboards?

    I'm running my third Abit board right now, and they have all be 100% stable and great overclockers. I have to recommend ASUS and Gigabyte as well, they are generally very high quality.
  38. Y

    Which upgrade is better "GF3 ti500" or "GF3ti200+faster CPU"?

    Option B, hands down
  39. Y

    Giga-Byte = Good Reputation?

    Most small system builders where I live use Gigabyte so they can't be all bad ;) I am however Abit all the way !
  40. Y

    is it worth upgrading my GTS?

    My old GTS did 230/370, but I got a GF3 Ti200 some weeks ago, which run perfectly @ 230/540. I think the upgrade was worth it, becasue now I can run all new games (except Medal of Honor demo) @ 1024x768x32 with quincuiz and aniso and still lie WAY over 60 fps all the time :)
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |