Search results

  1. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    Nothing cautionary. It is the latest and what I have been running for over a year now atleast. The Magic Bios is a program you install and run it in Windows. It's a small window, load it up, and hit the C to check for a new bios version. If it finds one you hit the button below the C and get...
  2. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    I've never had a problem using the Magicbios. I used it several times and I have the latest bios. IMO it works flawlessly. That's what I would suggest. Looks like you may have taken the last Toledo 4200 because newegg stock is out at the moment.
  3. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i have the 4 x 512 and dont have any problems with my ram (corsair vs). i use the factory timings and you have to use 2T. BF2 and fear combat run totally fine. FYI, i also have my 3000 o/c'd to 2.4 and still no issues.
  4. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i have never touched my chipset voltage away from 1.5, when overclocking or not. i haven't had any problems with it, so i haven't had to.
  5. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i just shut down my main programs. i use my router as my firewall so i don't have a software one. i also don't shut down my anti virus. i haven't had any problems yet. if you use a router there's no point in the extra firewall. sounds like your firewall and/or spy sweeper should do the...
  6. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    the best thing to do is remove all nvidia drivers, except display, reboot, cancel found new hardware, and install the drivers that you already downloaded. that's it; but yes, reboot is recommended. as for the site, i haven't seen any issues. just nvidia.com, find your driver, that's it...
  7. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    6.86 is the latest; released july 06. only the latest drivers come up on the search. if you have 6.70, what are you confused about? it shows the number at the top after you select nforce/nf4 amd/winxp, Go.
  8. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i guess i'm a perfect example. i recently installed a second sound card in the bottom pci slot to compare it to my other one, which i disabled. i noticed the other day that it and my vga are sharing IRQ 18. i am having no problems whatsoever though. i'd say it was because you had two video...
  9. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    in the end, it's your fault for not RMA'ing it. contact epox support. have you messed with the bios settings? tried usb 1.1? do you have the service packs installed? install latest nforce drivers correctly? i would recommend not installing the firewall/active armor or the NAM. i...
  10. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    update your bios. if that doesnt work then you shouldve returned it
  11. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    usb 2 problem is fixed. you guys need to update your bios's and drivers. whipper, i have had no problems with my 4 sticks since march, even when overclocking my cpu. get all of the updates and run at stock settings. bet it won't crash then. i mostly run bf2 but have played fear combat...
  12. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    have you checked your voltages? make sure they're high enough? could you have a bad power supply or not enough juice?
  13. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    240 x5 = 1200. way too high. HTT should = 1000 or less. try x4, bet that'll work for ya.
  14. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i dont see how your xp got fried. could you get back into the bios? try raising voltage a bit? try a hard boot on your pc? i had to with mine a couple times. did you try reset cmos jumper? i bet if you wouldve done some of these that you would not have to do a xp recovery. i'm sure it...
  15. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    your voltage and temps seem way too high. best thing to do like i did is turn off auto vcore. it doesnt need near that much and is probably hurting the life of your cpu. the smartfan has temps settings in increments of 5, with 35 being the lowest so thats where i set mine. i havent seen...
  16. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    as fast an AMD as you want. it supports 64, FX, and X2s. i oc'd my 3000 venice the other day to 2.4GHz. my voltage is between 1.43-1.47. i plugged in some numbers into gogar's and this is what i used: 300 cpu freq, 8x cpu multi, DDR266 memory divider, and HTT multi 3x. with a full load...
  17. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    oh really? quote from AMD: Q: Why is the AMD Athlon? 64 FX-53 processor offered in a 939-pin package? A: AMD believes in bringing to market customer-centric technology that benefits partners and end users. By offering the AMD Athlon 64 FX-53 processor in a 939-pin package, AMD is...
  18. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    use the magic bios utility that came with the mobo to flash through windows. those aren't beta on the site, if you prefer, and there have been two more releases since 12/05. the latest is dated 4/06.
  19. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i would set your HTT to 4x and see what happens. it may be that your ram will only be better for overclocking. that way it can run at stock speeds. you might be lucky it booted. at 250 x 4 would equal your hypertransport bus, but your memory wouldnt technically be overclocked. if you got...
  20. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    check your usb bios options. if you have winxp, then disable usb mouse support.
  21. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    no, you dont have the latest bios. and it should fix it if it is a usb issue. maybe your mouse could be bad if the new bios doesnt work? youre the first usb mouse problem ive heard on this thread.
  22. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    wow, i would be stumped too. i was actually thinking about getting a usb kvm switch before. eek :( lol IF i were you, I would email epox tech support and ask them what's up. have you searched around forums for problems with kvms?
  23. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    viremia, i'm assuming the mouse and keyboard work individually with the mobo, and your bios is set for usb v1.1 and 2.0? did you install mouse and/or kvm drivers? davegod, if it was me today, i would get a step above pc3200 ram atleast. that way you know there will be no bottleneck there...
  24. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    ya, it's got different voltage settings. you must have your vcore on auto. it's said this board gives it extra juice on auto. i took mine down a bit but for the longest i just left it; there is no problem. i feel ya on the voltage thing. they all say different for me too, even with...
  25. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    yes, its supposed to cycle through and get to FF. So yes, FF is a good code IF it cycles through, POSTS and gets to it. other than that its fatal. do an RMA like i recommended before. you just got bad luck this time and got a bad board. it could also be your RAM. have you tried a...
  26. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i've never heard of someone having that prob, but i know what it is. either your chipset is bad or it is not functioning right. safe to say it is DOA. i would start your RMA process. good luck
  27. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    FSamir, to free up some of your IRQs, go into bios and disable the IDEs and SATA ports that you are not using. if you are using them or do not want to do it that way then go into bios, find IRQ RESOURCES SHARING?, it should say auto, change it to manual and place them where you want using the...
  28. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    imhungry, here you go. best price; zzf has it for 10.99 http://www.newegg.com/Product/Product.asp?Item=N82E16835118214
  29. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    noone can help me with my issue?
  30. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    imhungry, yeah sure you can, but your system will fry from the heat most likely and a big performance downgrade. someone else had the loud fan also. i recommend buying the zalman heatsink then, if i was you. newegg of zzf should have it; it's a big blue square hs.
  31. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i have a few questions and concerns that hopefully someone can help me out with. in the dram config, what is the recommended burst length/speed? mine is set at 4 i think. the other options are 2 and 8 i believe. the setting is at the bottom. the reason i ask is because i'm getting a lower...
  32. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    the reset is only for the operating system. it does not reset power. if i were you i would unhook everything that doesnt need to be and try again, ie fdd, usb headers, pci cards, and whatever else not required to boot. just leave hdd, disk drive, and video card in. also make sure the...
  33. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    what do you mean by system fully configured? did you try to load the OS again/new from scratch?
  34. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    just FYI, i had to turn off my external usb drive in order to run pcmark05 or 3dmark06. it would BSOD even before the program even started up fully. i just ran pcmark and my score was 3184 (@ default). what kind of scores is everyone else getting?
  35. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    still dont get it. and there is no readme file(other than an unknown file type). y cant it just be easy.
  36. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i have the regular memtest86. i found the + but it is a .iso. im not familiar with the use of it. do you have a link to the program itself, to run from the desktop?
  37. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    i have a couple issues, maybe someone can help. something with my ram config. i now have 4 x 512. when i run 3dmark i get a lower score than i did with 2 x 512. why is that? is there something i need to change? second, when i try to run memtest, it gives me this message: Your version of...
  38. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    yeah i already checked that. i thought that was the case, but now im not using all of them nor are any sharing.
  39. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    thanks ridefree im still trying to figure out why my system freezes, sound loops, and i get disconnected from a bf2 server when i hit the join game button. its baffled every one i know. it usually only happens after a reboot but works when i load the map again. its just so frustrating. i...
  40. S

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    you mean like how they havent released a bios (like that beta) since jan. 3? yeah does anyone know if disabling the primary ide slave channel cause a performance hit or anything? ex. just leaving the hdd hooked up to the master. i figure if youre not using any or all the other channels y...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |