I used 4.27 instead of 5.11 of the nForce drivers and it worked. For some reason ATi Catalyst COntrol Center does not work though so I can only have the display driver installed, also the computer will not shut down. It just freezes when it says: shutting down. It does this every time without...
First of all it is my second computer so I am on my main one now; that is how I am on the internet. Also I am installing the nVidia chipset drivers that have nothing to do with my video card so I do not see how it would have to do with the video card drivers considering I haven't even been able...
The rig
Gigabyte K8NSP mobo (F13 bios)
AMD Sempron 2800+
768 PC 2100 (512 kingston / 256 crucial)
120 gig Maxtor Dimond Max Plus 8
Radeon 9800 Pro (r360 core flashed to XT)
SB Audigy 1
BenQ DVD-RW
MSI 48x CD-RW
431w Enermax Whisper
Windows XP Pro SP2
I used this rig with an asus...
GA-K8NSC-969, thats my mobo. I have an Athlon 64 3000+ Venice that was previously OC'd to 3500+ 2.2ghz (245FSB 1 / 1.66 mem 4x HTT 1.45 vcore) I changed it to: 301FSB 1 / 1.33 mem 3x HTT and 1.55 vcore and now when I boot it posts and recognized my processor and hard drives but when it goes to...
I seem to notice a bit more fuzz with the A2 value than I did with the Audigy 1 in some of my mp3s but I am not to sure if it is just me listening harder for it than I used to.
I have and Audigy 1 and needed a sound card for my other so I bought an Audigy 2 Value OEM, which one is better? I put the Audigy 2 Value OEM in my main comp and I am not to sure if it is better or worse....
Any comments / suggestions?
To the best of my knowledge this problem just started happeneing after I flashed it to the latest firmware and unfortunately when I try to flash it to an older firmware version it just says "flash failed".
1 out of 3 times (usualy) after or during the windows XP startup screen I get a quick...
Well I decided that I would just install windows again because it is always good to have a fresh install especially if I am going to a new HD and especially from IDE to SATA. Thanks to all of you guys who provided this information to me and it will not go unused because I will migrating windows...
I finally got a SATA hardrive and want to move my whole system and its contents from my IDE drive over to the SATA and then make the SATA the master. I really do not want to deal with re-installing windows and all my programs. Now how would I go about doing this?
Also a quick side note: my...
I was just wondering if anyone could help me with overclocking using a GA-K8NSC? The overclocling options are just horrendous and I really don;t know what to do...
I have an AMD 3000+ Venice core and it is sapposed to overclock just nice.
Yah it is control F1 and all I found was Fid Control or something and the highest was "x9 1800mhz" but I want to go further than that.
CPU-Z says everything is ok but my memory frequency is 164 when it is sapposed to be 200, can I do anything about that?
Sorry I have a couple threads going in other forums and thought I had said what mobo I have. It is a GA-K8NSC-939, I am at work still so I have not used CPU-Z and I don't know if I have cool n quiet on, to tell you the truth I don't really know what that is.
I ran Sandra and it reports my CPU is running at 16xxmhz (I can't rmeber exactly what it was since I am at work right now) and when I go to properties on my computer it says it is running at 1.81ghz and the MAD site says it is sapposed to run at 1.81ghz also testing my cpu in Sandra it did just...
Ok guys I pretty much read most of this thread and all I can say is wow, I am never getting Gigabyte again. EVER.
So with that aside I have the GA-K8NS Pro and have the memory problem aswell (obviously). I have 2x512MB Corsair XMS PC3200 CL2 RAM and it runs at 166 and I cannot get it to stay at...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.