Search results

E
Continous Beeping

Bought a cheap stick of generic RAM, it posted...so this week I will get some good corsair, and be back to things in no time. Thanks Again...
- Ejhocky313
- Post #10
- Nov 18, 2007
- Forum: Computer Building
E
Continous Beeping

I put a new motherboard in....same thing, so I guess rules out the motherboard, although I will be keeping the new motherboard. I am going to try to get my hands on some other RAM and go from there... Thanks to all for your help.
- Ejhocky313
- Post #9
- Nov 18, 2007
- Forum: Computer Building
E
Continous Beeping

perhaps, but...It was never technically overclocked. and to further this I bought a new Power Supply, and it is still doing the same thing....the next thing I will try I guess is a new motherboard...
- Ejhocky313
- Post #5
- Nov 16, 2007
- Forum: Computer Building
E
Continous Beeping

How could the CPU have been damaged? wouldn't it just not start up, I mean it's not like I had some outrageous vCore set.
- Ejhocky313
- Post #3
- Nov 16, 2007
- Forum: Computer Building
E
*** Official Gigabyte P965-DS3 Thread ***

I posted in this in the help section, but maybe those who have the same Motherboard me can shed some light... Last night I was trying to do a little over clocking on the computer and I ran into a couple of snags on the way. It was all fine and dandy though because on my Gigabyte motherboard...
- Ejhocky313
- Post #2,105
- Nov 16, 2007
- Forum: Motherboards
E
Continous Beeping

Last night I was trying to do a little over clocking on the computer and I ran into a couple of snags on the way. It was all fine and dandy though because on my Gigabyte motherboard, if it doesn't start up right the first couple tries it will reset the computer BIOS. heres where the problem...
- Ejhocky313
- Thread
- Nov 16, 2007
- Replies: 10
- Forum: Computer Building
E
Netgear ADSL+ Router with Cable Modem

I was given the Netgear ADSL+ DG834G Router as a gift, and I havn't used it yet, as I move from my wired router to wireless. My question is if I have a cable modem (Charter) can I use this router or will I run into snags/incompatability. Thanks for the advice, if it doesn't work I will try...
- Ejhocky313
- Thread
- Jun 15, 2007
- Replies: 1
- Forum: Networking
E
*** Official Gigabyte P965-DS3 Thread ***

Same results here, changing the PCIe frequency yeilds no results whatsoever...I will remain (semi-happy) at my overclocked 2.7 GHz state until there is possibly something else to try. I am not getting anywhere and I have tried everything.
- Ejhocky313
- Post #1,980
- May 22, 2007
- Forum: Motherboards
E
*** Official Gigabyte P965-DS3 Thread ***

Well, Following that guide I have ran into many problems as well...For some reason everytime try to get to 3.0 Ghz with my E6600 I can't post and it will restart the computer and reset it the previous BIOS setting. should I need to go more than +.01 on the FSB, MCH, and PCIe? I Have the...
- Ejhocky313
- Post #1,978
- May 22, 2007
- Forum: Motherboards
E
*** Official Gigabyte P965-DS3 Thread ***

Hello all! I just recieved this board on friday and installed everything without a hiccup (specs are in my profile sig) This if my first intel build since the Pentium 2, and I was writing this to see if someone could point me in a direction of how to overclock it. I did a few searches, but...
- Ejhocky313
- Post #1,964
- May 20, 2007
- Forum: Motherboards
E
VISTA "Limited Connectivity" for 10-20 minutes from start up

Well, a little help from the anandtech boards pays off again, that driver seemed to fix the annoying promblem. Thanks!
- Ejhocky313
- Post #11
- Feb 9, 2007
- Forum: Operating Systems
E
VISTA "Limited Connectivity" for 10-20 minutes from start up

I got the latest Firmware for the Router... The Asrock board is a ULI chip, so yes indeed... I will try these when I get home, and report back thank you Eric
- Ejhocky313
- Post #9
- Feb 9, 2007
- Forum: Operating Systems
E
Microsoft Vista+Linksys WRT54G V.2=No internet

What is the DD-WRT firmware? is it for the router? Thank You!
- Ejhocky313
- Post #3
- Feb 9, 2007
- Forum: Networking
E
VISTA "Limited Connectivity" for 10-20 minutes from start up

Hey that's the same promblem I am having!!! I Posted something about it in the Networking section: http://forums.anandtech.com/messageview.aspx?catid=36&threadid=2004178 Anyone figure out how to fix this, it's annoying... Do I need a new Router, or a PCI NIC card?
- Ejhocky313
- Post #4
- Feb 9, 2007
- Forum: Operating Systems
E
Microsoft Vista+Linksys WRT54G V.2=No internet

Ok, this is the first time I have posted in the networking section, and I'm hoping this is the right place for my question. Here is what is going on: My router (Linksys WRT54G V.2) has worked flawlessly since I bought it a few years ago, all up until yesterday, when I made the move to windows...
- Ejhocky313
- Thread
- Feb 9, 2007
- Replies: 3
- Forum: Networking
E
ASRock 939Dual-SATA2 - Socket 939 with PCI-E and real AGP and Socket AM2 upgrade path

Anyone with the 939Dual-SATA2 board fully go over to Windows Vista? Have any errors with the SATA2 driver or the onboard NIC? In was thinking of upgrading to Vista but I don't want to have errors.
- Ejhocky313
- Post #1,651
- Feb 1, 2007
- Forum: Motherboards
E
Flexibility...Memory?

Can anyone explain to me what the flexibility setting is on this motherboard? For some reason I don't think I can disable it, is it slowing it down alot when i have it enabled? pros/cons? Thanks in advance!
- Ejhocky313
- Thread
- Aug 8, 2006
- Replies: 1
- Forum: Motherboards
E
ASRock 939Dual-SATA2 - Socket 939 with PCI-E and real AGP and Socket AM2 upgrade path

Ya, COD2 is very grapics intense, I have a 7800GT and it still can give me a lil lag in some spots, it needs the best card in order to get real smooth frame rates. there is a cod forum I belong too though where you can get information if you want to, about configuring the game better...
- Ejhocky313
- Post #1,035
- Jan 23, 2006
- Forum: Motherboards
E
AGP Aperture size??

I have heard to set it at half of what's on the video card...But I'm not sure, anyone else know much about this?(bump)
- Ejhocky313
- Post #3
- Dec 15, 2005
- Forum: Graphics Cards
E
PSU for a System

Oh that's cool, thats kind of what I was looking for, thanks for the help guys!
- Ejhocky313
- Post #6
- Dec 6, 2005
- Forum: Computer Building
E
PSU for a System

I know there are a lot of threads like this on here but I just dont know which one I can relate to the most. I am planning on upograding my video card around christmas time, to a (PCI-EX.) EVGA NVidia 7800 GT, and I am migrating from a radeon 9800 Pro (AGP). I have an Antec True-Power 430 Watt...
- Ejhocky313
- Thread
- Dec 6, 2005
- Replies: 5
- Forum: Computer Building
E
Cloning HDD

Hope this the right place for a topic like this, I wasn't sure. Here's the deal: I got 2 new HDD's (SATA western digital Raptors a 36 and 74 GB) and I have one HDD in my computer as of right now(EIDE 80GB), so what I did was install Norton Ghost 9.0 and I cloned 1 HDD to the other (the PATA 80...
- Ejhocky313
- Thread
- Nov 3, 2005
- Replies: 0
- Forum: Computer Building
E
EPOX 9NPA+ Ultra and the Big Typhoon: Installation Tips?

well, thermaltake didn't include a backplate with mine...maybe you just were lucky to get one I had to buy one from them, it looks like this one.. http://www.thermalright.com/product_default.htm Accessories>K8 motherboard backplate **Edited for link**
- Ejhocky313
- Post #8
- Oct 19, 2005
- Forum: Cases & Cooling
E
EPOX 9NPA+ Ultra and the Big Typhoon: Installation Tips?

Im not sure about the Epox if it does or not, but a backplate didnt come with my motherboard and I had to get one from thermaltake because, the big typhoon doesn't come with one stock.
- Ejhocky313
- Post #4
- Oct 18, 2005
- Forum: Cases & Cooling
E
EPOX 9NPA+ Ultra and the Big Typhoon: Installation Tips?

I have first hand expirence with this, last week i made a new Athlon XP3800+ X2 with this HSF. I reccomend the use of a metal backplate, the size and the weight of this cooler in my opinion requires it...(you can get one from thermaltake for 3 bucks) maybe others will disagree though. The...
- Ejhocky313
- Post #2
- Oct 18, 2005
- Forum: Cases & Cooling
E
ASRock 939Dual-SATA2 - Socket 939 with PCI-E and real AGP and Socket AM2 upgrade path

Im using the big typhoon and it fits great....no promblems at all... just make sure u get a backplate(can be purchased from thermaltake)
- Ejhocky313
- Post #378
- Oct 14, 2005
- Forum: Motherboards
E
Upgrading comp, will windows still work right?

Welp, it's Official I activated without any promblems...got it going last night, all is well, thank you for all the help!
- Ejhocky313
- Post #10
- Oct 13, 2005
- Forum: Operating Systems
E
ASRock 939Dual-SATA2 - Socket 939 with PCI-E and real AGP and Socket AM2 upgrade path

Follow up to an earlier post I made about this board... go it going last night with my Athlon 3800+ x2...no promblems at all with setup computer fired right up(first time i have ver got it going on the first attempt) I did however run into a snag while trying to get windows installed I got an...
- Ejhocky313
- Post #371
- Oct 13, 2005
- Forum: Motherboards
E
Upgrading comp, will windows still work right?

Even if it is indeed a OEM copy?
- Ejhocky313
- Post #9
- Oct 12, 2005
- Forum: Operating Systems
E
Upgrading comp, will windows still work right?

You suppose its worth a try maybe? Don't u have 30 days to activate it or something?
- Ejhocky313
- Post #5
- Oct 11, 2005
- Forum: Operating Systems
E
Upgrading comp, will windows still work right?

I believe it is oem...I bought it with a cable...
- Ejhocky313
- Post #3
- Oct 11, 2005
- Forum: Operating Systems
E
Upgrading comp, will windows still work right?

Hello This upcoming weekend I plan on upgrading the computer from an athlon XP system to a new Athlon 64 dual core, I am going to reformat and re-install windows XP Professional. My question is before I even starty this process will I be able to use the same windows (aka-same key)? I will...
- Ejhocky313
- Thread
- Oct 11, 2005
- Replies: 9
- Forum: Operating Systems
E
Thermaltake Big Typhoon with ASRock 939Dual-SATA2

I contacted Thermaltake, and they told me to contact thier parts department for the part that I need...so hopefully all is well...
- Ejhocky313
- Post #6
- Oct 7, 2005
- Forum: CPUs and Overclocking
E
Thermaltake Big Typhoon with ASRock 939Dual-SATA2

I was only going to follow the directions as per the thermaltake web page... but being that I am work, when I get home I will look at the motherboard.
- Ejhocky313
- Post #3
- Oct 6, 2005
- Forum: CPUs and Overclocking
E
Thermaltake Big Typhoon with ASRock 939Dual-SATA2

Does anyone know if the Big typhoon HSF will fit the ASRock 939Dual-SATA2? I read some places that some coolers out there require some back plate or something...I already have the motherboard, and the cooler is en route. If indeed I do need a back plate, where can i get one at? Thank in advance
- Ejhocky313
- Thread
- Oct 6, 2005
- Replies: 8
- Forum: CPUs and Overclocking
E
ASRock 939Dual-SATA2 - Socket 939 with PCI-E and real AGP and Socket AM2 upgrade path

Hey all! I just got this board after extensive reading on here, thinking about matching it with an athlon 3800+ X2, as far as the motherboard setup, has anyone used a(n) Thermaltake Big Typhoon cooler on this bad boy? everything fit? if not, what cooler did you use, Thanks!
- Ejhocky313
- Post #360
- Oct 3, 2005
- Forum: Motherboards
E
New Athlon x2

So if the HSF that comes stock will work fine, but there have been cases of the CPU beeing fused to it, for lack of better term, what's a good HSF to get, maybe around 50 or so bucks? Im still used to Socket A...I need to get with it! Thanks
- Ejhocky313
- Post #6
- Sep 28, 2005
- Forum: CPUs and Overclocking
E
New Athlon x2

Hi All! New to the forums, so far love all the information on this fine site! anyways to my topic, I am upgrading from a(n) Athlon 2800+ XP to a 3800+ x2 in the next week or so and I have a question. The retail box comes with a HSF, I always took off that pink "bubble gum" they put on the...
- Ejhocky313
- Thread
- Sep 28, 2005
- Replies: 12
- Forum: CPUs and Overclocking

RESOURCES

Top Bottom