Search results

  1. S

    Blurry text on video upgrade

    Yes. The only thing that has changed since upgrading is that I now have to use the adapter. Previously, I had a VGA port on the back of my old video card.
  2. S

    Blurry text on video upgrade

    Hello, I just recently upgraded my video card from an X800 to a 9600GSO. Everything seemed to work fine, except that I am noticing that images and text are "blurred" considerably at the same resolution. I am using a VGA to DVI adapter, though I am not sure that would have any effect...
  3. S

    WRT300N setup

    Hello, I am currently configuring a wrt300n router for use with wired and wireless connections -I would like the router to provide DHCP to all wired workstations on the network. The network will have shared resources and will serve as an intranet -Wireless connections should only be...
  4. S

    ntoskrnl.exe problems on bootup

    Well i'm trying to install a new hard drive into my computer simply as a storage device rather than bootable (it is sata). Anyway, when I try to boot the computer with the drive installed, I get the error about ntoskrnl.exe being corrupt or missing. However, when I disconnect the drive...
  5. S

    Motherboard for E2180?

    Hey guys, i'm looking at buying an E2180 for a new build im planning. I'm looking to hit around 3.0-3.2 Ghz from one of these chips but i'm stuck on what motherboard to get. Which motherboard could accomplish this easily? So far i've heard that an Abit IP35-E is a good choice. Is this...
  6. S

    New CPU advice...E2180?

    I'm considering upgrading from my current processor (Opteron 144) to an intel dual core. Currently, I'm pretty confused on what model processor to get. Keep in mind i'm going to overclock the heck out of it (looking for around 3.0-3.2) From what I've read, an E2180 seems like a good choice...
  7. S

    Where can I get a decent 939 PCI-e mobo?

    You may want to take a look at the EPOX 9NPA+ Ultra Pretty decent overclocker, and should hit 250 FSB pretty easily
  8. S

    Ventrilo server hosting?

    Well, there's always Teamspeak... http://www.goteamspeak.com/ Really easy to set up
  9. S

    RAID 0 troubles

    Yes, my raid controller does allow an array to be bootable or not, i've already tried that. I have it selected as not bootable, but rebooting the computer changes it to bootable for some unknown reason. As for the link to my motherboard manual: Epox 9NPA+ Ultra Thanks for all your help...
  10. S

    RAID 0 troubles

    INT13? I couldn't find anything even related to that in my BIOS. Any ideas on where to find it? And my boot drive is IDE Thanks EDIT: My BIOS is phoenix awardbios if that makes a difference To the poster below: Thanks for pointing that out, I understand now and am trying to use a...
  11. S

    RAID 0 troubles

    Yes, i've checked the RAID boot settings There isn't really known issues concerning my motherboard and RAID Yes, My BIOS is the latest revision
  12. S

    RAID 0 troubles

    Thanks for the reply, JBOD fails as well with the same error. What's weird is that the boot priority shows the array as last. Basically it is the same boot order with the addition of the array at the bottom My thoughts are that as the array is added, the hard drive names (/dev/hda...
  13. S

    RAID 0 troubles

    First off, let me state that I am dual booting Windows XP and Linux (with GRUB) Well, currently I'm trying to create a RAID 0 (striping) array on two 160gb SATA drives merely for storage (not booting) on ports 3 and 4. The problem I'm having is that the computer tries to boot from the RAID...
  14. S

    Setting up Raid...which is best?

    Hi, I just recently purchaced two 160GB SATA drives that I would like to use as storage on my computer by using a raid array on both. Which raid "mode" do you think is best for this situation? Thanks
  15. S

    Come out of hibernation within xx minutes??

    As the title suggests, I would like my computer to come out of hibernation (or standby) within a set amount of time Is there a way to do this?? Thanks
  16. S

    Good Server Distro

    I'm planning on setting up a small server at home for personal use, but i'm having trouble deciding the distro to use... What distro do you guys recommend for a server?? What are your thoughts on Gentoo? Thanks for your time
  17. S

    ATI CCC problems...

    Well, I just installed the Catalyst Control Center from the Dhzer0point drivers. The CCC was not installed previously The problem that I am having is that it will not launch. I double click, and nothing happens. I can see CLI.exe in the task manager though. Sometimes when I double click...
  18. S

    Slow boot up time

    All right I'll try that Boyo, thanks everybody!!
  19. S

    Slow boot up time

    Hi guys First off let me say that i've been having a slow boot up problem pretty much ever since I built my own computer. Windows loads almost perfectly normal and hangs just before all the icons, taskbar, start menu or anything loads (I have autologin enabled), so the only thing I can see...
  20. S

    Quick Question

    Hey guys, Since my router has a limited number of open slots for port forwarding, would it be safe just to port forward all ports 1-60000 to overcome this issue? Also, if I did do this, would the ports be open all the time or only open when an application requests to communicate through...
  21. S

    MS Visual C++ (.NET) vs C++

    All right guys, thank you so much for the replies. I now see why it's better to start out on C++ rather than C# or .NET. Now that I've decided which language to start on, now I've got the task of learning it. I was thinking of some books. Any recommendations? Thanks!!
  22. S

    MS Visual C++ (.NET) vs C++

    Sorry guys, but im a programming n00b so bear with me... I know that my starting language should be C oriented, but i'm not sure which one Why wouldn't I want to start out in Visual c++ 2005 if it has extra functionality just added on? I've never heard of C# before. Whats C# have that...
  23. S

    MS Visual C++ (.NET) vs C++

    A few quick questions: Do you guys know the difference between Visual C++ (.NET) and just regular C++? What about Microsoft Visual Studio .net as well? Also, which one do you think would be better to learn? Thanks!!
  24. S

    2 Routers. One wired and another wired/wireless

    Basically, I have two routers. One that is wired and one that is wired and has wireless capabilities. The main router (wired) is the one connected to the internet. So, the other router is connected to the main router with an ethernet cable. Confused yet?? The main router assigns a subnet of...
  25. S

    24" Widescreen CRT (FW900) From Ebay arrived,Comments.

    Thanks, that clears up a few things but theres still a couple of things at the back of my head I currently have a 17" CRT and game at resolutions of 1024x768. Since this is a 24" widescreen monitor, will I have to up the resolution to get the same effect that I had on my 17" monitor?, or will...
  26. S

    24" Widescreen CRT (FW900) From Ebay arrived,Comments.

    Could you still game at 1024x768? My video card isn't all that great and probably can't handle resolutions like those What do you think? Thanks!!!
  27. S

    Best CRT

    What about the dell p1130?
  28. S

    Dual/Triple Monitors

    Well, I was considering trying out dual/triple monitors. I know that a lot of people would say to get three instead of two. If that is the case, then I would need a new PCI video card (My current video card supports 2 monitors) 1. What would be the best PCI video card for the job? I...
  29. S

    VB or Java?

    All right guys, thanks for the replys!! I was also considering Java over VB. But... Would learning java be easier if I did know some VB? Thanks
  30. S

    VB or Java?

    Right now I know nothing about programming languages, and would like to learn more in this area to help develop my computer programming skills for a possible career, or just for the experience. A conference I'm considering attending will have a 1-day workshop on Visual Basic. How useful would...
  31. S

    Zalman vf700Cu

    Thanks for the reply, but where can I find isopropyl alcohol?
  32. S

    Zalman vf700Cu

    Hey guys I was thinking about buying a vf700Cu for my current video card, but before I go through the installation process I would like to get a heads up on a few things. 1. What can I use to take off the thermal paste on the gpu (from the stock cooler) 2. Can the zalman plug in directly...
  33. S

    Safe to abort drive-cloning?

    Well, right now I'm cloning a 120gb hard drive to a 160gb hard drive. For my own, personal reasons I have to abort the process by turning off the computer and rebooting from the 120gb hard drive (the drive that is being cloned). Is this safe? What could happen? Thanks!!
  34. S

    Problems with Debian installation

    anyone?
  35. S

    Problems with Debian installation

    Right now, I'm trying to use 2 DVDs to install Debian (3.1_r1 "stable") to my computer. The only thing going wrong with the installation is that Debian Installer cannot auto-detect my network controller, which is the NVIDIA nForce Network Controller. I tried individually selecting forcedeth...
  36. S

    PartitionMagic: "Partition Type: BAD"

    I have two ext3 partitions and a swap partition.
  37. S

    PartitionMagic: "Partition Type: BAD"

    Well, I just installed my second distro of linux onto my secondary hard disk (Ubuntu and Kubuntu), which also has a primary NTFS partition on it also. Everything went fine, but I wanted to resize my partitions to redistribute and manage free space a bit better. Unfortunately, when I fired...
  38. S

    Kubuntu or Mandriva?

    Hey guys, I was just wondering what you guys thought about kubuntu and mandriva. Which one do you recommend for the KDE desktop? Also, what do you guys think of Debian? Thanks
  39. S

    Ubuntu: X server will not start!!

    Thanks for the reply Sureshot. I tried the nano /etc/X11/xorg.conf and I could read the file, however when trying to save the modified file I get "Error writing to xorg.conf: Permission Denied" Do I need to become root to do this? Because I was using a regular user to read the xorg.conf...
  40. S

    Ubuntu: X server will not start!!

    Hi all, I am a complete and total linux noob, so I decided to try out Ubuntu. The installation went great, but when starting up Ubuntu I get an error about the X server not being able to start. It then immediately goes to a textual environment. So now, Im stuck. I don't know what to do...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |