Kaido, new question to see if you've run into this problem.
My red top i3 nuc (last gen) seems to be having some stability issues. it will randomly crash and enter into bootloops.
I have 8.1 install with all the updates. Just curious if you know what it could be. If not, ill start with the...
Kaido,
Appreciate the link. I don't think however that that monitor fits the bill. The beauty of that Gechic On-Lap monitor was that it used the USB to power to the display electrically, but used HDMI for the display. Why that is useful is because then you can watch videos on it instead of...
On one hand, I do very much agree, but I think its going to be one of those setups where you have the posibility of moving, but normally don't which makes the usb monitor + nuc arrangement attractive.
Anywho, if anyone knows anything like the GeChic but newer and better, i'd be much appreciative
Mr Kaido the guru.
I got my thunderbolt edition i3 ivy bridge nuc and stuck in the internals i had laying around. Safe to say, plugged it into my receiver and have a new streaming machine + backup server. Wanted to thank you for that.
New question. I know theres monitors out there like the...
Saw that deal as well and snagged it up. I made a post a month back asking Kaido about his experiences and finally got around to placing the order. $180 net cost to me seemed worthy of an experiment considering I had the parts laying around. Will report back with how this works out.
Kaido,
I've been following this thread for the better part of a 6 months now and wanted to thank you for bringing this product to the attention of masses. Being said, whats your opinion of the IVB i5 one vs the new Haswell ones?
Only reason why I ask is I have a spare 80gb msata intel...
Just wanted to chime in that the Glass Pro panel looks to be the exact same monitor as the Microcenter Auria 27" IPS panel save a difference in the stand. As an owner of one of the Microcenter Auria's I think its quite the good bang for the buck. No problem with the backlight and the guy on cnet...
Just wanted to post my experience with these "a-" ips panels.
I pickedup one of the microcenter ones about a week ago and couldn't be more pleased. Its pixel perfect and has no backlight problems (although i had to bin 2 before i found one) and comes with the warranty as well which is nice...
I see, so in that case, what else is good, given the above is sold out. I want to keep the card in the case preferably, so as to be able to transport the case easier.
I'm currently trying to minimize the wiring in my house and just got a E3200 router not too long ago with 300mbps connection speeds. I was wondering what kind of wireless card works best for internal use in my computer and if someone had any good recommendations?
Thanks in advanced!
Is the 650 as bad as they say?
I was thinking of cutting the honeycomb grill, and putting some AP-15's or Cougars on my H100 for venting if that would help
Hey guys. I've been running a CM 690 II Advanced for a while and love it. But the Push Pull setup with my H100 is pretty tight.
I was wondering what case I could get thats a Mid Tower, With a window and is relatively good on the cooling and silent factors.
I like something clean looking like...
Hi guys, I currently am running a rig that has been operational since day 1 of sandy bridge release back in jan of this year. been running a mid oc 24/7 almost at 4.3ghz. A few days ago, I started to get a glitch and I first suspected it being uneven current from my wall as my sound and...
Quick question for the guys here at memory and storage.
Whats the consensus on the mSata SSD market in terms of which is the go to drive.
I have a G2 intel for my desktop and I love their reliability and decent speeds so I was leaning towards the 310 80gb edition. I've seen a lot of talk...
yea. But at 13.3 its a lot easier to deal with/more acceptable to have a lower res display in my opinion and also the IPS panel would be enough benefit for me to get over the low resolution. Having used an Old Vaio SZ series at 13.3 and having that resolution, it was ok because while i had less...
This has probably been the better of the responses I've received. I'm going to be looking into detailing my endeavor in replacing the screen.
On the other hand, I just saw the announcement of the LG P330 and If that arrives before Mid Sept, I'm totally jumping on that instead.
You're talking about desktop monitors. I'm specifically referencing my laptop screens of the same dimensions just different resolutions
Essentially what I'm asking is can I replace 1 14" panel with another thats the same size.
you're talking about the GPU right? I know that they are soldered onto the motherboards and are unreplaceable. But I'm failing to see how any changes in the videocard either dedicated or integrated would affect compatibility with any given lcd screen. The video card drivers should take care of...
Because these stupid firms keep offering lowass resolutions for everything under 17". Not to beat a dead horse but 13x7 is just not enough screen space. I barely have enough room with the 14x9 I use on my lattitude.
could you elaborate a little bit more on what you mean by replacing the...
I recently finished replaced the LCD screen on my e6400 latitude with a manufacturer replacement and this got me thinking.
Alot of the new 14" and 14.1" laptops coming out are at a lower resolution than mine (I have the 1440x900 widescreen LED). Furthermore, my desktop uses a 1920x1200 screen...
oh, I misunderstood the question the first time. I asked a similar one a few weeks ago in the storage/memory one. But I think you can use something like acronis to do it.
You might want to seek more clarification on that since my Raid array was simply for Apps before and not the boot drive to...
Just moved my raid with no issues from 1 p8p67 pro to another Rev3.0 board. same make.
I too have an SSD as boot drive and have the intel controller set under Raid. it works fine
I currently own a Dell U2311h which I have picked up a few months ago and the rig in my signature. I think this monitor is the best I've used and currently don't have room for a eyefinity monitor setup but would love to have one in the future at some point.
My question is this. I have grown to...
My OS is on my SSD so thats not a problem.
Based on my understanding of what you just said, the programs will all still run after a simple directory change for shortcuts correct? I'm most concerned about this because my ISP is terrible and I would hate to have to re-download DAII, WoW and what not
Just a quick question. As you can see in my sig, there is a Raid 0 array of WD scorpio Black's that I use primarily for loading games onto.
Because of the rev 3.0 boards coming out, I'm thinking about putting those drives back in my external and laptop and so I want to clone that raid 0 array...
Does anyone know about the status of this particular model?
I'm very interested particularly bcause of screen res and gpu when compared to the sv model.
i have a p8p67 pro and i dont have an issue with my Rip Jaws
the issue lies with the case. What you have to do is slightly mount the fan higher which may come in contact with your case. On a side note, my fan is only elevated to about the top of the pipes in the fins so its not a problem.
way to necro a thread guys haha
I ended up doing the i5 750 last year and ended up handing it off to family as I stopped having usage with work.
I did however build a i7 2600k 2 weeks ago and it has been flawless
My p8p67 Pro and sandy bridge rig has been pretty nice to me so far, no major upsets.
only thing that ive noticed is that in cpu-z as well as ASUS monitor, it shows the max bandwith of my memory modules to be pc-10700?
the model number shows as 12800 in the serial as seen below and I have...
Can anyone comment on Raid support for p8p67 boards from Asus?
it says they are intel rapid tech whatever supported but does that mean it supports raid 0?
i plan on raiding 2 drives together that i have laying around for applications
SmCaudata, just curious, what would you use 2 ethernet ports for?
I have never had this option on any of my rigs so I'm not very well informed on this matter. Is it possibly that you could use your computer kind of as a router and share a connection with another computer/system/server of some...
So is what you're saying basically that right now theres no way to get around the issue?
are there tests showing how much degrdation there is in terms of speed for Sata 3 and USB 3.0 when x-firing or SLI?
also what board would you reccomend then?
I hope one of you guys can help me with this question i have. I have almost all the parts for my new SB rig. I am planning on finishing my rig to consist of i7-2600k, intel x-25m 120 gig, 2 320 gigs I have laying around in raid 0 for lesser used games, XFX 6950 modded to 6970, OCZ ModstreamX 700...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.