Search results

  1. T

    Half way to a $1500 Build, need help with picking the rest of the parts.

    I already bought the PSU so can't change that now, any wrong with the SeaSonix X650? I have a Logitech G15 keyboard on my current computer that i'm going to switch with whatever cheap keyboard i'm end up buying. I might even skip it and use the 15 years old IBM keyboard from my first computer...
  2. T

    Half way to a $1500 Build, need help with picking the rest of the parts.

    I had thought about building a new computer but not this weekend so I haven't done a lot of research. I saw a BF deals for the Dell U2412M, i5 2500K and Asus P8Z68-V PRO/GEN3 and grabbed it. Plus I bought a SeaSonic x650 PSU on sale a couple of month ago. So sundenly I had spend $750 of my...
  3. T

    Just upgrade CPU, MB and RAM, having some problem.

    Not sure where to put this so here's goes. I had AMD 3500, 2gb ram DDR1. 2 hard drives. One of them has XP SP32bit, the other drive has 3 partitions and in one of that partition Win Vista Ultimate 64 bit. I upgraded today, with a new PSU, Intel E8400, Corsair XMS2 4GB DDR2, and Gigabyte...
  4. T

    Where can I get some Goof Off and Isopropyl alcohol

    Thanks letting me know where to get Goof Off. I realized why I didn't find it on the Home Depot website before, it's in-store only and I have to go to that section of the site. Also thanks for the cleaning advices. I might also get a custom cooler for the GT8800 soon, so these advices will be...
  5. T

    Where can I get some Goof Off and Isopropyl alcohol

    Where can I get some Goof Off (or any xylene based cleaner) and isopropyl alcohol? I just ordered an E8400 and come Acticsilver Ceramique with it. I need to clean the thermal grease/pad off the heat sink and heard these will do the job but have no idea where to get it. I found it on Amazon...
  6. T

    Does my 720p HDTV really do 1080p?

    It's doing 1080i. 1080/2=540 lines.
  7. T

    When is the next gen DX10 cards are going to come out?

    In a month or two? I thought it was further off like 6-8 months. Thanks.
  8. T

    When is the next gen DX10 cards are going to come out?

    When is the next gen card is due to arrive for Nvidia and AMD? I'm planning for a new system after the second tier card for the next gen of DX10 card to come out. What time frame would this be? One year to one and a half year?
  9. T

    Just Bought first X2

    I was about to create a new thread but since the OP is doing what I'm thinking of doing, I'm just going to post here with some question. I built my 3500+ system with a 7600gt and 2 gig of ram a year and a half ago. I'm thinking of buy either a X2 4200 or Opteron 165. Hopefully with this...
  10. T

    Need help, DSL disconnecting frequently

    I have two for the two other phone in the house. About 4k something feet when the Qwest tech was here and he checked it with his tool. The Qwest tech checked the line at both the box on the side of the house and where I connected the modem. He said both were fine. Oh, the modem is...
  11. T

    Need help, DSL disconnecting frequently

    I have a problem with my DSL connection. It frequently disconnect and reconnect immediately. Has been happening for about 3 months now. As a result I can't play online games and any other use of the internet become very frustratingly annoying. I've called Qwest tech support, all they do...
  12. T

    Trying to put together a system in a hurry

    I finally have some time to do some testing. Reading you guys' suggestions I turned off all auto setting regarding the ram in BIOS and set everything to the advertised spec manually. It got less error about 1 every 2-3 pass and I've seen it go up to 5 pass without error. I still couldn't...
  13. T

    Trying to put together a system in a hurry

    anyone here have any suggestion? bump up voltage? lower voltage?
  14. T

    dual boot screen at start up

    Thanks, it fixed it.
  15. T

    Trying to put together a system in a hurry

    I made a few change to the part list including getting a bigger monitor, XP pro and the ram bobsmith1492 suggested above. The part arrived Friday and I put it together Friday night and Saturday. Man it was stressfull, I ran into all sort of problems but managed solved most of them...
  16. T

    dual boot screen at start up

    Tried to access the phantom boot, it just say that the system files can't be found or corrupted.
  17. T

    dual boot screen at start up

    I'm building a new computer. I mistakenly installed winxp in partition D. So I install winxp again without formating partition D. After winxp reboot it show the dual boot screen and ask me which one I want to boot. I boot from drive C. After I got in I quick formatted partition D, but now I...
  18. T

    Building computer, doens't detect DVD drive.

    Last year I build my computer, when I started up it dectected both DVD drive and SATA drive as it should be. As IDE and SATA drive. I then proceed to install WinXP just fine. This year I'm building a computer for my brother and things is a bit more difficult. It doens't detect the DVD drive...
  19. T

    Need help with CPU/heatsink installation real quick

    I'm installing an Intel E6400 stock heatsink and pushed 3 or two pin in but didn't managed to get the other 1/2 pin in. I ended up removing the heatsink totally and redo it. The thermal paste that came neatly with the heatsink has been smeared all over the cpu. I succesfully installed the...
  20. T

    Trying to put together a system in a hurry

    Thanks guys, I'm going to order this now. About the OS. It would be nice to have XP Pro but I can't think of any feature that's necessary and thought it would be a good place to shave $50. WinXP Home does support 2 core right?
  21. T

    Trying to put together a system in a hurry

    bump Should I get a different MB? I can't find much about the ABit AB9 and what I find aren't very kind. Choosing the MB always seem the hardest to me because it affect so much in term to features, setup and ease of installation.
  22. T

    Trying to put together a system in a hurry

    My little brother want a new computer system to play the lastest games. He's 17 and a fairly creative guy and is interested in animation and computer graphic. He got a summer job and has about $1500 for it. He has been asking me to put one together for about a month now but I've kept delaying...
  23. T

    What home theatre setup will sound better? Best Bang for the buck

    The link you provided has it at $ 129.98
  24. T

    Slow file sharing between computer.

    I forgot to mention that when browsing the old computer from my new one, the window crash all the time.
  25. T

    Slow file sharing between computer.

    I got a new computer and I want to transfer file from the old one to the new one. The old one doens't have a network card so it's connected to the router using a USB port (the router have only one cat5 slot anyway). Theoratically, USB 1.0 have a max speed of 12 Mbs, and the router status...
  26. T

    Cool n Quite not working

    hehe, I reseted my comupter and checked every BIOS setting but forgot to check the power option. thanks for the help guys. I checked the control panel /power option. I think the Window update did something to it. I had it on "minimal power managent", but I just checked and it has switched...
  27. T

    Cool n Quite not working

    When I first got my AMD 3500+, cool and quiet didn't work but after in update the BIOS and installed some AMD driver it worked. Now a few months later I notice that CnQ is not working again. I haven't change the BIOS or any BIOs setting that i'm aware of that would cause this. I don't know...
  28. T

    DVI cable.

    I'm buying an LCD monitor for the first time. It doesn't come with a DVI cable so I think I need to buy one. My question is when it come to DVI cable, do you get what you pay for or any cheap $10 cable will do?
  29. T

    Cool n Quite not working

    Just tried it. Followed every steps, didn't do anything. There's no Cool n' Quiet driver/software for WinXP right? Just the CPU driver that include CnQ? I just want to make sure that I'm not missing anything. At the AMD support site there seem to be CnQ driver for Linux and WinME/2000 but...
  30. T

    Cool n Quite not working

    Anyone have any idea how to fix this? It's a real hassle having to turn the clock down in BIOS each time I want to leave the computer on overnight.
  31. T

    Cool n Quite not working

    Epox 9pna+ Ultra
  32. T

    Cool n Quite not working

    Just checked. Sitting there for a while with 0 CPU usage, CPU running at 2210.3 MHZ, 11x multipler, 1.42v. I'm not overclocking.
  33. T

    Cool n Quite not working

    I have an AMD A64 3500+ (Venice one of the new CG stepping I believe) and cool n quite seem not to work. I looked up an installation guide on the AMD website and did everything it said but it's still not working. I had Cool N Quite set on Auto in the BIOS, installed the latest AMD CPU driver...
  34. T

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    I just check the AMD website and it seem my A64 3500+ (ADA3500CGBOX) are suppose to run at 1.35V but in the Bios it's running around 1.5V. Is it ok to run it this way and is it causing any damge?
  35. T

    Finished my first build

    Thanks Somniferum. I think I'll locate all the up to date drivers and put it on a custume WinXP install disk and reinstall WinXP. Should I move the sound card from my old comp which is a Phillips PSC706 (about 3-4 years old) or is the on board sound better? Plus, my DSL modem is also a...
  36. T

    Finished my first build

    BTW, how do I set up a network (or someway) to transfer files from my old computer to the new one. The window network setup wizard is no help so far.
  37. T

    Finished my first build

    Well I finished my first build last night at around 12 am. It took me about 6 hours. There were a few very stressfull moments. One side of the of the heatsink clip wouldn't snap on. I had to push real hard and I could see the board bending. I though I was going to crack the board. Plus I...
  38. T

    EPoX "EP-9NPA+Ultra" NVIDIA nForce4 ULTRA Chipset Motherboard

    Hey guys, I got the board and installed it and it's working OK so far (knock on wood). Window is formating the drive right now. One question though, the mb came with little blue heat sink in a bag. What is it for and where do I put it? Is it important? I don't think I came accross anything...
  39. T

    Need help installing drive

    Nevermind, I figured it out.
  40. T

    Need help installing drive

    I'm building a new comp and one of the first thing I'm doing is installing the DVD RW drive and I'm stuck. It's a Cooler Master Centurion 5 with tooless drive installation. I don't know how far in the drive are suppose to go and how to lock it. Here's the link to the Centurion 5 with online...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |