Thank you for all your responses.
I'm looking for something more integrated into the website itself.
The only example that I could find of something similar to what I'm looking for (in presentation, not content, we'll be using it at our college for educational purposes)...
Good day!
Let me explain what I need.
I have a folder, with about 30 subfolders, each of which contains hundreds of files.
What I want is to have a way (using either static HTML or PHP, I don't care as long as it's automated) to create a catalog of these files, with a download link.
I...
So which one do you think is the best for the first level of virtualization?
I have experience with VMWare Workstation, but none with Microsoft's Hyper-V.
Another solution would be to have VMWare Workstation on the physical PC be binded only to one of my 2 ethernet interfaces (each with one ISP).
I know that's easy to do, but can I also have a host only network access, so that from another computer on my network I would be able to access to the...
Thank you.
Last question, I've no experience with ESXi. It does not support installing software, correct? I'd like to install open VPN on it, so that all Internet traffic goes through a VPN. If I can't do that, I'll need to nest under a nested VMWare Workstation using Windows 8, which will have...
Thanks for the response.
So, have you tested under VMWare Workstation?
I don't see it listed here: http://en.wikipedia.org/wiki/Rapid_Virtualization_Indexing#Support_in_software
Thanks again!
Hi guys,
For my lab, I need to be able to nest virtual machines. That is, run several virtual machines inside one virtual machine.
If I install Windows 8 and then VMWare 9, I believe I won't be able to assign properly the resources to the nested virtual machines, that would run all under...
SOLUTION:
Hi guys, thanks for all the responses!
Someone at another forum proposed this, which works great!
""OK so the situation is:
Mailbox called Tom. Two other users called Dick and Harry. Mail sent to Tom should be forwarded to Dick and Harry?
Setup a distribution list called...
The thing is that I cannot (I believe) have a distribution list AND also have the same name as an email address. He needs to receive all email sent to joe@company.com, and so do 3 other people.
Hi guys, thanks for the responses.
Seepy, you say I should configure a rule that forward mail in Outlook? The rule will then be processed by exchange directly, right? Without needed Outlook to be open?
Hi all,
I have a problem, a client had a setup with another mailserver (Mdaemon), that allowed him to do that.
Anyone knows how to do the same in Exchange? I thought about distribution lists, but I don't think it will work to have a dist. list called joe@example.com, with the members joe...
OK, so I've been using this oldie PC for 5 years now, with XP.
I decided to try Ubuntu on it, didn't serve my purpose, so I went to install XP SP3.
After eliminating the partitions and formating a big one, the installation copied files and showed the usual "will reboot in 10 secs".
It does...
Hi all,
I'm in a pretty messed-up situation, hope you can give me a hand.
I deleted by accident a folder containing a VMware server virtual machine, that contains most critical information. The host OS is CentOS 5.5, which I believe by default uses Ext3.
I shut down the PC intermediately...
Hi all,
I'm in a pretty messed-up situation, hope you can give me a hand.
I deleted by accident a folder containing a VMware server virtual machine, that contains most critical information. The host OS is CentOS 5.5, which I believe by default uses Ext3.
I shut down the PC intermediately...
Hi all,
I'm in a pretty messed-up situation, hope you can give me a hand.
I deleted by accident a folder containing a VMware server virtual machine, that contains most critical information. The host OS is CentOS 5.5, which I believe by default uses Ext3.
I shut down the PC intermediately...
I was asked this on a test for the CEH. What would you answer? My own answer is at the bottom.
What defensive measures will you take to protect your network from password brute-force attacks? (Choose all that apply.)
A) Never leave a default password.
B) Never use a password that can be...
Hi guys,
Could someone post a thorough list of materials to study, to successfully pass this test?
All I can find is for the old version, it seems. It doesn't have all the new info for the new exam.
Hi spidey, thanks for the reply.
Basically, we have 2 WAN links, both should be used for regular Internet access and the traffic should be loadbalanced taking into account the different bandwidths.
We need failover, so that in case one link is down, everthing goes out though the other one.
Hi guys, I need to set up load balancing for an implementation. We have 2 WAN links, one 10 MBs, the other 2.
Can anyone link to a site where I can find information on how to implement a Dual WAN failover configuration?
CISCO AIR-AP1242AG: how to WLAN Hi all, thanks for taking the time to look at this question.
I need to install this model of AP on a network. Actually, 6 of them. The problem is that I need to provide service for 2 types of users: one of them, needs to access only to the Internet. The other...
Hi guys, I need that, let me show you, it will be easier to undertand.
A 1
A 2
A 3 6
B 2
B 5 7
C 1
C 1
C 5
C 3 10
So, basically, I have A LOT of different names in the columns with the letters.
I need Excel to look at column A and sum the values...
Hi guys,
I need to measure the signal rate in different parts of a building. I know that it can be done with SBSettings, but I don't want to jailbreak my phone.
Can this configuration (getting the signal strength in numbers instead of the lines) be done without jailbreaking?
Hi guys.
I have a Dell bluetooth stereo headset with mic incorporated.
I want to use this to have conversations with my iPod touch, using voip software.
Can this be done? I'm asking because when I pair the headset with my iPod, the new voice notes app says I don't have any mic.
In case...
Hi guys, I have the model stated in the subject.
I had the 2.x firmware. I restored to factory defaults.
After that, it hanged again.
Later, I updated to firmware 3.0.
And it just hanged a few minutes ago.
I never had an ipod before. But this is NOT normal behaviour right?
With "hanged"...
I tried adding a rule that allowed connections from Internal to http://*.eset.com for all users, but still doesn't work.
It recognizes the connection as the rule above but the connection says that it failed. The username is always anonymous.
I added that rule on top of all the others that...
Good morning guys.
I can't update the NOD 32 AV definitions at my company.
The problem is that, even though the proxy is configured properly at the Nod32 propierties, NOD send the request without being authenticated.
You can see it here at this logs:
192.168.1.5 8080 http Denied...
Hey guys, I created a rule allowing traffic from internet to external, for the protocol denied and on all ports... the problem was that I DID create that rule, but the port was a different number.
Piece of cake (after solving it, LOL :d )
Please check the following screenshot of Isa's log:
http://img219.imagevenue.com/i...untitled_122_260lo.JPG
"Acceso full a external" is the rule "Full access to external", in spanish.
At the bottom, you see the IP ending in .198 which is the one that gets the blocked connections.
Note...
Good morning guys!
We have this problem at work; we connect to a Citrix Metaframe Presentation Server which servers the Terminal Services application.
When we click on it, it opens a .ICA file and trys to establish a connection to the remote server.
With ISA server in the middle, it fails...
The question is which soft is good for this.
GFI Webmonitor looks good on the outside, but the reports it generates do not include the most important for me: which sites a given user of Active Directory visits on a given day (much better if it includes the time they visited them).
Is there a way to generate a report to know which sites an specific user entered in a given day or series of days?
This is in my opinion the single MOST important report of them all & I can't find it anywhere!
Yeah, it created the database and all was fine :D
The weird thing is that I clicked on "update reporting data now" a lot of times and nothing hapenned... but now it's ok!
Anyone knows if there's an add-on to get new reports?
We are trying to setup this configuration and we've encountered with some problems.
I'm trying with a SQL 2005 server we are running for other purposes. The database was named GFI_WM and I didn't create the tables; I didn't find any info on how to create them. Are they created automatically...
The problem was that there was a rule in ISA server that routed the traffic coming from VPN clients under an specific group name.
Thanks for the ideas guys!
RebateMonger: nope, doesn't work that way either. That's only with some users, other can access OK. Some to all, some to some resources.
The IPCONFIG /ALL is the same except the client's IP ADDRESS.
netsysadmin: running AD on the LAN side; the clients connect from nearly anywhere. No WINS...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.