Hey thanks for info.
How did you deal with the NB heat. I am going to try using silicone to attach a small fan to the top of the stock NB heatsink. I have read that a few people have tried that with success. They put a dab of silicone at each corner of the fan an push it on to the heat sink...
Thanks for that help. As you can tell by the way I worded this I am a little new but am trying to get better.
Currently I am running my E6400 on a GA-965P-S3 at 400x7 and all stock voltage except the Vcore which I reduced from 1.35 to 1.2625. I have all info about this in the other post I put up.
This seems to be working for me so if anyone has any questions please ask away.
GA-965P-S3(BIOS ver 8.0)
E6400
GSKill PC6400(800) RAM
Stock cooling on Cooler Master Centurion Case
(Added 1 80mm to side of case blowing into case)
Disabled all recommended items in C2D OC ver 1.1...
I was wondering is someone could help me with these 2 questions.
1.) If there was 2 ways to reach the same exact speed using the mult and FSB is one preferred over the other.
Example: I can OC my E6400 to 2.4 Ghz two ways -
(8X mult and 300 FSB) or (6X mult and 400 FSB)
Is one way...
Thank You - Great! has been downloaded and ready.
System as ordered
MOBO - GA-965P-S3
CPU - E6400
RAM - 2 Gig G SKILL PC 6400 1.8V - 2.0V
PSU - Corsair 520HX
GPU - eVGA 8800GTS
HDD - 2 WD 250 GIG SATA 7200 drives in RAID 1
Case - Cooler Master centurion 5CAC-T05-UW Black Aluminum...
I have seen that. Some say yes others say no. I called Gigabyte this morning and the tech guy says its is supported on one of the two SATA controllers and is limited to only 2 drives. On the other hand When I look at the Newegg specs it shows no RAID support for the S3 but there is support on...
Hi All
I just ordered this board and was looking to see if there was a good reference on how to configure the SATA Raid. Trying to get everything together so I can be ready.
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.