Search results

  1. C

    Question for AC Freezer 64 PRO Owners...

    The problem is the ambient temperature....in my case, 1C drop in ambient will relate to 1c drop in CPU temp, the relation is basically linear with very little or no exceptions. I'll probably get myself a tube of AS5 in the near future and give it a spin, but do keep in mind tho, many times ppl...
  2. C

    Help a nub pick a power supply

    Seasonic S12 430 gets my vote, not sure whether if Forton is superior, but it's a great PSU Out of the bunch, Forton is clear winner
  3. C

    DFI LANPARTY SLI vs Asus A8N32 SLI

    I think i'll just jump into this discussion. As an user of A8N32, i have no complains over this board. It is a sheer engineering perfection as compared to the DFI board. However, when it comes to chosing the board, here's my oppinion. OC: Most people will go DFI all the way. However, the...
  4. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    Official Day 3 result The temperature registerd was 26.2C, and the load temp is 48. Improved somewhat over the +23 ambient load temp. Powersupply goes away today, my seasonic will hopefully come a few days later
  5. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    =D I know, i even got a chuckle outta myself when takin that picture Anyway, into the third day, CPU temperature still remains ambient + 23 for load.
  6. C

    What is a memory divider

    Havn't used your board before, but my A8N32 doesn't like me running on manual speed mode, even though it is the same clock as what the board sets it on auto. Try that on DFI board, on my board the auto setting bumps my Kingston value ram to 213Mhz, which translates to 426Mhz. Not too bad for a...
  7. C

    Acoustipack Deluxe Mini Review

    Cant wait to get my acoustipack.... They said they sent it out on express mail, but from NZ to AUS will probably take a couple of days.... Also waiting for my Seasonic S12 500W!!! BLOODY OUT OF STOCK CRAP!
  8. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    EDIT: added to opening thread
  9. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    OK, after about 20hr of burning, no difference in result. Day1: Ambient = 24.5C Load = 48 Day2: Ambient = 24.6C Load = 48 More coming.... BTW, before I left the burning on, I played around with the bios and see how much can I underclock, I set my HTT back to 200, and with a 4X...
  10. C

    Asus Vento 7700

    Looks depends on oppinion, i personally cant stand the Lian Li cases, but Lexa looks great. My current favorite is the P180, good innovation with simple and sleek look.
  11. C

    Acoustipack Deluxe Mini Review

    Good stuff buddy! My AcoustiPack DLX should come next week, and then i'll update my thread with a pictorial log. P180 + AcoustiPack + Ninja + Fanless Mobo + Silent Fan should more or less equate to silence PSU arriving later next week too, Seasonic S12 500W, 600W is a bit of an overkill. My...
  12. C

    Asus Vento 7700

    OOOK, coming from an ex-owner of vento. This case looks SICK, if you want something that will send any bystander in awe yet not have the cliche UV/acrylic panel rig. Very well designed and userfriendly. Cable management should come with ANY modernday PC but is often overlooked, the knob on the...
  13. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    Not exactly....I found that Ninja's setup cools the board just like the XP120, and i personally find ninja easier to work with, but that's all dependant on personal taste This is a test bed, also because my AcoustiPack is being deliverd from New Zealand and my Seasonic PSU is not due till...
  14. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    EDIT: added to opening thread
  15. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    Jedi, you are right, at the same reading of ambient temp, 29.2C to be exact, the Ninja is EXACTLY 3C cooler than XP-120. 52c VS 55c
  16. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    Thanks for the critique as always Jedi! Besides SpeedFan, I also use the ASUS Probe software to monitor the temperature. Maybe you can direct me to another program if you think speedfan/ASUS Probe could be faulty. As of ambient Temp, i use a electronic thermometer that is built into a clock...
  17. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    Priming for another few hours, seeing if the temp on ninja will rise or will remain constant, looking forward to replies!
  18. C

    Pictorial P180 System Build Log + HS Benchmark + Opty OC Result + More...

    Hi all, just putting together my new rig, and thought there are findings that I think is better shared with everybody. This thread will include pictorial logs, benchmarks on coolers, findings regarding to various software/hardware features. Some you would have seen before, but some I have yet to...
  19. C

    P180 case build question?

    Just one thing I noted while using the lower drive bay, don't screw in all 4 screws tight!! First, have your drive sitting the right way up, use your finger to screw both screws in as far as possible. Now, Lift the drive up with your finger, and do another 2~3 rotation with your finger. Screw...
  20. C

    What's better at Overclocking?

    I also recommend 165, i got my Opty runnign at 2.56 @ stockvoltage, next will try 2.7 @ 1.4V and see how it turns out Well, i guess it does depend on the individaul chip, but an 165 will run 2.4GHZ (300*8) without much of an issue, given that you have a good main board I personally prefer...
  21. C

    MX-1 Thermal Paste Burn-in/Installation

    So I guess this is STRICTLY for CPU with naked cores. Thanks howard!
  22. C

    MX-1 Thermal Paste Burn-in/Installation

    Hey howard, why arnt we installing our grease like described on the Arctic website for the Alumina? http://www.arcticsilver.com/arctic_alumina_instructions.htm Just a thought, or is my MX-1/AS5 not designed to be used like this?
  23. C

    1900xt replacement HSF

    I tend to disagree on that, it is true that the backplate act as a passive heat sink, but bulk of the hot air would be ducted outwards, I have no objection on the VF700s, they look fairly awesome, just that the residual hot air around the GPU would definately be recycled and thus reducing the...
  24. C

    MX-1 Thermal Paste Burn-in/Installation

    And i tried to clear my cache, reset my user setting, reboot my pc.....MEH! Ok, it seems that the drop in the middle is probablt the best thing to do, but i do like the idea of pre-smeard compound filling up the valley. The thread i was talking about was the one that involves discussion of...
  25. C

    1900xt replacement HSF

    According to the recent Anandtech review, the HIS which runs the Silencer is the quietest whilest have the highest OC. I am more than convinced that the HIS cooler is superior because it is the quietest whilest ducks hot air outside and not having hot air piling up in your case. The GPU...
  26. C

    MX-1 Thermal Paste Burn-in/Installation

    Hi Howard, for some weird reason, I can not use the search function attatched to the foru, so i cant locate the other posts.... One of the other thread reported that to cover the microscopic valley, it would be the best if you can thoroughly apply a minor ammount the the CPU and HS base....
  27. C

    New Photoshop Benchmark

    I havn't got my photoshop up and running yet, since i've just recently constructed my rig and it's a bit of a pain to dig out all my stacked away manual and CD-key and so-on. Will be posting back soon! Great topic OP! BTW, why not do a Maya PLE version benchmark...? It's freely avalible and...
  28. C

    1900xt replacement HSF

    The most important aspect of the cooler is that you MUST DUCT THE HOT AIR OUT!!! It is usless if the cooler recycles the hot air around it. So, for a case like the P180, which I have, i'll use the AC ones, since they duct the hot air out... or perform some CNC mod on the side panel and add a...
  29. C

    MX-1 Thermal Paste Burn-in/Installation

    Hi Jedi, didn't realise that you would reply so quick. I think i didn't make it clear enough in my post, so sorry about the misconception What I meant was that any HIGH END GREASE, let it be AS5, ceramique, shin, thermalright or CM, according to your experience does not offer any realistic...
  30. C

    MX-1 Thermal Paste Burn-in/Installation

    Hi all, I know most of the AS5 and Ceramique installation has been covered before and a lot of people, especially Jedi feels that regardless what HIGHEND thermal paste is used, it doesn't have any difference. But oh well, this thing is just as avalible so why not get my self one =D Anyway, I...
  31. C

    Opteron 165 o/cing

    Hi people, i've got mine CCBWE 0551VPMW, and i am currently investigating the OC possiblity with my rig. Basically, i am currently sitting on 2.4 @ 1.3V (yes, i down volted the cpu) with 300*8 I have been sitting on stock volt with 2.4GHZ for a while and i decided to try out exactly how much...
  32. C

    Building a new monster rig

    Wait for vista buddy, you'll be better off. I've heard nasty stuff about the current XP64 causing rendering artifacts (i am a 3D hobbist) and if it causes rendering artifacts, i wont recommend it to be run. So, it comes down the the maturity of 64bit OS/App and HW. It seems that hardware is...
  33. C

    Opteron 165 now priming @ 300 x 9 = 2700mhz

    2.6 @ stock? Wow, I wonder if this is to do with my mobo or the 8.5 multiplier (which is now shown in BIOS and probably not officially supported) but my chip (same stepping) fails prime at 2.55 GHZ, 300*8.5 with stock voltage. If i had water cooling, i wont hesitate to push her to max volt @...
  34. C

    Opteron 165 now priming @ 300 x 9 = 2700mhz

    Heh, coming from Opty 165 users....2.7 GHZ is awesome man! Congrats! I got the same chip, CCBWE 0551VPMW, currently in AUS, with ambient at around 22~23ish. I got my clocked to 300*8 @ 2.4 GHZ and 1.33V, 24hr dual prime stalbe, load temp at 48ish, XP-120 with YS Tech fan, probably shoulda...
  35. C

    RAID 0 = Data Corruption?

    Great! It's all working now, but just one odd problem, after i recalled all my OC settings, my RAM, which was on all AUTO, refuses to give me a correct reading? When I force RAM in bios to 133, which with a HTT of 300 will give me a nice 2:3 divider which equates to DDR400, however, the BIOS...
  36. C

    RAID 0 = Data Corruption?

    Thanks man, i'll sure give it a spin and see how that works out. I'm gonna try installing SP2 again, and if it fails, i'll switch my main drive to the Diamon 9 and see if it will produce any more of these craps....wish me luck! BTW, When I was gonna use RAID for the first time, some dude...
  37. C

    RAID 0 = Data Corruption?

    OK, computer has passed RAMtest without a problem, and now my computer is in a clean state, only windows and nothing else. What are my recommendations? Install my drivers? not to install my drivers? Should I rebuild my RAID and not instally the NV firewall and see if the corruption problem is...
  38. C

    RAID 0 = Data Corruption?

    Is there anything I can do to stop the computer re-booting and stay at the BSOD? So probably narrow down the problem?
  39. C

    RAID 0 = Data Corruption?

    I don't know if i have installed the hot fix you mentioned, I simply used windows update to aquire any update listed there. Also, I have primed my memory using the memory intensive torture thingy, and did that for about 12 hours, and works just fine. I'll give it a go tho...hopefully somethign...
  40. C

    Bad HD or bad...?

    Just a little note, the drives works fine when in RAID 0 config, just that I constantly have problem with downloaded file appearing corrputed or have a bad CRC and things refuses to unzip. Someone suggested turing off the Active Armor Firewall, but I left my firewall on when i went single drive...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |