Need more information. Connection type, Band? etc
Here are some
http://www.wlanparts.com/produ...bg_PCExpress_Card.html
http://www.wlanparts.com/produ...PCI_ADAPTER_250mW.html
If your getting a new card and using Windows 7 get a dx 10 card, if you need PCI look at these
8400gs
http://www.tigerdirect.com/app...dpNo=4104560&CatId=319
9400gt
http://www.tigerdirect.com/app...dpNo=4369749&CatId=319
I know when using adobe cs3/cs4 products like photoshop, after effects and premier pro when you open them on a 32 bit system ( with enough ram ) it says "using x% of 2.0gb ram" and when opening the same programs on a 64 bit system it says "using x% of 4.0gb ram" or somthing very similar to that.
At my house Ive got 4 wired PCs gigabit, 2 Xbox 360s, A WII, A PS3 and a couple of wifi enable win mobile phones. Im using a old AMD64 2800+ with 512mg ram booting off a compact flash card running DD-WRT x86 for the router which is connected to a 8 port switch ( 2 5 ports connect off that in...
just throwing this out there but my PC based dd-wrtx86 router supports 65000+ connections with QoS and pretty much anything else you want a router to do. built it out of spare parts so it cost me nothing. I already had a gigabit switch and I use my old buffalo hp-54 as an access point ( with...
Thats true UHF is just a freq range however, if you where to go to a older individual that isnt techi enough to think like that and you mention UHF they will probably respond " oh you mean the upper channels on my old TV" as they split the channel range between VHF and UHF ( thats for OTA and...
The hdtvs that look like crap on PC are the ones that dont allow 1:1 pixle mapping, they overscan whats being inputed and even using overscan compensation on a PC to fix that the signal is still getting scaled that messes up the picture. you need a TV that has a 1:1 mode for use with PCs and...
Or plug this into the computer connected to your hdtv ( and if you dont have a pc hooked to one your missing out ) and output anything your tv will take.
and for those of you worried about HDCP problems, get a copy of anydvd HD and be worry free.
Thought that this was interesting
http://money.cnn.com/news/news...marketwire/0297289.htm
Cisco releasing a draft2.0 n enterprise networking device. If cisco feels safe enough with the current situation with the ratification of N looming then im sure its an even safer bet now that the...
to be honest an old pc running one of the linux based router OS ( dd-wrt x86, moonwall, Pfense etc) would make a much better, stable router and be able to handle many many more connections than a soho router you would get from bestbuy,circuitcity ect. Just my .02 cents.
I used to have horrible throughput on my vista machines around 10-12 MB a sec on my gig network until I installed the performance,compatiblity and reliability packs that MS just recently released. Now I get 38-39 MB a sec and im not using jumbo frames.
Id say wep128 is very easy to break also, with the latest ptw attack in aircrack I can break 128 encryption in under 10 minuets and thats including still having to boot my laptop.
have an old computer laying around? go over to www.dd-wrt.com and download the dd-wrt x86 and install it on said computer and slap all the SOHO stuff in the face. you could have 1000mb capability on both the lan and the wan side if you felt like it.
Its bad when you consider its on an LCD that isnt 800x600 causing the picture to as ugly as sin. native res on the lowest settings wouldnt bother me that much but running non native no way.
I have a 7900GT that I did the volt mod to when I was running xp, now that I have Vista installed I cant overclock it at all! Even if I use ATI tool, riva-tuner, or n-tune none of them work. Well if anyone has solved the overclocking issue please reply & youll have my thanks. :-)
I installed Vista ultimate recently & encrypted some very important files using the built in encryption from Vista, I reformated & installed Vista Ultimate & now I cant access the files is there any way possible to retrieve them? any help would be far more then appreciated thank you sooo much.
ive used the EMP-8602 with backtrack2/ aircrack, airsnort, kismet and it works flawless. I actually got that card to use those programs. the ar5006 is fully supported by the madwifi linux driver
I agree with replacing the cable modem, Ive had this happen to me twice over the last couple years, both times replacing the cablemodem fixed the issue.
After being in the military I can assure you, there are more gays there per capita than anywhere else and you know what, Im fine with that. One of my best freinds is gay and hes one of the most hardcore soldiers ive ever met.
Im using an engenius EMP-8601 its a 6th gen artheros superAG and yes the range on it is FARRRRRRRRRRRR better than with my original broadcom card in my acer
you could get one of these
http://www.fab-corp.com/product.php?productid=16208&cat=266&page=1
and get the laptop mount that has the mmcx connecter on the end of the pigtail
you can get a u.fl ( I think thats the connecter anyway ) to sma pigtail, install the pigtail on your mini pci card and drill a hole on the back or side of ur laptop and put the sma connector there. there also a nice little snap on mount that connects to your lcd monitor so the antenna mounts up...
I dont think you can beat a buffalo whr-HP-54 with dd-wrt firmware for the money. that being said im now looking into building my own with the dd-wrt x86 software and an old computer I have laying around.
Im tired of the them, they keep messing up my bill and for the last month there service where Im at has been horrible. Want to switch to sprint and say they have SERO running through the 28th. Are there any employees on here that can give me there email for referral?
If your talking about the senao/ engenius card then yes I have it in my acer travelmate and the range on it is FAR better than my original broadcom card. plus I havent noticed decreased battery life with it. Ive had this card in the laptop for id say 8 months now and no problems to date...
Are you saying microsoft is linking to those instructions? If so they are basicly athourizing that method which means they cant really go later and deactivate all the people that used this method.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.