Search results

  1. M

    Did Godfather II killed my 8800GTS ?

    I should try baking before I do that right ?
  2. M

    Did Godfather II killed my 8800GTS ?

    Well that's what I have heard too , that Nvidia is bad with PCB soldering and is the culprit behind this . I would agree with 3DVagabond that I should start looking for a new card. Thanks for the suggestions and links Starcrosser , this means i should give it a try on weekend , in the mean...
  3. M

    Did Godfather II killed my 8800GTS ?

    Please don't say that , there's still some hope :P
  4. M

    Did Godfather II killed my 8800GTS ?

    I ran GPU-Z on my computer and it reports 0 frequency for all three clocks and the temperature was 70c . Apart from it once or twice when I rebooted the system I found the colors and resolution were back to normal but the frequencies were 0 again and temperature was around 50c , after while the...
  5. M

    Did Godfather II killed my 8800GTS ?

    You must be kidding me ! In an oven ?
  6. M

    Did Godfather II killed my 8800GTS ?

    Some of artifacts even show up when the booting screen (A starfighter , I have a MSI P6N-SLI Platinum) shows up .
  7. M

    Did Godfather II killed my 8800GTS ?

    Thanks for your replies :) I think the families are mistaken , its a case of mistaken identity . I tried reinstalling the drivers . Uninstalled them completely , but still the display showed the same artifacts . Installed them again , same issue unfortunately . Any systematic approach to see...
  8. M

    Did Godfather II killed my 8800GTS ?

    Hi all , I was watching Godfather II this morning , suddenly the colors on my screen went all fuzzy and it was stuck , after rebooting I found that colors were 4-bit/8-bit and my resolution was restricted to 640x480 coupled with permanent artificats. I tried reinstalling the drivers but no...
  9. M

    Designing a client-server application using VC++

    Hi! Well i have a project that requires me to collect system specifications from client PCs and then send it to a server application which in turns connects to SQL server and store the data(This is a local network , no internet is involved). The language of choice is VC++ . Now i need to...
  10. M

    Accidentally deleted my Overlord 2 profile!

    @Sandorski Thats really sad! i won't probably play it over again. @JSt0rm01 Its not that bad really! may be i say it because haven't played the first overlord . In my opinion reviews have been kind of harsh for this game
  11. M

    Accidentally deleted my Overlord 2 profile!

    Thanks guys but i deleted it through the game's menu :( there was no reply on the official forums!
  12. M

    Accidentally deleted my Overlord 2 profile!

    hey I just deleted my overlord 2 profile by mistake! :S any ideas you people have that i can recover it ? i just can play it from the beginning! my games folder still have files from that deleted profile though . Thanks in advance!
  13. M

    Final year project in distributed computing

    Hi I'm a computer engineering student and i have to submit a final year project proposal next month, well I'm interested in doing something in Distributed computing such as making a small cluster and may be a bit of grid computing as well , but problem my university requires having hardware...
  14. M

    Need some ideas for my final project

    i think DNA searching is way out of my league! :D thats a great idea Chronosock!
  15. M

    Need some ideas for my final project

    thanks for the input people! I'm still brainstorming :D
  16. M

    Need some ideas for my final project

    yep Beowulf is a type of cluster , but how do i link that up with some FPGA ?controller type hardwork(as i'm pretty interested in htat as well) , i really need an idea...
  17. M

    Need some ideas for my final project

    What about making a Beowulf HPC and feeding it with some huge data through some dedicated hardware/sensors ?
  18. M

    Need some ideas for my final project

    Hi I'm a computer engineering student and i have to submit a final year project proposal next month, well I'm interested in FPGAs and also in Distributed and parallel computing , so any ideas you guys can give ? any idea which combines both of above ? Thanks in advance!
  19. M

    8052 N00B question

    Hi I'm u-controller N00B ,i have just built a 89S52 programmer now i'm trying to implement a 2-input XOR gate on it using XRL instruction, but i cant do it because the instruction requires reading latches and stuff! If there is someone with 8052 assembly experience please help me...
  20. M

    Unwanted XP setup on OS selection

    hey thanks RebateMonger!
  21. M

    Unwanted XP setup on OS selection

    ok this maybe a noob question but i really don't know how to remove this XP setup i ran but realized i didn't need it . It appears on the OS selection screen and has 5 seconds timer so whenever i'm away and computers restarts it ends up running the XP setup! please help Thanks in advance
  22. M

    P6n-sli-platinum audio jack problem

    thanks for adding in! nineball9 ! i do a know bit about this pre-amp and power-amp stuff as I'm an engineering undergrad myself so i can understand you're reply!
  23. M

    P6n-sli-platinum audio jack problem

    ok got the front panel working ! :D thanks again!
  24. M

    P6n-sli-platinum audio jack problem

    i tried to hook up the front panel audio but its not working at all! i checked the mobo-casing connections but still not working! On my mobo there is JAUD1 connector for it has these pins 1.Mic L 2.GND 3. Mic R 4.Presence 5.lineout R 6. MIC_JD 7. Front_JD 8.NC 9.Lineout L 10.lineoutJD and the...
  25. M

    P6n-sli-platinum audio jack problem

    Hi guys! for some time i am having problem with the my mobos sound output , that is when i insert the pin fully into the audio jack it gives output to only one of the speakers and when i slightly pull the pin out it gives output on both of the speakers but the volume goes down then! What...
  26. M

    BSOD in vista

    but i have vista x86 !
  27. M

    BSOD in vista

    i'm getting random BSODs in vista quite often! how do i find what is causing these ??? My rig specs : Intel Core 2 Duo E4300 MSI P6N-SLI Platinum Edition 2 X 1GB Corsair ValueRam DDR2-667 XFX 8800GTS 320MB XXX overclocked edition Cooler master 600W SLI Power supply Thanks in advance!
  28. M

    n00b wireless network question

    ? no replies ?
  29. M

    Tips when buying a used laptop ...

    thanks for your replies!
  30. M

    Tips when buying a used laptop ...

    I'm planning to buy a used centrino Laptop for my sister this weekend (because i want my PC just for me :) ) . I have never been a laptop user , so any suggestions you want me to give when i go out (there are number of shops in my city ) for buying the new lappy ? like what should i check for ...
  31. M

    n00b wireless network question

    Hi guys! Problem is that i am a total n00b when it comes to wireless networking , i really don't know much at all , what i want to do is to wirelessly connect my PC with my laptop which has built-in wi-fi and also share the internet connection ,what should i do ? buy some wi-fi card thing for...
  32. M

    C1E question

    All this is quite confusing!
  33. M

    C1E question

    Thanks ! Now i know
  34. M

    C1E question

    I have this rig e4300 @ 2.8 (stock HSF) P6N-sli platinum Corsair 2x1GB DDR2-667 Value RAM 8800GTS320mb Cooler master 600W power supply at 2.8 Ghz i have turned on the C1E option which switches the the mulitplier to 6x (hence 1.8Ghz) when computer is idle or at a low load , So do this...
  35. M

    e4300 load temps

    thanks ch33zw1z ! BTW what should be "good" load temps form my cpu ? i already got extra fans for cooling the casing, any recommendation for a bang for bang HSF ?
  36. M

    e4300 load temps

    its stock HSF , don't know about the thermal grease (another guy assembled my rig) , casing is no-name chinese
  37. M

    e4300 load temps

    After running my e4300 for a while at 2.8Ghz load temps show upto 70C , so what you guys think ? isn't that really hot for for 1Ghz overclock ??
  38. M

    New graphic card help!!!

    yea just buy the lowest priced 8800GT , 512mb is really enough for that 1280*1024 , just ne sure that warranty is reliable because these big cards do get problems (like my 8800GTS 320mb)
  39. M

    WTF is this pic?

    Yea it really looks like a big bunch of resistors!
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |