Search results

  1. C

    GA-8IPE1000-L Rev. 2 memory speed prob.

    Found the answer in the Intel 865PE chipset specs. It is a limitation of the 865 chipset which only allows a 2.66xfsb multiplier for 400mhz P4 cpu's. There is no way to run the ram at the 1 to 1 rato (2xfsb) on 400mhz P4 cpu's. Both 533 and 800 cpu's have the 2x multiplier (133 and 200x2=266 or...
  2. C

    GA-8IPE1000-L Rev. 2 memory speed prob.

    I have a 1.6gig northwood cpu installed on a GA-P8IPE1000-L Rev 2 mob. The bios is FB. The only memery speed I can select is auto and 2.66. The manual shows a x2.0 setting but it is not in the bios. Has anyone seen this problem? I reflashed the FB bios with no help. Also tried to flash the FC...
  3. C

    Asus probe is acting weird

    Go to my computer/program files/ASUS/probe/ and click on asus pb. Scrol to the bottom to Reverse temp and edit the line MB0=P4S333 to MB0=P4S533 and save and the temp problem will be solved. P4s333 P4 1.6gig 2512Mhz (157fsb) Geforce 2 Pro WD200BB HD 256mb Kingmax DDR 1.675v vcore
  4. C

    1.6a on a p4s333

    Great Mob, my 1.6P4 is running 157fsb 2512Mhz, memory 4/5 2.5 2 2 6 2 which gives me the best performance. It will run at 161fsb 2576Mhz but the memory has to run at 1/1 and the performance is less. V core is 1.7v, memory is kingmax 2700. Only problem was the game port was unstable useing flight...
  5. C

    P4B333 1005 Bios

    Does any one know for sure what the AGP and PCI buss dividers are on the P4b333 mob with the 1005 bios revision? Before I installed the 1005 bios the most my 1.6P4 would do was 160fsb 2560Mhz but after installing the 1005 bios I was able to run at 164fsb 2624Mhz 1.75vcore. Probably not stable...
  6. C

    Studio PCTV on ST6

    :(I have a Pinnacle Studio PCTV card that works perfectly on my Abit BE6-II comp but won't work in any pci slot on my ABIT ST6 comp. Fails the video capture test. Tried installing it with only the GFORCE2 pro video card installed. Win. device manager says no conflicts. Managed to get it...
  7. C

    ST6 sound card problem

    Been trying to install a Diamond DT0398 sound pci card in my ABIT ST6 mob. Disabled the on board sound in the bios, removed the sound in device manager and removed the drivers. When I reboot it keeps installing some windows sound drivers that don't work and when I try to install the diamond...
  8. C

    !.2Ghz Cel Temps

    You can set the fsb in windows by useing cpufsb fine tuneing option, you need to be above the speed where the bus dividers change, at 129fsb I think. May work lower if you change the bus dividers in the bios but I havent tried yet. Most of the settings between the 1Mhz steps won't work but some...
  9. C

    !.2Ghz Cel Temps

    Removed the heatspreder without problem this time, just layed the single edge razor blade as flat as I could get it and started at the corners and worked it around, took about five minutes. The nickle plating on the heatspredder dulls the blade fast so you need to get it just below the hsp but...
  10. C

    Fingernail polish trick

    Ok thanks I will wait for your next post:)
  11. C

    !.2Ghz Cel Temps

    Thanks for the info, mine will run stable at 1600 at 60degf ambient and 40degc temp but have to go lower at 70degf ambient or higher. Ruined one removing the heatspreder by cutting one of the traces on the top of the cpu but probably will have to remove it on this one if I expect to run stable...
  12. C

    Fingernail polish trick

    Has anyone used fingernail polish to insulate vid pins on cpus to change the vcore and what is your experiences. I need to increase my vcore to 1.85v to get my 1.2 celeron to run at 1600Mhz on my ST6 mob. Apprecate any info.:)
  13. C

    !.2Ghz Cel Temps

    What are your temps running, overclocked 1.8v core Heatspreder on? Mine is running 45degc loaded 131fsb which is the max stable overclock, 75degf ambient. Just like to know what the average is. Appreciate any info. Abit ST6 Suma MX video:cool:
  14. C

    cpufsb

    Anybody know of a program that will let you set the frount side buss in windows on a Abit ST6 like softfsb does on the BX chipsets?
  15. C

    Zaped MY 1.2Ghz Cel

    :(Like I said I didn't realise the traces were on the top of the cpu so I was careless and cut some of them, if I had kept the razor blade flat I would not have done that. I removed the hearspreder because the cpu was running hot and the heatsink was cool so the heat transfer between the...
  16. C

    Zaped MY 1.2Ghz Cel

    I didn't realize the traces from the pins to the core are on the top of the cpu and I cut one or more of them when I was removing the heat spreder, expensive lesson. If you remove the heat spredder from the 1.2 cel. be sure and keep the razor blad flat so you will not do what I foolishly did.:(
  17. C

    !.2 Cel on ST6

    :(I have read in the fourms that the Abit ST6 will not support the 1.2MHz Celeron without a BIOS updat. Does anyone know if and when ABIT will release a BIOS update supporting the new 1.2 Cel. or if there is another source for a BIOS patch?
  18. C

    overclocking be6-II with P3 850

    I have run a 566 cel at 1020 and a 700plll at 1.95v a lot without problem, need a good heatsink though. One good thing about Intel cpus is they just lock up if they get too hot rather than burn up like AMD cpus do. Maby 1.95v will reduce the life of the processor but I won't keep them long...
  19. C

    overclocking be6-II with P3 850

    I have a BE6-II and a 700 slot one PIII, at 1.95vcore I Have had it running at 1127mhz and played Q3, it is stable if I can keep the heatsink temp below 61degf. Useing Tonicom pc-166 256mb ram 222. I have some 128mb pc-166 but it is not as good. Don't know what happaned to the Tonicom CO. WD...
  20. C

    1.2 Celeron

    I found it the second time I looked, the only vender that lists it that I could find, not to bad a price for first time list.
  21. C

    1.2 Celeron

    Could not find it on buy.com
  22. C

    1.2 Celeron

    Thanks, I will ck buycom
  23. C

    1.2 Celeron

    Does anyone know when the new Celeron 1.2GHz will be avaliable?
  24. C

    Weird, although minor, problem with an MSI 6309 Ver.1 Solved *Heads-Up for 6309 owners!*

    My MSI 6309 has ganged jumpers that have to be changed to change from FC-PGA cpus to PPGA ones. The jumpers are installed for FC-PGA and removed for PPGA. My mob. is a version 3.2 with an ata-100 controler. The mob. is very slow, 15fps slower than a BM6 in Q3 timedemo 1. Installed the latest 4...
  25. C

    ABIT BM6 question

    Everone needs to rember that you can go down as well as up in the bios so if you jumper the vid pins to boot up at 1.9volts as soon as the bios screen comes up you can reduce the voltage whever you want it. I am running a 533cel at 960mhz 1.9volts core and a 566cel at 1020mhz 1.95volts. The...
  26. C

    566Celeron voltage problem

    I am useing a Global Win Fan with a copper shim and with a 80mm case fan blowing into the heatsink. The 566cpu will not post at 2.05volts at any buss speed, even 66mhz. The 1020mhz at 2.00volts was just a test for fun. It will run at 1020, 2.00volts at a ambient temp of 50degf, case open and one...
  27. C

    566Celeron voltage problem

    I have been trying to run a 566celeron at 1020mhz on a BM6 mob. It will boot into windows and play Q3 a little then locks up. If I try 2.05volts it will not even post. I have a 533celeron which will run at 2.1volts without problem on the same mob. I just wonder if anyone had the same problem or...
  28. C

    voltage on a bm6 with a ceron 600 help!!!

    Dan that is correct, some just bridge it with solder but I like to use a fine tined wire and solder it, it is not hard if you sharpen a small soldering iron and are careful.
  29. C

    voltage on a bm6 with a ceron 600 help!!!

    I don't have any pictures but if you look on cel data sheet page 57, 5.2.2 right top corner you will see the pins that are right together with a vss pin. All you have to do is connect the approprate pin to the vss pin The view shown is a pin side view so it is the same as looking at the bottom...
  30. C

    voltage on a bm6 with a ceron 600 help!!!

    If you connect pin vid3 to vss it initally boots up at 1.85volts but the default is 1.9volts. Voltage range is then 1.3 to 2.1volts. My 533 fc-pga runns stable at 896mhz and 1.9volts. Will run at 920mhz and 1.95volts but not completely stable, plays Q3 ok but eventally locks up playing unreal...
  31. C

    voltage on a bm6 with a ceron 600 help!!!

    The only way to get higher core voltage on the bm6 is to connect the apporate vid pins on the back of the mob to vss. See pages 18 and 57 of the celeron data sheets. pin vid2 is connected to vss thru the cpu on fc-pga cels so that one cannot be changed unless you won't to remove that pin from...
  32. C

    Cant do Voltage trick, what am I doing wrong?!?

    I got the info on how to do the mob mod from a earler post on this fourm and he did it on another board but I don't rember what mob it was but it was a socket 370 board and not an ABIT board.
  33. C

    Cant do Voltage trick, what am I doing wrong?!?

    The only way you can get more voltage on the bm6 is to connect pins vid0 and vid1 to vss on the back of the motherboard. Flashing the bios will not do it. It is really not difficult for anyone who knows how to use a soldering iron on a circuit board, the pins are right together. vss is ground...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |