After reading this, I checked out how my caps are doing, and one of them is swelling, so I'm ordering these and replacing it...
Thanks for the heads up!
I have a cap that's swelling and I want to replace it before it becomes a problem, it's a 6.3v 3300uf cap rated for 105c. I found this on ebay and I was wondering if it's ok... (mine also says KZG on it...)
Also any general tips/recommendations would be great (like a link to a guide...)
Thanks!
I started having problems last week where my comp would freeze randomly, and to make a long story short it turned out to be the SATA cable attached to my OS hard drive. I replaced it and everything is fine, this is the cable that I got with my mobo and I just thought that I'd let everybody know...
that's chinese to me...
In the bios I can choose whether sata ports 0-3 are "raid", "ahci" or "ide" and under that I have the option to make ports 4-5 either "same as 0-3" or "ide" (port 5 is the esata port on the back) so i made the first one raid and the second one ide so that only gives me...
I originally posted this in CPUs but was advised to post it here also...
In power management I lowered the minimum processor state to 30% and the proc speed drops to 1000MHz but after a couple of hours I check again and it's at 3200MHz, I look in power management and lo and behold the minimum...
In power management I lowered the minimum processor state to 30% and the proc speed drops to 1000MHz but after a couple of hours I check again and it's at 3200MHz, I look in power management and lo and behold the minimum processor state is back up to 100% again but all the other power settings...
I made a RAID 0 array and in the BIOS there is an option where I choose to turn on RAID to make SATA ports 4 and 5 work independently of the RAID array (4 is a regular port and 5 is an eSATA port in the back) but I need 2 SATA ports for optical drives...
How do I do that???
TIA
I posted this in a different thread but this thread might be a better place:
This sux (refering to the latest article,where it says that this board may not support 6400+) I just ordered a gigabyte GA-MA78GM-S2H and a 6400+ and according to this article I may have serious problems, should I...
This sux, I just ordered a gigabyte GA-MA78GM-S2H and a 6400+ and according to this article I may have serious problems, should I return it? and If so what mobo should I get?
How do I enable channels 12-14 on a US laptop while in Europe/Japan?
The laptop has an Atheros AR5007EG card which according to the atheros website supports 2.3-2.5GHz which should cover all the way through channel 14.
I tried installing a driver from Toshiba Europe (it's a Toshiba laptop) but...
My friend is getting a specific laptop based on a configuration he specified and the only thing he wants to know is at the same price, which proc should he get, the t5250 (1.5GHz 667MHz FSB 2MB L2 Core 2 Duo) or the t2450 (2.0GHz 533MHz FSB 2MB L2 Core Duo)?
TIA
I'm looking for a good wi-fi hotspot finder (preferably keychain sized)
I also need it to be able to tell me if a network is encrypted or not cause I don't want to waste my time taking out my laptop and booting it up just to find out that it's an encrypted network...
So if you know of one or...
I have a boombox that I got in the states, till now I was using it on a converter but that broke recently and I decided to see if I could just put in a 230v transformer so I opened it up and this is the transformer. On the circuitboard it has this printed along with an arrow pointing here (The...
I'm talking about an 8 series refresh or a release of the 9 series not the super expensive ultra or the "mid-range" cards (mid-range my ass...)
We are having quite enough of these duplicate questions. Search will find you more.
Here is one from the first page that you can join in on.
G92...
Damn! ZZF raised the price from $65.30 to $79.90, I was gonna get it so that I could finally upgrade my video card, but $80 seems like alot to spend on a power supply...
You misunderstood me, I am oc'ing out of curiosity, I didn't purchase the proc out of curiosity, the only reason I bought it was cause I could sell my x2-4200+ for 10 bucks less than the opty 180 cost me so I figured $10 for 200MHz plus a larger cache is not bad so I went for it.
not yet...
I just got an Opteron 180 and more out of curiosity than neccesity I tried overclocking it, at stock voltage I could get it up to 203*12=2436MHz and at +0.05v I could get it to 212*12=2544MHz since the most my board can do is +0.05v that was my max oc, is there something I'm missing? it's not a...
I personally am not running it faster than 250MHz but it was mentioned somewhere in the thread that although later versions of clockgen won't work, version 1.0.4.2 seems to work with this board.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.