You need a used Tuniq Tower with a good 120mm fan that can do 2000 rpms when needed. Also, put as many fans as your case will allow. Good air flow is the key... the tower takes the heat off your cpu and the case fans removes the heat from your case.
Do the same thing they did in this review
http://www.legitreviews.com/article/1313/17/ . It is just like having a personal instructor. I followed it and was able to duplicate their results to the exact numbers. Good luck. Also, if all your doing is gaming I wouldn't get to rapped up in...
Thanks OP, I picked up one this afternoon. They had three motherboards to choose from. I got the Gigabyte GA-P55-UD3R Motherboard for $220 - $30MIR = $190. In-store only. They also had the EVGA mb and a BioStar. I would have gotten the EVGA but it didn't support crossfire. I want to try...
Yeah!, Me too... Anybody want to buy a power supply:) Thanks OP, hopefully I will get the rebate and the $8.60 pending in my Bing account. This is the first time I tried Bing now I'm glad I did. I might keep the power supply after all sell my 8800gtx and 9800gtx+.
Yeah, but most WII's come with a game this one doesn't. I guess it depends on if you want the one with the game already included or $25.00 to buy your own. I'm going to the target deal that has the game already include. If you want to choose your own game then this is the deal for you...
I my experience I think OCZ is still a great company. However, the problem with their ddr2 ram now is that they are no longer using D9's because they are not being manufactured anymore.
The new memory modules they are using are great at using low voltage, but they do not OC as well as the...
Yeah this is a great deal, I picked up one on Monday. It has E0 stepping and runs real cool. I'm running it now at 3.8ghz on air with 1.375 vcore with no problems. I can't get it up any higher though no matter what I tired so far. I replaced my e8500 for this and I'm very happy with it. The...
Thanks for the information, it is greatly appreciated. However, I have the 3200c which does not qualify for the download because it doesn't have a serial number on it. I'll keep looking.
Thanks!
I have a request if you would be nice enough to grant it. Some how I lost my SD drive that came with my Magellan Maestro 3200. I was wondering if you know where I can get a copy of the files on the SD drive that shipped with the 3200 or if you would be nice enough to send me a copy of your...
Thanks OP and Lucifer Lost!!!
I order one at 6:45 this morning for 56.68 shipped. I knew this deal wouldn't last long. I hope the review turn out ok:-)
Thanks OP, I'm in for four. The Cyclone Blower Slot Cooler looks very well made. They are made by Antec so what else would you expect. The price on the package is $11.99 but they will ring up at $1.99 at the register just like OP said. I can't wait to try one out when I get home tonight. I...
Hi All,
Fry's has the Antec 900 computer case on sale today for $74.99 No rebates.
I was at Fry?s in Duluth, GA this afternoon picking up an Antec 300 computer case on sale for $44.99, when I saw they had the Antec 900 for $74.99 no rebate on sale today. I forgot to check to see how long...
Ditto, $51.87 after tax in Atlanta. I'm so happy I'm going to get another one tomorrow:-) I love this case!!! I upgraded from a piece of junk case.
Also, while I was at MicroCenter I looked at the NKS4480 model and discovered it was a lot smaller then this one. I'm glad I had a chance to...
Yeah right, I had to rma at leaste 4 sets of ocz 8500 and 9200 ram, each set 2 times each this year:-(. However, when the ram is running right it is some of the best in the world. I think this is a pretty good deal. Thanks op!
Thanks OP. Ditto! I have this ram and it does 1140mhz at CL 5-5-5-15 and 1030 at CL 4-4-4-15 for about half the price of my ocz reapers pc2-9200. This is a no rebate super deal.
Same here, just got my $75 pc2-8500 + $8 free 2gig flash rebates this week no problems at all. I sold the free 2gig flash drive for another $12, that made the total cost of the ram $75. I think that was a pretty hot deal for me:-)
I'm thinking of buying a set of this 1 gig ram and get my...
I would go for a used e6400 because of the 1066 fsb and 8 multi. You can usually pick one up for about 120 - 150 used. E6400 beats the E4300 series in all the reviews at everything including ocing, plus you virtualization which is starting to get hot.
I have done this with my DS3 in my sig below and have found that it helped stablize my best unstable OC but didn't help me oc any furter. So in a nutshell, it does help a little, but don't expect to much.
I have found that comparing my e6400 (2meg cache, 3dmark05=19560) running at @3.7 to my e6850 (4meg cache,3dmark=20300) running @3.7 there is only a difference in my 3dmark05 score of 740 points using the same setup as in my sig. below.
I work in the IT field so I get access to these chips...
Many thanks to everyone who responded, I appreciate your input!
I guess I'm talking more about cpu and ram moving or processing data in 1333 chunks rather then in 1066 or 800 mhz chunks per cpu cycle even with the fsb running at the same 1333 if that makes any sense. Maybe it is just my ram...
Hello, I have read review at toms hardware and other fourms that say the new P35 motherboards will run the older 800 fbs chips at 1333. Can anyone verify if this is true or not?
Has anyone done the pin mod and got and 800 fbs chips to work at 1333 on a P35? I'm wondering if I really need...
Sounds like a great deal, thanks OP!
I got my rebate on time about three months ago when I purchase some pc2-1066. First they sent me a post card stating they didn't receive a copy of the vendor invoice and I no I sent it in. I sent in another copy and they processed the rebate no problem...
Using 2 gig of pc2-8500 oc'ed pc2-9200 ddr2@1150.
I can oc my E6400 to 3.7(8X458)@1.57 volts with 2 gig at 5-5-5-15@2.3volts ddr2-1158 4:5.
Using 4 gig of pc2-8500 oc'ed pc2-9200 ddr2@1150.
I can oc my E6400 to 3.4(8X425)@1.57 volts with 2 gig at 5-5-5-15@2.3volts ddr2-1158 4:5...
Ok, this is a sweet deal, I just got mine yesterday and I was able to run them 1187 5-5-5-15 at pc2-8500 and 1150 at pc2-6400. That's pc2-9200 for $89.00 if I get both my rebates:D
Only wish I could have bough another one. I'm going to sell my pc2-9200 OCZ Reapers for around 200.00 and...
Great find;)
Thanks OPT!
I'm in for 2 gigs. This should give my gateway NX570 a real nice boost going from 512meg to 2gig. With shipping the total came to 64.27. I was just about to jump on a Fry's 2 gig deal for 79.99 so I'm glad I seen this tonight, I would of had to pay tax at...
All I can say is people still gaming running their ram at 800mhz have no idea of the performance they are missing out on. I'm not talking about bench marks, I'm talking about the raw speed of running your ram at 1066, especially if it supports EPP.
If he is not going to oc, then he needs to...
If your just looking to save money, get the RAM suggested above. However, for about $140.00 you can get some OCZ SLI PC2-8500 with EPP that will run 1066. Believe me it does make a different in your gaming experience. I have your same setup, but with the E6400.
Some of the better brands of...
Thanks OP!
WOW, sounds like a great deal, to bad the tax make it $12.00 higher for me. However, if I do buy one it would be the 512meg version. I always wanted to try out this card and I find that the higher ram cards run a lot smoother then the lower ram versions.
Does anyone know if...
Hey Ditto! I just checked my rebate status after sending in my invoice again. Now my Claim Status is: Received, Submission is being processed:)
I don't have a check yet but I'm feeling a whole lot better about geting my rebate, especially with ryderOCZ showing up in the forum. ryderOCZ...
This is a very hot rebate deal, thank op!!!
Right now, I'm having trouble collecting a $10 rebate on some ocz sli 1066 edition I bought about a month ago. I sent in everything and they send me a post card saying please mail in the name or the retailer. I mailed in another copy of the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.