Search results

  1. A

    Unofficial Asrock P45/P43 board thread

    Ok so I found out the overclocking problem I was having with this board. There is a FSB jumper that should be set to the maximum (1600 FSB) and then there is really no limit to this board! Overclocked straight to 420 FSB no worries ... didn't need to tweak anything. And I feel it could easily go...
  2. A

    Unofficial Asrock P45/P43 board thread

    Hi Pun, So the ASRock board I won P43Twins1600 has arrived and I've set it all up :) From what I see from your link above the Bios' on these boards are the same. Could you post what settings you used for the first advanced page (CPU Configuration)? I'm having trouble getting it past 300 FSB...
  3. A

    Unofficial Asrock P45/P43 board thread

    If possible it would be interesting if you could please check the following: get cpuz if you don't already have: http://www.cpuid.com/cpuz.php and in the Memory tab check: - Frequency & - FSB:DRAM (the top 2 in the Timings frame) This will show your actual memory frequency and the...
  4. A

    Unofficial Asrock P45/P43 board thread

    Depends who you ask - it is documented you 'can' go up to 1.5v (but then of course you really have to watch the heat generated!!) but for me I wouldn't go above 1.4v for 14/7 usage. So you are CPU limited then since you need to raise the voltage to continue. That is good news for higher multi...
  5. A

    Unofficial Asrock P45/P43 board thread

    no it's not possible to change the muliplier. So currently you've got the board O/C'd to 377 FSB? So what is the limiting factor to get to 400 FSB to match your RAM 1:1? I've forgotten what the max for a Q6600 is but 3.4ghz seems pretty good so maybe that is it on air! EDIT: Going by the Bios...
  6. A

    Unofficial Asrock P45/P43 board thread

    Could you please post a link to the proclocker review? Can't seem to find it EDIT: thanks for adding the link :)
  7. A

    ASRock P43/P45 Contest

    Whoahoo I won a P43Twins1600 :) ... no threads on here yet on these boards and how they overclock?? Usually ASRock are bad overclockers but this is the P45 chipset so it has to be ok? Anyone seen any overclocking information on these boards?
  8. A

    *** Official Gigabyte P965-DS3 Thread ***

    yeah it's very important for stability with this board to cool the NS heatsink. I just bought a 5? small fan and superglued it to the top just like this: http://www.hardforum.com/showp...030455017&postcount=10 before I couldn't even touch the thing for a second without my finger burning...
  9. A

    *** Official Gigabyte P965-DS3 Thread ***

    only other thing I can think of is the power supply ... do you use the same one as with the Abit board ? What is the psu ? thx amenx I think I might try it out ... a 1gig kit of ddr2 is so cheap atm ! and 2gig does not seem enough when gaming in Vista ! I'm running at 97% in bf2142 and vista !
  10. A

    *** Official Gigabyte P965-DS3 Thread ***

    Anyone know how the following memory configuration goes on this board ? in particular in keeping dual channel and overclocking ? 2 x 1024 DDR2-800 with 2 x 512 DDR2-800 same specs and manfacture for each kit ... only the size is different
  11. A

    *** Official Gigabyte P965-DS3 Thread ***

    had a quick look for you and found the following pretty much everywhere 1long, 2 short Video adapter error Either video adapter is bad or is not seated properly. Also, check to ensure the monitor cable is connected properly. http://bioscentral.com/beepcodes/awardbeep.htm i'd try...
  12. A

    *** Official Gigabyte P965-DS3 Thread ***

    what does Add support for new super IO version mean ?
  13. A

    *** Official Gigabyte P965-DS3 Thread ***

    I believe Marklo meant that the voltages in your bios require adjusting not that your power supply is inadequate. This would be especially true if you say you set your Voltages to Auto (the flashing message) to get it working ... this means that the board adjusts the voltages itself (usually to...
  14. A

    *** Official Gigabyte P965-DS3 Thread ***

    haven't had any static noise problem ... what are your current oc settings ? To keep a 16x pci-e link width while overclocking you need only to set the frequency between 102-105 as I said above :)
  15. A

    *** Official Gigabyte P965-DS3 Thread ***

    I'd also like to know this ... but never seen a program that can show these other voltages yet ... apart from speedfan which shows your ddr2 voltage (it's the voltage above or below your cpu voltage) I would try putting the cpu Vcore to 1.4 just to see if that can get you stable at 3.0ghz...
  16. A

    *** Official Gigabyte P965-DS3 Thread ***

    For me the increased pci-e settings I quoted on the last page gave my ram nothing extra. Memtest86 test #8 still fails if I try going higher than 430. So the settings and voltages i'm using for now until I get better ram are: PCI-E OverVoltage Control_ [+0.1V] FSB OverVoltage Control___...
  17. A

    *** Official Gigabyte P965-DS3 Thread ***

    reading through the posts in http://www.hardforum.com/printthread.php?t=1169366&pp=20 there are people having similar 'cold boot' fsb resets and it's stated it's due to some OC setting not being stable. I had it once, tweaked a few settings in my bios and haven't had it since :) - I think...
  18. A

    Suddenly no mouse or keyboard with Vista in games

    For some reason for the past 2 days in every game i've tried my mouse and keyboard have stopped working. They are fine in Vista and the game menus but are completely locked in the actual game - except strangely enough I can "alt-tab" out of the game ?? Anyone got any ideas ? I've tried...
  19. A

    *** Official Gigabyte P965-DS3 Thread ***

    I noticed the same problem this morning when I booted up. I had: E6300 @ 430*7 = 3.0 Vcore 3.750 pci-e = 104 (+1 step v) Upon turning the pc on fsb and cpu host control were reset as described above. Anyone got some ideas ? Could it really be related to ide devices ?? I have recently...
  20. A

    ASRock 775Dual-VSTA

    I had no problems with the latest drivers in XP mode. If you remove the drivers in safe mode and boot is winxp visible without any nvidia drivers installed ? If not then not a driver issue ...
  21. A

    ASRock 775Dual-VSTA

    This looks correct to me ... 3DMark05 score is very gpu dependant not cpu dependant hence the similar scores ! And as the 3Dmark06 score it is your gpu that is holding you back not the cpu. check this link: http://service.futuremark.com/orb/projectsearch.jsp and you'll see that most...
  22. A

    *** Official Gigabyte P965-DS3 Thread ***

    thx for the info ... will give it a try tonight :)
  23. A

    *** Official Gigabyte P965-DS3 Thread ***

    and some more questions on some of the bios options: 1) Robust Graphics Option - comments on effectiviness ? 2) Where can I see what my current memory voltages are ?? I don't see with cpu-z or EasyTune 5. In the bios they are set to Auto. 3) I have 1 8800gts gpu is it worthwhile to...
  24. A

    *** Official Gigabyte P965-DS3 Thread ***

    So I have this board now :) Gigabyte DS3P (rev3.3) latest F4 Bios E6300 evga 8800gts 320 Winxp with the latest nvidia drivers First boot ran 3dmark06 everything worked fine. Next boot my Graphic Interface Link width has been reduced to pcie x1 :( :( What I did between boots was...
  25. A

    ASRock 775Dual-VSTA

    I assume 2.7 bios just adds support for the new Exx20 core 2 duo cpus ?
  26. A

    ASRock 775Dual-VSTA

    My new mobo still hasn't arrived yet so I tested the gpu on this mobo. evga 8800 gts 320 ACS3 KO edition 3dMark06 (Vistax64) Overall: 7759 SM2.0 3703 HDR 3383 CPU 1823 at least a few thousand less than on another mobo as i'm lead to believe but not bad. Strangely...
  27. A

    ASRock 775Dual-VSTA

    timzak is correct ... that's what I did 6months ago with this board ... during this time I upgraded my RAM and now today I get my 8800gts 320. Decided to do the mainboard switch now that everything is complete and get a Gigabyte P965 DS3. Looking forward to finally getting some Overclocking...
  28. A

    ASRock 775Dual-VSTA

    thx pcjjman for the info !!! ... ordering my 8800gts 320 today ! :) I think I splash out and get the new mainboard to (Asus P5N-E sli) and be in debt for a month ;)
  29. A

    ASRock 775Dual-VSTA

    so i'm getting a Evga 8800gts 320meg :D got an offer for my 7800gs apg that I couldn't refuse Can anyone confirm / find out if the new nvidia 8800 winxp drivers will help on this board ?? Otherwise I just run it in Vista (by the way can anyone here actually confirms it works in Vista). I'd...
  30. A

    ASRock 775Dual-VSTA

    Nice Find !!
  31. A

    ASRock 775Dual-VSTA

  32. A

    ASRock 775Dual-VSTA

    How come they got a 8800gts working in all pci-express speeds here: http://www.tomshardware.com/2007/03/27/...s_scaling_analysis/page8.html#3dmark06 ? but a 8800 doesn't work on this board :( :( acording to the review it sounds like a bios problem on most motherboards to run at low pci-e...
  33. A

    ASRock 775Dual-VSTA

    hmmm but I run already at the tightest timings I think ... I thought maybe I try going back to 290FSB because it might be a different ratio but decrease in performance: What memory ratio do u have pengo ? I assume it would be same but could be something to check Does anyone know what the...
  34. A

    ASRock 775Dual-VSTA

    so why such a difference in the Sandra B/W scores do u think Pengo since we have similar setups ??
  35. A

    ASRock 775Dual-VSTA

    Mem - Mem B'wdth - Mem Latency - cpu FSB - Mem FSB - Ratio - Timings MDT -DD2-667 - 4924/4938 - 125/86 - 305 - 228.9 - 4:3 - 3,3,3,3,9,1 MDT -DD2-533 - 4895/4922 - 125/82.3 - 305 - 228.9 - 4:3 - 3,3,3,3,9,1 MDT -DD2-667 - 4825/4884 - 130/91 - 305 - 228.9 - 4:3 - 4,3,3,3,9,1...
  36. A

    ASRock 775Dual-VSTA

    hmmm ... i'm running 1.9 bios - voltage high - vlink is fast ... oops is that pipeline thing mean to be enabled ?? I think I disabled it will have to check But my Sandra's b.width scores are much lower ! around 4400 ... is it possible scores are better at 533mhz ?? EDIT: ah ok now at 4950...
  37. A

    ASRock 775Dual-VSTA

    Well I finally upgraded my RAM: MDT 2048 DDR2-800 CL5 I put it in and booted up at my previous FSB of 300 with no problems. Tweaked the RAM timings and FSB and ended up with the following: RAM: 667 @ 3-3-3-3-9-1T FSB: 305 Booted fine at 310 as with my old ram (MDT DDR-400) but failed...
  38. A

    ASRock 775Dual-VSTA

    my friend has a 7900gs with this board and has no problems
  39. A

    ASRock 775Dual-VSTA

    thanks for the dx10 gpu update MrVain ;) 1. Anyone tried OCZ DDR2 Gold series RAM on this motherboard ? 2. Anyone tried DDR2-1000 (PC2-8000) RAM - I assume it would work just underclocked ?
  40. A

    ASRock 775Dual-VSTA

    any news on the 8600 cards coming next month then ? Will they work on 8x or 4x pci-e ?
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |