Search results

S
*** Official ASUS P5B / P5B Deluxe Thread ***

I dunno about the RAM compatibility. Some search around in this forum and xtremesystems.org should help you find out. As for the SATA options, NVIDIA sata is the fastest and the next best is this Intel onboard one. So don't bother with the JMicron or whatever other option, except for the optical...
- skarkar
- Post #848
- Feb 7, 2007
- Forum: Motherboards
S
*** Official ASUS P5B / P5B Deluxe Thread ***

Hmm I too had this problem. I upped the FSB to 1.45V and it went away.
- skarkar
- Post #846
- Feb 7, 2007
- Forum: Motherboards
S
*** Official ASUS P5B / P5B Deluxe Thread ***

I've set RAM to 4-4-4-12 in the Chipset section of the BIOS. Only the POST screen shows DDR2-4300. Inside windows cpu-Z shows DDR2-668 and 1:1 with FSB and CPU @ 3GHZ. 2 instances of SuperPI passes at this setting, while Orthos SP2004 failed after some 2hours 46 minutes. Do I need to up the RAM...
- skarkar
- Post #834
- Feb 5, 2007
- Forum: Motherboards
S
*** Official ASUS P5B / P5B Deluxe Thread ***

AFAIK, Intel uses Quad Pumped bus meaning 400 FSB is effectively 1600, or 800 per RAM channel, which sets RAM to DDR2-800 IMO.
- skarkar
- Post #825
- Feb 4, 2007
- Forum: Motherboards
S
E4300 Overclocks?

I'm running a 4300 on Asus P5B and got it stable at 3 GHZ, 9 multi, DDR2-667 333 FSB at stock voltages and stock HSF. My RAM runs fine at 4-4-4-12 DDR2-800, but if I set FSB to 400 and RAM to DDR2-800 and up the CPU voltage to 1.525 system doesn't POST. Any FSB holes at 400 in the Asus-P5B or...
- skarkar
- Post #74
- Feb 4, 2007
- Forum: CPUs and Overclocking
S
E4300 Overclocks?

Just downloaded coretemp and it shows the 2 cores at 65-68C with the TJunction being 85C whatever Tjunc means. So, ASUS PC Probe is reporting > 10-15C temperatures in my case :( Am getting some arctic silver and some antec coolers. Let me know of some good antec coolers, for the 4300.
- skarkar
- Post #64
- Feb 3, 2007
- Forum: CPUs and Overclocking
S
E4300 Overclocks?

Yes, I'm using Transcend JetRAM DDR2-667 at FSB 333 1:1 and its kinda stable except for the one failure with Prime 95. I've been doing all this with stock HSF and stock voltages, a budget setup for sure. My RAM runs fine at DDR2-800, as most 667 RAM can run at DDR2-800 also, but I guess I need...
- skarkar
- Post #63
- Feb 3, 2007
- Forum: CPUs and Overclocking
S
E4300 Overclocks?

Hi, Memtest passed 3 full tests, 10 passes of test 5 alone. SP2004 ran stable for 15 minutes, before I ran 2 instances of Super PI which finished in 30min37secs successfully. Max temp till now was 63C in my Asus PC Probe. Then I ran Prime95 2 instances(each with 512 MB in torture test and CPU...
- skarkar
- Post #62
- Feb 3, 2007
- Forum: CPUs and Overclocking
S
*** Official ASUS P5B / P5B Deluxe Thread ***

I've set AI tuning to manual, CPU freq to 334 and RAM to DDR2 668. BIOS boot screen shows 3.01 GHZ as expected, but also shows dual channel DDR2-4300(533) instead of DDR2 668. In memtest, I get 4198 MB/sec for RAM speeds. I've set CAS 4, RAS-to-CAS 4, RAS precharge 4, RAS activate to prefetch...
- skarkar
- Post #821
- Feb 3, 2007
- Forum: Motherboards
S
*** Official ASUS P5B / P5B Deluxe Thread ***

Hi All, I can get my RAM to run at DDR2-800 from its DDR2-667, however it seems the motherboard FSB can't be raised too high. I'm using the stock cpu hsf and the passive NB cooler that came with the P5B. Suggest the highest cpu, mem and NB voltages I can use.
- skarkar
- Post #820
- Feb 3, 2007
- Forum: Motherboards
S
*** Official ASUS P5B / P5B Deluxe Thread ***

Just got a P5B with C2d 4300 with 2 1 GB DDR2-667 sticks of RAM. Upon booting, I ran into CPU uCode errors and after updating to 1102, it went off and both cores @ 1.8 GHZ were detected fine. However, when I set the AI OC to manual and set cpu bus to 333 and RAM to DDR2-667, it didn't boot @ 3...
- skarkar
- Post #817
- Feb 2, 2007
- Forum: Motherboards
S
Core 2 duo 4300 overclock

Thanks for the HSF suggestion. The other thing I wanted to know about is whether Transcend JetRam DDR2 667 can also run at DDR2 800 speeds?
- skarkar
- Post #3
- Jan 31, 2007
- Forum: CPUs and Overclocking
S
Core 2 duo 4300 overclock

Hi, I've got a deal here in India where the Core 2 duo 6300 is INR 8900 or around USD 198 and the Allendale 4300 is also the same price. I guess with a DDR2 800(or DDR2 667 memory overclocked to DDR800 levels) memory+FSB, I can get almost 100% overclock to around 3.6 GHZ. I can get Antec...
- skarkar
- Thread
- Jan 31, 2007
- Replies: 2
- Forum: CPUs and Overclocking
S
Heavy load email server

Hi, I've got a very heavily loaded email server, which connects to 2 private networks in our office. It has around 100 GB of emails, with around 35 IMAP accounts, some as big as 10 GB while the smallest is around 100 MB. The biggest IMAP accounts, some 5 in total, consuming a total of around...
- skarkar
- Thread
- Aug 26, 2006
- Replies: 0
- Forum: Computer Building

RESOURCES

Top Bottom