Thank you all for the replies! Unfortunately is seems the Radio Shack no longer makes that model so I can't provide a link for it. It did come with the box and instruction manual - Is there anything specific I should look for?
Anyway, thanks for the help as my knowledge in this area is...
Got a question for the people in the know about scanners: About a year ago my neighbor showed me his home scanner setup and let it slip that he has his system modified so he can hear cordless phone and cell-phone conversations. He has a 50 foot antenna and a couple thousand dollars worth of...
Give it away. Let someone else gain some enjoyment from it. You had yours, now pass it on to those that will actually use it and benefit. That's what charity is about.
Whenever I run CHKDSK on my C drive it (the entire system) freezes at 72% and I have to reboot. I have tried it 4 or 5 times and it always gets hung up at the 72% mark. I have also noticed that when I run the full system scan with Norton AV 2002 it will also freeze up after 30 minutes or...
That's great! Thank you all very much for helping me out, it really is appreciated. Now I'm off to get an Advanced AV pack and enjoy the sound upgrade.
Thanks again!
I got a nice receiver for Christmas and want to use my xbox with it. The problem is that my tv is an older model and only has 2 RCA connectors for inputs (1 for audio, 1 for video). Will either the Advanced AV pack or the HD pack let me connect the sound through my receiver (I have an optical...
Thanks to everyone for your help, and it looks like I won't need to return my receiver after all :) I guess I need to take a crash course in Stereo terminology, but I have always had a "tin-ear" and never had too much of an interest in anything of that nature.
Anyway, I really appreciate the...
I got a Kenwood VR-605 receiver for Christmas and noticed it doesn't have a 5.1 channel input... How important is this and should I pay the extra and exchange it for a model that does? I'm not an audiophile and just plan on hooking this up to my tv, 5 disc cd changer and x-box system. I have...
This will be my new system:
AMD XP2100
MSI KT3 Ultra2 ARU
Gforce 4 ti4200 128mb
256mb PC2700
Antec Solution Series heatsink/fan
WD 60gb - 5200rpm
WD 20gb - 7200rpm
3.5" floppy
Lite-On 16x DVD
Plextor CD-RW 12x10x32
Lite-On CD-RW 32x12x40
Enlight 7237 case, modded with three 120mm Panaflow fans...
Need a new power supply for a system I am building and came across their 420watt self branded PS. Anyone have experience with these? I plan to run an XP2100 system and doubt my old Enlight 300watt would do the job.
If your MS optical mouse ever breaks or starts malfunctioning, just call this number and press "0" to talk an operator. They will ask you for a # on the bottom of your mouse, take your mailing info and then send you a new one. They do not ask you to send your old one back. My right mouse...
Curts, huh? I have never heard that name either. Since I couldn't remember the name of the bottled water I couldn't find her name on google or other search engines. Anyway, thanks! I'll have to try and find some pics :)
There is a commercial for bottled water (can't remember the brand) that shows a great-looking brunette walking through several offices, drinking the water, while a band plays "She's a brick House!" in the background. What is her name? I think she is also in the Miller Lite commercial where...
I live a little west of Cape Girardeau and make it a point to always fill up in either Cape or Jackson. I bet the owners of all the other gas stations are hating life because of the Basic Gas stations, LOL. Nice to see some locals on the forums!
I had to jump in on this deal also. Will use this printer to replace the Epson 740 I got last year for less than $20. The Epson is still going strong, so the new one might stay in the box for a while.... nah, gotta open it and try it out! LOL.
I called my CC company today and found out that Migrate Zone had been "approved" to charge my card 4 times, but had not actually charged it. They are just approved should they decide to charge me. So I guess each time I got the message stating my address was incorrect, it was good...
Wow, glad someone was able to get through to them on the phone. I had the # on speed dial and hit that button every 5 mins or so all afternoon. All I ever got was the recording saying all the customer reps were busy (never got a responce to my email either). Oh well, if they actually go...
I'm starting to worry about this deal... Yesterday I tried ordering this ram, and each time I would get a message stating "address does not match credit holders account - Order cancelled" or something to that extent. So figuring I made a spelling mistake or whatever, I went back and...
Finally bit the bullet and decided to order. Tried 5 times and each time I get a message saying the adress I submitted does not match the one on my cardholder's account (I have placed 5 orders from other online companies this month with the same card and address!) Tried calling about 15 times...
Thanks for the replies everyone! I really appreciate it. I think I'm going to do a bit of memory-homework before I make my purchase, so I actually know what I'm doing (at least more so than now, LOL).
Okay... Question here (my knowledge of memory isn't that great). Will this memory work okay with my MSI K7T Pro2a Motherboard (Duron 700@850)? Or would I be better better off going with something else?
I'm using Windows ME and Outlook Express 5.5. Everything works fine, but my "Mail received" status bar always shows my mail as being delivered 1 hour behind the time it was actually received. i.e. If i check my mail at 4:22 pm and get 2 emails, both of them will show that they were...
Just got an Enlight 7237 and have been modding it slowly for the last few days. I notice that the motherboard mounting "brackets" are metal... In the past, all of my mobos have used those plastic standoffs, that pop into the holes of your mobo and then slide into the case tray. My...
That's why I want to do it, MaximumAdvantage. Mostly for looks, but the finger guard should also let more air through. I am going to practice with a drill, dremel and jigsaw on the bezel of an old AT case and see how I do... It doesn't have to be a perfect hole, as I plan to use molding...
I was afraid of that. A square hole would be so much simpler to cut accurately/smoothly, but I want a round one to mount the fan grill in. I have almost decided to go with a Panaflo 120mm to the front bezel now, so it's double jeopardy! LOL
I want to add an 80mm fan grill to the front of my Enlight 7237 case to increase airflow. So what would be the best way to cut the round hole out of the plastic? (is it called the bezel?) A jigsaw worked great cutting the metal parts of my case, but I'm afraid a jigsaw might not be well...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.