well got a dilema now,
with the F10 bios seems to be stable at 450Mhx~FSB but gets rocky above that, F7 was better for me. But now i have had my faulty Asus p5B-Deluxe Wi-Fi replaced and its sitting her screaming to be hooked back up. Really not sure what to do now :)
No issues with Miron...
Got the F10 Bios Installed after trying F9 and having loads of problems.
Loads of problems with the F10 also, having to use really loose timing's on my Geil D9 based Dram. like 5-8-8-20 shockinlg loose. Dont know really why there should be a problem here, I worked for Micron for 2 years in...
Lo M8,
I have the rev 2 board and as I said I am no Noob, I always clear the cmos after a flash. Remove power inc 24Pin Atx and 4 pin molex, remove battery and install the jumper for at least 10 mins :). I was working with Bios chips and programmes 20 years ago, in fact I can probably tell...
Lo M8,
I have the Geil Ultra PC6400 and I worked for Micron for years :) Does that tell you something. They all use mostly the Micron IC's anyways :) and mostly Brainpower PCB's.
Had Geil for years, no problems and when i did get the odd problem sorted out pretty quickly form thier Taiwan...
Well,
after spending nearly 5 hours on the f9 bios after the recent update on the Anandtech site, what a waste of time. Firstly just to point out I aint no nOOb, I have been a test engineer for Compaq/Hp for over 10 years and worked as a debug tech for 9 years in Compaq. I have been...
Lo All,
Just tinkering with my new watercooling and also my New DS3-Rev 2.0 board. I had a P5BDeluxe - WiFi Edition and it was pretty good until it died on me on the run up to XMAS. Contacted Scan for a replacement and they said I would have to wait until after 3rd Jan 2007 Poor Service that...
Hi all,
Has anyone every tried using the external filter/pumps for fish tank on their water cooling set-up.
I am going to upgrade my PC Cooling rig from a big water kit to a better water block etc. I have a fluval external pump/filter sitting doing nothing.
Has anyone ever tried using...
Madellga,
What I am finding the more volts I am giving the CPU the more heat and the less reliable the CPU is, when I took the board to 7x500mhz I only had in the bios 1.35 Vcore and it ran quite a few test without issue. I have backed the CPU down to 7x430 just slightly over 3ghz until I...
Hi Myocardia,
thanks for the info, had the memory timing running at 5-5-5-15 and really did not make any difference. I also ran memtest and the ram was fine at these speed, used to work for Micron before they closed the Scotland Op's in Engineering Dept :(
One thing I have really noticed...
Hi All,
Just built my new E6300 system consistong of the following
E6300@3.15Ghz 7x450 @ 1.35v
Asus P5B-Deluxe Wi-Fi
Geil Ultra PC6400 @ 900Mhz 4-4-4-12, @2.3v
Antec True-Control 550 with 20Pin ATX to 24 Pin ATX Adaptor
Nvidia 512Mb GTO (MSI) @ 700mhz Core/ 800Mhz Memory
Various SATA...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.