Search results

  1. C

    Hard drives.....does it matter how many pins??

    Umm... yeah, that's why I said theoretically faster. Since a SATA II drive can theoretically move more information per second it is THEORETICALLY faster, if not actually faster at the moment, and I was going to explain that but the question was "should I buy a 22 pin HD" and I figured it really...
  2. C

    Hard drives.....does it matter how many pins??

    You're probably going to want a SATA HD, as long as it says SATA or Serial ATA (SATA II, SATA 1.5, SATA 3GB, etc.) it'll be fine. The SATA II 3GB/s drives are theoretically faster. You could use an IDE (EIDE, Ultra ATA) HD but it I think you've only got one IDE slot (which will control 2...
  3. C

    E6400 seems stable at 3.2 but need some tweaking help

    might be too obvious but you didn't say... did you check the manual for what error 1 long and 3 short beeps is coded to? I've never used ASUS but I know that G-byte has a beep code list at the back of the manual.
  4. C

    RAM Timings

    General consensus seems to be that RAM speed is more important with the Intel chips b/c of the off die controller. So you should see more performance gains/losses related to timing on an AMD system than on an Intel, and more gains/losses related to RAM speed in Intel systems.
  5. C

    New computer...

    Since you don't want to spend the time doing any research yourself why don't you just read one of the hundreds of other "is my rig cool" posts and copy somebody's system?
  6. C

    Is the Antec TPII or the Ultra X-connect 2 better?

    I work for Antec? Sweet. That's some pretty awesome flaming there JEDIYoda. For the record there is plenty of anecdotal evidence for the high fail rate of the Ultra line of power supplies too, just google it (I don't feel like digging for links). However, Antec has been around for much...
  7. C

    Why Lian Li?

    1-A Case isn't "General Hardware"? There's a mobo forum, but people are always talking about mobos here. People even asking about screwdrivers and paint in this forum... 2-Seriously just curios
  8. C

    Why Lian Li?

    What's so great about Lian Li cases? Never having seen one in person I guess I just don't get it. My CM Centurion is great, well built, easy to use, good air flow, I like the way it looks, etc. and it cost about half as much as most LL cases. I'm just curious.
  9. C

    Is the Antec TPII or the Ultra X-connect 2 better?

    Odds are very good that, unless you are really pushing your system to the limits, the Ultra will work fine and that nothing bad will happen... but the odds are also good that the antec will work fine and nothing bad will happen longer. If you wanna throw the Ultra in there go for it... despite...
  10. C

    Mid-range built critique, <1k

    With the e6400 the RAM becomes a bit less important. With the 8x multiplier on the e6400 you get a 3.2Ghz core clock with your RAM running at 800 or 3.0 @ 750. So you don't have to necessarily upgrade them both to get a solid OC. That PSU will probably run the system, but you'll be leaving...
  11. C

    Is it really hard??

    You really don't need that much power, and Tagan is probably a step behind some of the higher end PSUs. That RAM is probably overkill the Crucial Ballistix DDR2 1000 on sale at Newegg would be good. There's nothing wrong with your other choices except that you might be going a bit overboard...
  12. C

    Questions regrding my build

    The best way to do it is to isolate the components, but you'd have to have another system that you can swap them into. If you have a spare PSU you could try that. Also you can pick up a cheap PSU tester for around $10 online or at a local computer shop...
  13. C

    Mid-range built critique, <1k

    I'm running this at 940 http://www.newegg.com/Product/Product.asp?Item=N82E16820231098
  14. C

    Is the Antec TPII or the Ultra X-connect 2 better?

    Antec, no question. Antec has _almost_ always made a solid product. A few years back they had a pretty high fail rate with one of their OEM manufacturers and some folks believe everything they read. There's nothing wrong with an Antec True Power.
  15. C

    Mid-range built critique, <1k

    you may be right about the video card... I didn't read it that carefully but as far as the RAM goes... if run your RAM at 800 the highest OC you can get on the e6300 is 2.8Ghz though the CPU should be capable of 3.2-3.3+ on that board. currently I'm running the same Mobo and CPU at a 470FSB...
  16. C

    It's a bad day when...

    I feel your pain. In August all three of my systems died in the same week. My main gaming/surfing rig burned out a PSU. My #2 desktop fried a RAM module. And my monitor on my Laptop bit it. Luckily I didn't lose my Dissertation in the process...
  17. C

    Mid-range built critique, <1k

    three things. 1) your ability to "OC the system as much as possible" will be hampered by DDR2 667 Value RAM, look 800 2) a 400w PSU is pretty skimpy for that set up 3) $300 is too much for that Video Card.... this is faster and cheaper...
  18. C

    Critique this e6600/p5w dh system please

    The Thermaltake Toughpower line is very good, much higher quality and efficiency than their older designs, on par with (maybe better than) those Enermax choices
  19. C

    Good inexpensive UPS

    Any recommendations for a UPS that's fairly inexpensive but will run my rig for 10-15 minutes... unobtrusive drivers would be nice too
  20. C

    What is at fault?

    I run at 965P-S3 and my HSF does the same thing. There's an integrated fan controller that doesn't throttle the HSF to full speed right away and it doesn't start really going until windows starts booting.
  21. C

    looking for some general recommendations

    black friday is the day after thanksgiving...
  22. C

    OCing my e6300

    up the vDimm, add .1 to the FSB and MCH voltage and try again if it's still unstable loosen the Ram timings, oh and if you're not running F6 BIOS update it
  23. C

    First Build

    how do you mod an AC Freezer 7" like crazy"?
  24. C

    What are good Mobos and Ram for the E6400

    If you're not overclocking you should just look for value, you won't see too much difference b/t mobos and RAM at stock speeds.
  25. C

    power supply question

    It'll be fine
  26. C

    Why does my new PC randomly reboot after a while?

    did you test your PSU under load? Is your system OCed? Is it overheating? More details... RAM, HSF, temp readings
  27. C

    Which cpu/mobo/memory combo would be better?

    That's only with Micron D9 RAM, which the Buffalo has but that particular G.Skill does not
  28. C

    Cheap Ram and OCing

    Just a quick post about my OCing results using the G.Skill F2-6400CL5D-2GBNQ RAM (red heat spreaders). Maybe others can add their OCing experience with other inexpensive sets.... This Ram has been one of the the cheapest sets of 2GB DDR2 800 on the market for a while. Running my e6300 on...
  29. C

    Dual Core 6300 or 6400

    Yeah, but dude I've got my e6300 clocked to 3.29ghz!!!!! If you're doing serious number crunching it might be worth the extra $60, but it's hard to say b/c to some people $60 is nothing. What are you going to be doing with it?
  30. C

    drivers for sata drive when installing windows

    Also, depending on your mobo, you can set SATA to native in your BIOS. I was able to do that on my 965P-S3 and didn't have to mess around with adding the 3rd party driver
  31. C

    E6600 reapplied on a new S3 mobo...temps down OC way up

    I just updated to F6, I seem to be stable at the moment at 475 FSB with my e6300 now, I was having trouble getting stable past 450 with F5... strangely with +.4 & .5 vDimm I was crashing in super pi, lowered it to +.3v and it's making it through...
  32. C

    E6600 reapplied on a new S3 mobo...temps down OC way up

    What BIOS are you using on the S3?
  33. C

    What PS?

    The Thermaltake would be fine... check out Jonnyguru's review of the 750W version... http://www.jonnyguru.com/review_details.php?id=17 The toughpower series is solid. Or.... http://www.newegg.com/Product/Product.asp?Item=N82E16817342009 Topower is an OEM manufacturer for lots of other PSUs
  34. C

    Ready to order rig, need help

    The Buffalo Ram is good and should OC farther tha other suggestions as it uses Micron D9 chips, though I'm using that G.Skill and it's fine. I would definitely NOT buy the Rosewill PSU, the higher end Xclio's are pretty good (Same as the TT Toughpowers) but I don't know about that one, with the...
  35. C

    Ready to order rig, need help

    your links don't work (page not found)
  36. C

    New Rig - Suggestions?

    why not live with the onboard sound for a while and see if you find it satisfactory, you can always add a sound card later...
  37. C

    Interesting Core Temp findings

    I'm running an e6300, currently clocked at 3.15Ghz, I had been concerned that my temps were a bit on the high side, though certainly not in the danger zone. Intel TAT had been showing core temps in the high 40's at idle and up into the mid 50's under moderate use. I was a bit worried that...
  38. C

    Could You Check Out My Build?

    I'd wait on getting the sound card, by all accounts the sound on the P5B is very good... I'd live with the onboard audio for a while and if you're not happy with it then you can easily add the Xi-Fi... There have been some good HSFs in the open box section of Newegg lately, see what's...
  39. C

    PSU Blew!

    That OCZ would probably be fine... the Fortron would be okay too, but that model's a bit low on amps
  40. C

    Prime95 Failure = What is causing the problem?

    Failing Prime 95 even without OCing means somethings wrong. Could simply be a problem with your cooling system (improperly seated HSF, inadequate HSF, ambient temps too high, etc.) or it could indicate problems with your CPU or RAM... I'm sure somebody who knows a bit more about the details...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |