Search results

  1. S

    Video card blown MOSFET indicator

    If it burnt out due to high temperature and without a heatsink?
  2. S

    Video card blown MOSFET indicator

    Hi all, so if one or multiple power MOSFETs fail on a video card, what happens? Just the power delivery is crappier or the whole video card stops? Thanks in advance :)
  3. S

    MOBO support for PENRYN

    hi all, Just wondering, if a motherboard supports FSB1333 like E6550 Core 2 processors, would the motherboard automatically support penryn processors? I have BIOSTAR 965PT which I really really love and don't really wanna let go. The bios update to support FSB1333 was not from BIOSTAR...
  4. S

    WD RAID EDITION or Seagate 7200.10

    Hi all, Just wondering, which of the two harddrives should I buy for RAID 0? I mean obviously 320GB 7200.10 is faster than WD3200YS but since I'm gonna be running RAID maybe getting WD is better for safety? Thanks in advance :)
  5. S

    680i Chipset HEATSINK temperature

    Ah ok... do you have active cooling on your SPP?
  6. S

    680i Chipset HEATSINK temperature

    Hi guys, I have in9 32x mobo but they don't come with 680i spp temperature meter like evga ones do. So I've been measuring my heatsink temperature with a probe. The thing is, northbridge never goes over 38 degrees and southbridge never goes over 36 degrees. I've overclocked to 472fsb and...
  7. S

    E6550 Not very popular?

    Well in the memtest 1.7, when running async: Bandwidth ~= 4400MB/s When running sync Bandwidth ~=5000MB/s Running 950mhz at 4-4-4-8 2T
  8. S

    FBad e6550 chip?

    Hm.. maybe you are hitting the cpu FSB wall? so 451 = POST and 452 = No Post? Then definitely CPU fsb wall.. had that once with my pentium E2140. I actually have E6550 and running at 475 FSB... 451 seems pretty low for 1333FSB cpu
  9. S

    MEMTEST 1.7 Question

    Hi, thanks for the reply. I know EXACTLY what you mean BenchZowner... This happend when I had OCZ 2gb DDR500 3-3-2-8 Enhanced Bandwidth (one of the best, IF not the best DDR1 2GB kit).. Runs totally fine when running 250mhz but anything over 250mhz like at 260 passes memtest flawlessely but...
  10. S

    MEMTEST 1.7 Question

    Ah, ok thanks alot!
  11. S

    MEMTEST 1.7 Question

    Hi all, Just wondering, which test out of all 10 tests in memtest 1.7 stresses the memory the most? Think last two is not included in the normal test routine. Hm.. if that's the case then out of 8 tests? Thanks in advance :)
  12. S

    Abit In9 32X-MAX 680i chipset temperature monitoring???

    Bump.. Anyone?
  13. S

    Abit In9 32X-MAX 680i chipset temperature monitoring???

    Hi, thanks for the reply. Oh so there is no way of checking the chipset temperature? Man this is not good! So how does everybody else check to see if the heatsink is placed properly or the temperature is ok when overclocking? I dunno but everyones been saying 680i runs really really hot but...
  14. S

    Abit In9 32X-MAX 680i chipset temperature monitoring???

    Hi all, Anybody who has abit in9 32x, what do you guys use for chipset temperature monitoring?? There is no temperature display for the chipsets in the BIOS, only voltage is monitored. uGuru doesn't say anything about the chipset temperatures either! What is going on???? Regards...
  15. S

    DOES 680i motherboard's max FSB change with different ram speeds?

    Hi all, I was just wondering, does the max fsb change if you run linked 1:1 (or linked & sync'ed) instead of running ram through a divider (unlinked)? I'm currently running in9 32x max mobo at 460FSB running E6550 at 3220Mhz but running crappy generic PQI 5-5-5-18 DDR2 800mhz ram orthos...
  16. S

    Anyone use this for stability testing for your OC

    It's good for quick overclock stress test. Whenever I overclock I use this program to get to the right point of overclock and use SP2004 to fine-tune. This program shouldn't be used to determine full stability though as passing 30min test doesn't mean it's gonna pass 8 hour full stability...
  17. S

    DELL E1505 Inspiron 6400 support NEW Core 2 DUO MOBILEs with 800mhz FSB??

    Anyone? Bump...
  18. S

    Using 1T vs 2T command rate for RAM..

    SiSoftware Sandra
  19. S

    Shut down vs. sleep

    Hi, correct me if i'm wrong, but seems like the sleep state you set in the bios seems like S1 instead of S3. When you say the fan lights are on as well, well I guess that means the whole computer is practically on. This is the case if you set sleep mode as S1. If you set to S3, the computer...
  20. S

    Fans for the hard drives

    Well I guess it's always safe to have a fan or passive cooling for your harddrive. In my case, I have 5 harddrives and 2 of them are in RAID 0 so got cooling for them rightaway since I don't wanna risk of loosing all of them due to high temp (and they did get really hot.. just like you said hot...
  21. S

    Should my stock AMD 64 3200+ fan be doing this?

    Hi, if you goto PC health status or somewhere in the BIOS, you can change the temperature the fan runs at highest, medium, lowest and stop. It's got nothing to do with Cool and quiet or any kind of software installed. This fan control is done by BIOS. Also there is no sensor or whatever...
  22. S

    DELL E1505 Inspiron 6400 support NEW Core 2 DUO MOBILEs with 800mhz FSB??

    Hi guys, Just wondering, do any of you know whether my Dell e1505 will support new upcoming core 2 duos that runs on 800mhz FSB? Also, I do run linux on vmware, do you think it's worth upgrading my T5500 to T5600 or some other core 2 processor that has Virtualization Technology? I can't...
  23. S

    ANYBODY HERE KNOW ABOUT VF31 TURBO???

    Ah, tried but they don't know either.. they do know about other VF series turbos but not VF31 in particular :(
  24. S

    ANYBODY HERE KNOW ABOUT VF31 TURBO???

    Hi guys, I jus wanted to know the specs for VF31 turbo so I can find a replacement for it. Was thinking of getting TD04 but I don't think the specs are similar at all. VF31 is supposed to fully spool up by 2000~2500 rpm. My car is 2000 Subaru Legacy B4 twin turbo.. its the smaller of...
  25. S

    CAUSE OF INTAKE PRESSURE DROP??

    Hm.. what causes intake manifold pressure drop? When I press accelerator at about 4~5000 rpm, the turbo stalls for some reason then starts spooling up again gaining boost after 1~2 seconds of pressing down on the accelerator.. I can tell cause normally I can hear air wooshing through my intake...
  26. S

    What's the largest hard drive a Pentium 3 (socket 370) can support?

    FAT16 is even worse... 2GB :( but back in the days where harddrive space from 250MB to 850MB was big enough FAT16 was fine :)
  27. S

    What's the largest hard drive a Pentium 3 (socket 370) can support?

    It depends on the file system not the chipset.. so if you format your harddrive as NTFS not FAT32 should be ok whether you have old chipset or newest chipset. If the harddrive is not recognised, then either jumper setting is wrong, there is something wrong with the cable or the harddrive is...
  28. S

    Best Bluetooth Stereo Headset?

    I'd say HT 820 from motorola... even if your phone does not support A2DP :)
  29. S

    power supply setting

    Depends on which country you living in?
  30. S

    High Pitched Noise from Motherboard

    Could be caps or coil on the mobo... is the noise constant or varies in amplitude and frequency? Noise variance depends on what you are doing? I came across hardwares that when you actually do something like access harddrives or do something cpu/ram intensive and the noise is produced...
  31. S

    Just pulled the trigger

    NOICE :)
  32. S

    How to set up Power Management

    Hm.. I'm not so sure if this is what you are after.. but from what I can remember if you disable ACPI from the bios then install windows then enable, OS won't boot. You either have it on or off before fresh installation of Windows. You have to have ACPI enabled to have S3 (lol I think...
  33. S

    Partitioned harddrive....Decreased performance?

    Well the answer to your question depends on what kind of performance you are talking about. In terms of copying files between the partitions, it would have massive decrease in performance but in terms of loading games etc, it shouldn't. As long as you are not using 2 partitions at once, there...
  34. S

    Can anyone tell me whats going on with my PC?

    Hm.. usually long beep without anything on the screen means the ram is not pushed into the slot properly or there are no ram modules in the slot. Did you make sure the rams are pushed in properly? You said you took out the ram module, just try putting one module in properly.
  35. S

    Upgrade options for a friend

    Another important question.... how much is the shop selling the geforce 4 for? Some of the shops charge like over $100 for geforce 4 ti which is totally ridiculous
  36. S

    Built my first PC finally

    LOL congrats! Man that reminds me of the time when I first started building my rig... buying part by part by week by week... the joy I felt when I finished it (and was working fine!) is indescribable! :)
  37. S

    Making an internal hdd work "outside"?

    The answer would be NO as HTPC mobo chipset and laptop chipset will be different. Unless you have exactly the same laptop mobo in your HTPC, you will have to reinstall everything once you get all of your HTPC parts. What you can do is put movies first, then install windows after you got all...
  38. S

    4GB CF card only works as 2GB

    Have you tried third party software such as Partition magic?
  39. S

    Pictures of your computer's inside?

  40. S

    Pictures of your computer's inside?

    haha yer, seemed like the best solution at the time :)
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |