Search results

  1. A

    P5N-E Issues.

    What is it, 1 gig, 2X512????????
  2. A

    P5N-E Issues.

    I have had zero problems with the DDR2 800 I got from A-DATA
  3. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    It is not uncommon for your NIC to continuously flash. Your NIC will constantly poll the switch as long as there is a link.
  4. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Before you install all of your programs again, Disconnect the IDE drive, reinstall XP, reconnect the IDE drive. Your drive letters will be right again.
  5. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Yes, I would suggest setting your Vcore to auto and jumping to 1600 or 1700. I was stable after I hit 1600. From that point on I increases my FSB by 50 each time. I've only stopped at 1800 because I want a very stable gaming system. I have been windows stable(able to boot into windows and mess...
  6. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Haven't been on for a couple days and just saw your post. My fsb is set at 1800/Mem is at 800. Going to start working the memory in a couple days.
  7. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Check out this link for the proper install of the Arctic Freezer Pro 7 http://www.arctic-cooling.com/cpu2.php?idx=79&disc
  8. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    OK, another question, when I put the Vcore on Auto it jumps the voltage all the way up to 1.49. This seems high, and raises my temps from 42 degrees idle to 47 degrees idle. Is that to high?
  9. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I just tried 1800/800 and was getting intermittent BSOD. I have my Vcore set at 1.41 (whatever is closest to that) CPU-z and speedfan show it at 1.39. Should I bump it up?
  10. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I'm using the SB Audigy 4 and having no issues here
  11. A

    P5N-E Issues.

    No problem using a jump drive. Let us know how it went.
  12. A

    P5N-E Issues.

    SilentBob66, I see two things that can cause some of your pain. 1st you flashed the BIOS in windows, that can cause a lot of problems; 2nd you did not clear the CMOS after you flashed the BIOS. What version of XP are you trying to install? If its anything less than SP2, that can cause...
  13. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    John (Core2) Question, What direction does the fan on your Arctic Freezer Pro face? On my way out the door for work, will check back later. Thanks
  14. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    What a game, I'm glad Manning got a super bowl ring. Now the press can quit hounding him!!! (HUGE STEELERS FAN Here) Damn, miss a couple days of this thread will cost you an hour reading. This thing is moving fast. Just looked at the page 92 Tips and Basic OCing. Great job John and all that...
  15. A

    P5N-E Issues.

    I use this cooler on my NB http://www.newegg.com/product/product.asp?item=N82E16835116018 And this HS on my SB http://www.newegg.com/Product/Product.asp?Item=N82E16835118002 I did a little OCing before I installed those. My signature is now correct. I've been stable at 2.9GHz for a...
  16. A

    P5N-E Issues.

    Two things, there are a lot of memory holes in the 0202 BIOS and never (I mean NEVER) update the BIOS in windows. This board has a BIOS updater in the BIOS itself. Use that. Everyone that updated the the BIOS in windows hosed their system. AND MAKE SURE THAT YOU DO A HARD RESET(UNPLUG THE...
  17. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I'm going to let it run on this for a couple days. I just got a new case (better cooling case) and am waiting for some different 120 MM fans for the front and rear. Will be moving this PC into the new case on Friday afternoon. Once I have that up and running, I'm going to push it harder. I'd...
  18. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Just a shot in the dark, try setting the HDD Smart Monitoring to "DISABLE" and then run setup. If that was the only thing you changed, I would change it back and see what happens
  19. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    2 1/2 hours on orthos with no errors. I have this on the NB http://www.newegg.com/Product/Product.asp?Item=N82E16835116018 and this on thSB http://www.newegg.com/Product/Product.asp?Item=N82E16835118002
  20. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Try 1700/800 vcore 1.3875 NB 1.39 or 1.56 and just keep upping the vcore a little till your stable Edit: Did you Clear the Cmos when you flashed the bios Thanks, I'll give that a shot. Yep, cleared the CMOS after BIOS flash
  21. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    those temps look fine to me. can you increase the fsb now? also with the 7x multi i know there are some fsb problem areas that have been addressed in previous posts (90 pages doht) i can't remember what they are off the top of my head. you may be looking at getting to a point where the NB...
  22. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    OK, I put the vcore to 1.33. changed the FSB/mem to 1550/800 and it crashed, couldn't get to windows. So I got impatient and thought maybe there was a hole around 1500, so I jumped it top 1600/800 and it wouldn't even allow me to get to the BIOS. I had to reset the CMOS. I cleard that and am...
  23. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I seem to be stuck at 1525/800 unlinked. Ican get to the windows start screen and then it locks http://valid.x86-secret.com/show_oc?id=162678 Screen shot http://usera.imagecave.com/bear254/2668IDLE.JPG Any ideas
  24. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Thanks, that helped out a lot. I used you sugestion and it worked beautifully.
  25. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Can anyone tell me or find out what the manufacture recommended setting are for this RAM. http://www.newegg.com/product/product.asp?item=N82E16820211064 I know its not the best, but I was (am) on a tight budget, had to get what I could get. Anyway, thanks for any help
  26. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    The NB HSF is hot right now, I can touch it but only for a few minutes. (but I just got home and I had ran an orthos test for 2 hours 31 minutes) I checked all the pins on the freezer pro7 and they are set good. I did take the MX-1 off before, but I bought some more and reapplied it yesterday...
  27. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Couple of questions here 1) My temps seem to be a little high, http://usera.imagecave.com/bear254/2.6IDLE.JPG . Is this with in the recommended temp range or am I to hot? I have a 120mm fan bringing in air from the front, an 80mm fan blowing in from the side and a 120mm pushing air out the...
  28. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    They are on Auto, I'll change them tonight when I get home. Thanks
  29. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Has anyone run into issues like this. Total Vcore voltage drop or an over voltage of .5 Here is a screenshot of what I'm talking about. It's the probe II log. http://usera.imagecave.com/bear254/ASUSProbealerts.JPG
  30. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Looks like I'll to change mine and see what happens.
  31. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I have my DIMMS in both black slots and CPU-Z shows it in dual channel. http://valid.x86-secret.com/show_oc.php?id=159114 Now I'm not saying thats right, just showing what I see
  32. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I'll give it a shot later, after I finish all my honey-dos.
  33. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Yea, I took it off. I was having trouble with he board when I first built it. Thought it was a processor problem, so I had taken the freezer pro off. When I put it back on I used AS 5. Turned out I can only run my ram in the black slots. I tried putting them in the yellow slots again...
  34. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Update; Dropped the FSB to 1450/800. Runs stable. Ran Orthos for well over an hour with 0errors and 0 warnings. Both cores ran at 54C under a full load. I do have a question on voltages,Both SpeedFan and Probe II show a Vcore voltage drop under load. Idle @ 1.31 Load @ 1.264 Is this normal?
  35. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Well, I came back from lunch and the PC had locked up. Restarted it and ran orthos again and it lasted 18 minutes before it froze again. Restarted again and it wouldn't finish loading windows. Dropping it back down a half a click to 1450/800 to see what happens.
  36. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Cool, Thanks I'll update later when I push it further
  37. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    I've worked it up to 2625 (375.1 X 7) and seems stable ( I have only changed the FSB, everything else is still stock). The temperatures have gone up a little. I have run Orthos a couple times after I increased the FSB and it runs with no errors. One thing I did notice is the core temps on my...
  38. A

    The Unofficial ASUS P5N-E SLI 650i Board Thread

    Ok, thanks, I think I starting to get the gist of this, sorry for being a total noob. Thanks for helping out. That took it to 2.1GHz
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |