Ok, finally had a chance to fiddle with OCing a bit more and now have 2 x 1G G.skill modules that play the game..
So I've gone back to an 8x multiplier @ 420mhz fsb to get 3360 Orthos stable 15.297 Super Pi 1M...all with voltage set to auto....
vcore seems to be 1.213v according to CPU-Z...
I wonder if anyone saw this...
http://www.legionhardware.com/document.php?id=625&p=0
Jumping straight to 1750 fsb with a E6400 to get 3.5G without ANY voltage adjustments.
The only comment regarding stability says that it seems very stable....
Anyone like to comment on that....given my...
quote from nefariouscaine
was the ram stable at auto detect settings at stock volts or did you change it to 4-4-4-12 right off the bat?
Nah the iffy module wouldn't post even with 5,5,5,15....needed 2.085v to boot...it was only after I raised the volts and loaded winXP that I upped the...
Ok finally got around to testing my memory...2G of G.Skill HZ...
I've flashed the bios to 0401 from 0202 but I have one mem module that won't boot at stock volts...sooo boot with the other one, change volts to 2.085 put in other module boot from memtest 1.70 cd and lots of errors about 100 in 4...
Hi everyone....
I'm sure this is old news but for those not sure about speedfan and just want to monitor volts and temps...our good friends at CPUID have PC wizard 2007 with support for the NV650 chipset....the temps are all labelled correctly so no need to change them....and there is enough...
Thanks Core2....I'll leave it stock for a while to allow a bit of burn in before I move to O/cing. ..and I need to fit a fan to the NB and HS to the SB but wanted to get some mileage on the board before resorting to thermal epoxy for the SB sink.
I may even try to use it at a LAN party on the...
So I gather I shouldn't be worried that one of these modules had problems posting till I bumped the volts....? Can they still be considered to matched if one needs fewer volts than the other? I really don't want to take them back but they were pretty expensive....
Hi guys,
Haven't posted for a few weeks as I have been assembling all the required parts and I also had to put together a PC for a mate of mine (plain AM2 on an ASUS NF4 SLI board with an X@ 4200)....anyway, heres what I ended up with and then a question....
ASUS P5N-E SLI (obviously)
C2D...
.....Sorry to repost this question...has anyone installed the Thermaltake Big typhoon VX (cpu HSF)....any problems with clearance, noise etc?
Core2....that ChillTEC thing looks awesome...doubt if it would fit in my new case though as the 22cm fan in the side panel would probably foul...
Sorry managed to put this in the top level forum....maybe a moderator can delete the other one.....
Ok so I've got the board, the CPU (E6600), ram (G.Skill PC6400HZ...D9s hopefully) ...and wanted to put a Scythe Ninja on it to be sure it was Cool and Quiet...excuse the pun....can't get the...
Whoops put this in the wrong thread....meant to be in the P5N-E thread...sorry
Ok so I've got the board, the CPU (E6600), ram (G.Skill PC6400HZ...D9s hopefully) ...and wanted to put a Scythe Ninja on it to be sure it was Cool and Quiet...excuse the pun....can't get the Ninja locally...so...
Thanks...Core2...wel I could have got the G-Skill, Geil and Corsair C4 ram today but decided to wait to see what the members and yourself came back with....Have you heard of PQI or Patriot ram in the States? They're supposedly ok over here...maybe I'll just bite the bullet and get the...
Hi all,
I too am new to this board and forum....sorry Core2 for picking the same avatar and in truth I probably have more hair than it but it is certainly very grey these days....
Anyway my eyes are hanging out of my head from reading a good proportion of this thread and am going out to start...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.