Search results

  1. S

    Tuniq Tower installation question

    Its hard to tell unless you take the fan out and watch it. I found I couldn't feel the direction. If you Google this topic, there are a few opinions out there that say that the hear flowing up and out is better. I have monitored mine both ways and the difference for mine is negligible.
  2. S

    Video card and esata upside down?

    Yea, its ur typical noob question. New build for a friend, got a new GTS with cool graphics on it that is upside down? I am using the Coolermaster CM 690. The esata is upside down too. My Centurion 5 is the same way. Was looking at a Stacker, it is the same. Heres the question: Is...
  3. S

    New Motherboard: Vista 5.3 w/Gskill Hz.

    Could use some help, I am building a computer for my daughter and decided to give her vista for the future, and media center. I installed 2 gigs of GSkill Hz, (6400 Cas4) and went into the Bios to change the latency to 4-4-4-12. I could not find the Ram voltage, (MIT using control F1), and...
  4. S

    Cooler that my daughter can handle?

    Decided to use the Coolermaster Hyper TX I have sitting here. It weighs in at 482 grams, which exceeds Intel specs by 32 grams. I am going to put a back plate on it, and mark the box THIS WAY UP and hope for the best. If you read this and have experience in this matter, I am shipping...
  5. S

    Gaming headphones

    Newegg had the Sennheisers 280s for 70 dollars free shipping. Promo code. Sign up for their newsletter. I have had a couple pairs of Sennheisers. You cannot go wrong with them good luck
  6. S

    Cooler that my daughter can handle?

    Thanks guys, am still looking. Off to check the Scythe.
  7. S

    Cooler that my daughter can handle?

    Hi guys, Giving my comp to my daughter and fixing it up for htpc as well. Dont think I want to give her the Tuniq. I might, but I have to ship her this one. Would appreciated your thoughts on this, and also, If you think that a better application is warranted. New setup:Coolermaster...
  8. S

    P35 MB: Gigabyte P35-DS4 or ASUS P5K-E/WiFi?

    I think the Gigabyte DS4 Rev. 2 does have esata Noels.
  9. S

    Abit IP35 Pro vs Gigabyte P35-DS4 ?

    I am considering both right now as well. If DTS is a concern of your, your might want to read on it. I am building one for my daughter, and she likes movies and music. Anyone know how well the Tuniq fits on the DS4?
  10. S

    Cooler Master CM 690 ATX Case + Free 3.5" Card Reader - $29.99 AR + Free Shipping

    Thanks OP Been looking for a good case for my daughter, and she will probably use the card reader. The reviews at Newegg are better than the Stacker! Happy Holidays amigo.
  11. S

    Finally have the newest 'dream' rig ready to order...

    The 320GB drive will be on sale for $59 on Black Friday at Best Buy. Can't beat that for for the $. U SURE?
  12. S

    Alarm?...temps ok?

    False Alarm? I fixed it like this. I overclocked it some more: 3.2 now. Weird thing is, it is running cooler. Shouldnt it run hotter if I up the Bus?
  13. S

    Alarm?...temps ok?

    I was gaming with coretemp and speedfan running in the background and an alarm from my case went off. I minimized the game and checked my temps...they were in the 40s. I went through and checked the BIOS for alarm settings, and it appears ok. I have run Orthos for an hour (not overnight) but...
  14. S

    Abit IP35-E Review (500MHz FSB board)...$90 @ NewEgg + $6.61 ship

    I am running a Corsair as well. No problems. Might want to read into it more.
  15. S

    * IT IS ALIVE * HP LaserJet 1018 Printer now $19.99 or $9.99 AR w/ Free Shipping @ buy.com.

    sorry if I am missing this.... the rebate is no longer valid?
  16. S

    What do you guys think of G.SKILL memory?

    I am running 2GB Hz at 999Mhz.
  17. S

    Huzzah! Super Talent DDR2-800 2GB (2x1GB) ---- $36.00 + ship ----

    I dont know about anyone else, but I am damn tired of seeing.... WOW
  18. S

    I could use some advice...

    Hey....those squirrels are trained!
  19. S

    Abit IP35-E Review (500MHz FSB board)...$90 @ NewEgg + $6.61 ship

    Hey fellas, Was looking throug BIOS for changing keyboard from OS to BIOS. Could not find it. Could you help me out?
  20. S

    Overclocking Results for E4300 + GSkill PC2-6400 2x1GB DDR2 Micron D9 chips

    Banik, I have the same ram and ended up at the same timings on it. Stuck at 2250 until I relaxed the timings. which divider did you use?
  21. S

    Abit IP35-E Review (500MHz FSB board)...$90 @ NewEgg + $6.61 ship

    Serpent, "load Optimized Default". that did it. at 333 right now stable. Thanks!
  22. S

    E4300 and Asus P5N-E Sli ...what am I doing wrong?

    Msi, I am stuck at 2250 as well. New to overclocking, looking for help. How do I check the temps of my Northbridge and Southbridge? My temps otherwise seem to be fine, but I am not sure about my ram. I have it set at 1:1. It says 250 Mhz in CPU-Z. Learning. Thanks for your post.
  23. S

    Abit IP35-E Review (500MHz FSB board)...$90 @ NewEgg + $6.61 ship

    Serpent, Question. When I look at CPU-Z memory is says 250 MHZ. I have it set to 1:1 on the memory divider. Is this because of the Speedstep? It is running slower to save energy? Thanks in advance.
  24. S

    speedfan vs coretemp temps?

    I just downloaded the beta, gave me errors, wouldnt run. Some threads on it on ABITS site, about how it is off. ARGH!
  25. S

    speedfan vs coretemp temps?

    Thanks guys. Rev 11. CPU 39C SYS 33C PWM 47C BIOS readings Coretemp: 43 & 44C Speedfan: SYSTEM 32C CPU 30C AUX 43C HDO 35C TEMP1 31C CORE0(?) 28C CORE1 28C CORE 51C (RED FLAME NEXT TO IT?) Any tips appreciated. I'm going to get into the readme on Speedfan...
  26. S

    speedfan vs coretemp temps?

    Speedfan vs. coretemp. Anyone know which one is right? Speedfan: 33C Coretemp:45C ???
  27. S

    Abit IP35-E Review (500MHz FSB board)...$90 @ NewEgg + $6.61 ship

    Hello Serpent, Been trying to get past 2400, failed a couple of times, and I decided to check BIOS Version. CPUZ says version 6. Time to learn how to flash BIOS? My question is this: 11 or 12? Any safe way to flash BIOS without a floppy?
  28. S

    How to guide: Memtest86+, Prime95, and SP2004

    Could someone clue me in on how to actually run Memtest? Do I DL it to a floppy and boot to floppy? Dont have one. Other options?
  29. S

    Recommend me a budget Computer

    Heres an option, Go to Best Buy and get the NSK with 380W power supply for 28.00 2140 Dual core: 72.00. http://www.directron.com/bx80557e2140.html ABIT Motherboard: 71.00AR http://www.mwave.com/mwave/sku...9&CartID=done&nextloc= 2GB 667: 20.00AR...
  30. S

    Abit IP35-E Review (500MHz FSB board)...$90 @ NewEgg + $6.61 ship

    Hello Serpent, I changed my memory divider, and it reads 204.0 Mhz on Cpuz. Is this correct? Also, the cpu reads the same FSB. Is this correct?
  31. S

    Should I replace the Tuniq Tower fan?

    its noisy as hell at full tilt
  32. S

    Abit IP35-E Review (500MHz FSB board)...$90 @ NewEgg + $6.61 ship

    Originally posted by: SantaAna Thanks Serpent, getting my ducks lined up. are any of these shareware: 4. Install OS. No need to hit F6 to load special drivers. Upon completion, load Intel chipset, sound, and LAN drivers from CD. Make an image file of this partition if you have DriveImage...
  33. S

    Abit IP35-E Review (500MHz FSB board)...$90 @ NewEgg + $6.61 ship

    Thanks Serpent, getting my ducks lined up. are any of these shareware: 4. Install OS. No need to hit F6 to load special drivers. Upon completion, load Intel chipset, sound, and LAN drivers from CD. Make an image file of this partition if you have DriveImage, Ghost, BING, or TI for...
  34. S

    6400 work in 4200 slot?

    yeah, working ok. thanks bro.
  35. S

    IP35-E and TX2

    JJM, if you would, let me know how you like that kit. I just got the same cooler and dont like the push pins. appreciate it.
  36. S

    I have 2GB GSkill PC2-6400 Memory , I want to go to 4GB

    http://www.newegg.com/Product/...x?Item=N82E16820231065 This might work. Works great for me.
  37. S

    6400 work in 4200 slot?

    Broke student with POS ECS motherboard. Do not want to buy 4200 memory, have 6400 stick extra. Can I run the 6400 stick in the 4200 slot, and will it damage it (6400). Thanks!
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |