TriBeCa
Two hours+ of running Orthos and Speedfan v 4.32 reports the following:
CPU 35C
Core 0 45C
Core 1 43C
Mobo 32C
System Drive 28C
Data 1 Drive 29C
Data 2 Drive 29C
Image
NB Case fans on highest level
UPDATE
*******
Time to clock 'n' Roll
Page 92...
As of today I have a Noctua NC-U6 on both my North & South bridges
KG
UPDATE
*******
Taken in isolation, I now realise that this post looks a little weird - I should have quoted the original post which asked for info on cooling used on bridges.
Whilst I'm here - I've left my set-up...
Thanks Zepper
However...
Here in the UK we're used to paying through the nose for gear (PC and camera - but that's another story!!).
Although the item you linked to is well priced, unfortunately shipping appears to be to mainland USA only - no good to me across the pond.
As for...
Thanks Rally Master. I think I need a female Molex connector - but an adaptor for male-female molex is easier to find than what I'm looking for. I'm in the UK so the next hurdle is to see if this can be delivered.
Thanks for your help and lightning fast reply.
If anyone knows where to...
I have a what has turned out to be a "major problem" with my new fan control system.
Firstly my case is the Antec Nine Hundred which has 4 fans (one 20cm!) with normal LP4 connectors.
Rather than having to change fan speeds manually (each fan has a three-way switch) I decided to get an...
If you look at my sig you can see the coolers I have fitted. Would it help if I uploaded photos of the system?
Edit: Just spotted jkcheng122's post. My Arctic Freezer went on with no mods at all - but then again, I had already removed the Asus heatsink from the NB. Had a "dry run" with both...
Starting from the top (with your questions John):
Q fan disabled in bios
Vcore set to auto
NB voltage set to auto
Vdimm set to 2.178 manually (2.2v spec)
CPU fan running at 2586rpm
My case has 3x120mm fans - 2 at the front and 1 exhaust at the back. It also has a 200mm monster in the...
Did you follow the instructions on page 92 for speedfan. You need to replace the speedfan.exe with the speedfan Beta .exe I also posted my config files a few pages back just copy them and paste them into your files. Pressing F1 while in the program brings up a help file. Ask DeadMan3000, he's...
Answered my own question from Almico's FAQs:
Negative voltages are shown incorrectly
Hardware sensor chips are generic devices that can be used to measure voltages from anywhere. The measured voltage must be converted to the range required by the sensor chip. Standard monitoring chips...
Speedfan readings - Should I be worried? (See negative voltages!)
http://www.kevangoddard.com/img/p687549852.jpg
Apologies - zenfolio (my picture hosting site) seems to be down at the moment.
The bottom third of speedfan's screen is split into three and I am seeing some frightening...
Went like a dream.
XP Pro loaded. Now going to configure all the peripherals (once I've eaten the Chinese the wife's just ordered!)
PS Temp 30C
Will keep you posted
Regardz
KG
Thanks ElAguila, Thanks John,
I'm printing page 92 now - leaving this system up and running as a lifeline to you guys (once I've removed the X-Fi Audio Card)
Wish me luck
Cheerz
KG
Well everything has finally arrived. :D
Everything loaded and fitted onto the mobo and the mobo fitted into the case - but apart from the two power connectors I've connected nothing external to the mobo. Why you might ask??
Although I'm no new hand at this - I'm being cautious. THE QUICK...
@ Core2
Hi John (and all)
I came across this thread late last night and spent many hours and became bleary eyed reading up to page 79 - I've skipped a few, apologies for that - hope I haven't missed anything important :o
Why have I joined this thread? I've ordered a bunch of gear which...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.