Search results

T
Need some case modding resources

Thanks Zepper, I really appreciate it. And maybe a fan in the top of my case won't make much difference; but after temperature probing the inside of my case (with it closed of course) I am definitely getting signifigantly higher temps in the central upper part of my case so some exhaust there...
- Tasandmnm
- Post #3
- Apr 26, 2007
- Forum: Cases & Cooling
T
Need some case modding resources

I have a coolermaster centurion case and while it cools adequately I really want to improve upon it. The biggest way I can see to do that since I already have 120mm fans on the rear, side, and front, is to add an exhaust fan to the top of the case. I also want to improve the looks of the case...
- Tasandmnm
- Thread
- Apr 26, 2007
- Replies: 2
- Forum: Cases & Cooling
T
Ways to cool the graphics card

Antec makes a dual fan dumby PCI slot *card* that does a pretty decent job. It has a speed adjustment on the back and it will move a decent amount of air. I have it 2 PCI slots below my 8800 GTS and with it turned to about 50% I see about 2C cooler temps. If I crank it up to 100% I can get...
- Tasandmnm
- Post #3
- Apr 24, 2007
- Forum: Cases & Cooling
T
Where to buy Ultra 120 Extreme??

Thanks a lot ala :)
- Tasandmnm
- Post #3
- Apr 24, 2007
- Forum: Cases & Cooling
T
Where to buy Ultra 120 Extreme??

I went through the entire vendor list on Thermalright's website and nobody has one in stock...arg. Oh and guys...please don't tear me apart wondering why I want an Ultra 120 Extreme like some people did to the other guy, it should be obvious :)
- Tasandmnm
- Thread
- Apr 24, 2007
- Replies: 14
- Forum: Cases & Cooling
T
Scythe Ninja work on an Asus M2N32 SLI Deluxe Wireless?

I was wondering if anyone has had any luck...on the Scythe website it lists it as incompatible due to heatpipe interference.
- Tasandmnm
- Thread
- Apr 18, 2007
- Replies: 0
- Forum: Cases & Cooling
T
My final OC on my 4600+, thanks for the help guys

I have heard conflicting stories regarding the HTT, somewhere I heard that on this board it will be stable up to 1500, and in my admittedly limited experience that seems to be the case. And yes I have been using dual instances of Orthos Prime 95, dual Super Pi, and Memtest to check initial...
- Tasandmnm
- Post #4
- Apr 11, 2007
- Forum: CPUs and Overclocking
T
My final OC on my 4600+, thanks for the help guys

Here it is: 273x11 for 3.003ghz, 4xHT for a 1092 HT link, Vcore@1.3875 with Vcore offset enabled (actually pumping out 1.488v). My memory is running at 858mhz with 4-4-4-12-2T timings and set to DDR667. Temps are staying under 59 C. I was having a hell of a time using a 12x muliplier to...
- Tasandmnm
- Thread
- Apr 11, 2007
- Replies: 3
- Forum: CPUs and Overclocking
T
Tuning overclock on a 4600+ (65w)

OK, I have 2.88ghz stable with a 12x multiplier and a bus speed of 240 and using 1.45 volts, not too bad I guess. My RAM timings are still 5-5-5-18 but RAM is now running at 480mhz (x2) which is a nice overclock, but it will not boot at this speed with the recommended 4-4-4-12 timings and I...
- Tasandmnm
- Post #14
- Apr 9, 2007
- Forum: CPUs and Overclocking
T
Tuning overclock on a 4600+ (65w)

OK, anyone know what this error in Orthos Prime 95 means: 2:FATAL ERROR: Final result was 411FFFE8, expected: 86B106EB. I don't think it is Temp related because my temps were just fine when it happened, it was about 2 mins in and I was running two instances of Prime 95, it will not reproduce...
- Tasandmnm
- Post #12
- Apr 8, 2007
- Forum: CPUs and Overclocking
T
Tuning overclock on a 4600+ (65w)

Thanks for all the great info everyone. I am regretting going with the 65w model now, I was trying to decide which to go with and took some advice from someone on another forum :( On the plus side I tried 10x multiplier and Bus speed of 290 and am stable through 30 mins of Prime95, however...
- Tasandmnm
- Post #11
- Apr 8, 2007
- Forum: CPUs and Overclocking
T
Tuning overclock on a 4600+ (65w)

It is indeed socket AM2, and no I am not using stock CPU cooling. I am using a Zalman 9500, I wish I would have gotten a Scythe Ninja after reading through some forums, unfortunately I based my CPU cooler decision almost solely on Newegg reviewers :( Also, what is the maximum temperature I...
- Tasandmnm
- Post #7
- Apr 8, 2007
- Forum: CPUs and Overclocking
T
Tuning overclock on a 4600+ (65w)

I am using an Asus M2N32 SLI Deluxe board with 2 gigs of Corsair XMS2 memory. I am currently at 2835mhz with a 315 bus speed, 9x multiplier, and a 3x HT. I have CPU voltage set to 1.3875 in the BIOS but I get actual readings of 1.44 volts using Asus PC Probe and CPU-Z, memory voltage is set...
- Tasandmnm
- Thread
- Apr 8, 2007
- Replies: 14
- Forum: CPUs and Overclocking
T
XP 64bit or 32bit?

Thanks for all the input guys, I will definitely be staying with 32 bit :)
- Tasandmnm
- Post #7
- Apr 4, 2007
- Forum: Operating Systems
T
PC took a fall, need some help with data recovery from HD

Thanks for all the help guys, I can't wait to get my new stuff up and running! I feel like a kid on Xmas!
- Tasandmnm
- Post #9
- Apr 3, 2007
- Forum: Computer Building
T
XP 64bit or 32bit?

I am upgrading my PC with a new case, Asus M2N32 SLI Deluxe, AMD X2 4600+, EVGA Geforce 8800 GTS, 2 gigs Corsair XMS, etc etc. I was using XP Pro 32 on ym old P4 PC, should I go with XP 64 or will it really matter? My old PC was destroyed in a 3 foot fall so I do have quite a bit of info on my...
- Tasandmnm
- Thread
- Apr 3, 2007
- Replies: 19
- Forum: Operating Systems
T
PC took a fall, need some help with data recovery from HD

Heh, actually my dogs knocked it off....I probably *could* have played around with it and only replaced one or two parts but I wanted an upgrade (and was way past due anyway) and this one was easy to get by the wife :) Anyway, I am replacing everything, I will only be using my old DVD-RW...
- Tasandmnm
- Post #6
- Apr 3, 2007
- Forum: Computer Building
T
PC took a fall, need some help with data recovery from HD

My hard drive while still in my PC took a 3 foot fall from my desk, the PC fell face first breaking the front of my case. I am not sure what all damage it did as I just decided it was time to upgrade anyway instead of doing too much investigating, but it would not load my OS nor would it even...
- Tasandmnm
- Thread
- Apr 3, 2007
- Replies: 8
- Forum: Computer Building

RESOURCES

Top Bottom