It came down to the Mazda and Ford for me. I ended up with the 2016 Escape Titanium FWD. The deciding factor for me was the Escape had the better radio/nav. I am eargerly awaiting the android auto software upgrade for Sync 3. The gas mileage was a little disapointing, I average about 24mpg...
I worked at a defense contractor a few years ago and when my entire group was tasked with getting a secret clearence I had mine in ~two months. My friend/coworker who had a couple misdemeanors, belonged to a well known MC in his youth, admitted to partaking while visiting Amsterdam and had...
Also the chances of getting a routing loop with just EIGRP and OSPF is pretty low(does anyone still use RIP?), its redistribution between routing protocols that will get you every time.
Having a lot of Alts is good when you get into high level crafting. Read this thread about creating a high level Harbinger Bow and it will give you an idea how it works.
https://www.pathofexile.com/forum/view-thread/1250395
just use non magic gavel's and rock breakers so it only costs 4 to get 20%. If I have extra stacks of scraps and blacksmiths I use them for getting an extra regal or chaos when i sell a set of items to the vendor.
if you google neversink loot filter the first page provides a link to the filter. You just need to cut and paste into a text document in your user\username\my documents\my games\path of exile directory with the .filter extension. Once the file is there the loot filter drop down will appear in...
The Masters are spread out in the towns, when you talk to them there should be a option to invite them to your hideout. When they are in your hideout talk to them and there should be an option to get the crafting table. To place the table edit your hideout. After you have the table you can...
Do it, the daily quests take a few minutes each day and being able to craft an extra stat like resists on to each piece of gear for a few orbs helps with leveling. To create a hideout just talk to any Master in one of the towns. After you have created your hide out you can access it from the...
I dont even bother trying to 4 link stuff manually, invite Vorici to your hideout and keep doing his daily quest until you can just craft them for 5 links.
As someone who used to live in craigs ranch in the mid 2000's I am not really surprised this happened. It was an awesome neighborhood to live in that was actually somewhat diverse, unfortunately some of the problems of living there were frequent break in's and vandalism. My house was broken...
Just set your routers log buffer level to informational. When you think something is wrong ssh in and do sh log. If your router is overheating or the fan is broken there will be a log entry for it.
I would not call Brocades data center switches mediocre. If I had to choose between Brocades VDX fabric switches and Cisco Nexus I would go VDX unless the servers were UCS. They are easier to manage and cost about 30% less.
Actually VMware(not just Vsphere) is a good thing to learn, at the corporate level the network admin and system admin roles are going to start to blend at some point. The start of data center network auto provisioning is already here for adding new servers. One of the goals of SDN in the data...
Keep in mind that the position of what a network engineer does is about to change more than any time that I have seen in my 20 years in this industry. I work closely with Cisco and Brocade and if you are not following the changes that SDN and Openflow are bringing you are going to get...
I used to use vrf's to separate management traffic routing from production. A lot of newer Cisco devices have this built in to the on board management interface. I have also used them to vpn to the early version of Microsoft azure. Every azure site would use the exact same ip addresses for...
I have not tried it in GNS3 but you should be able to configure MPLS just fine. All you need to do is configure vrf's, BGP and LDP to the PE router in your design.
There is no specific process that can be easily put together because there are too many variables. Every application has different requirements when it is put on a load balancer. If you don't have the talent in house you should really get a contractor who does have it. There are a lot of...
I guess i am just getting too used to being in the enterprise. I went 3750 because of its ability to stack for future expansion and yes you can buy the 4948 cheap used but end of software support is less than a year away. With requirements to keep up on security updates this would concern me.
Keep in mind the 4948's are going eol so you might want to go 4948e which unfortunately pushes the price up some. If the 4948e costs too much you can look at the 3750v2 or 3750x models.
What exactly are you looking for here? The easiest way to test fail over is to just power down the active unit during a maintenance window. As for verifying if your units are ready for a test it depends on which version of F5 LTM you are running. With version 11 code you need to make sure...
Im sorry but the Cisco ACE load balancers were trash, and I say were because Cisco has pretty much killed them and for good reason. The only thing they were good for was throughput. The ACE 20's had a nice little hardware bug that could not be patched that would cause them to reboot every 4 to...
Straterra is a terrible drug. I didn't want to use a stimulant so I asked to try it first, it made me violently ill. At first I thought it was just a rare side effect but just about anyone I know who has tried it had similar results. Giving it to kids is even worse since it has shown signs of...
At my last job we had a huge warehouse with a metal mezzanine. We started off Cisco but ended up with Aruba before I left. I personally ended up preferring Aruba over Cisco but Cisco was not terrible. The hardest part about setting up wireless in locations like that is antennae placement and...
good luck, that upgrade is a mess because of the NAT changes. I never did find an easy way to fix the configuration quickly. I ended up writing scripts to remove and recreate the objects in batches. If I had known the mess it would created I would have just rewrote the policy/config from...
I can not recommend more than to take a boot camp after a while of studying for the lab. I found the actual configuration portion easy but that I was just way too slow, and I was the fastest in the class. I was only 70% done when the instructor said time up. My biggest problem with the lab is...
A trunk will come up regardless if the native vlans don't match. CDP will bitch about it and you will basically be bridging the two native vlans together but it will work, all tagged frames should pass fine. He probably means just set your native vlan on the trunk like your other switch.
Someone already said it but get tested for h. pylori. It took 3 dr's before I found someone who knew what he was doing. After a month of antibiotics and zegerid my three years of hell with acid reflux finally started to go away. I can actually drink coffee and tea and not wake up with a sore...
In my experience cisco does not win on features with the ASA, it is all about the price. it has been a while but the last time I looked Checkpoint was significantly more expensive. As for the original posters problem how about just setting up two hsrp groups on the 6500's with different...
HSRP IP SLA tracking does not work very well with ASA's due to how they fail over their ip addresses, there is no real ip on each device to track when a failover occurs. So your best choices would be eigrp on the ASA or BGP multihop to your edge routers if that is possible.
If you are using bgp why do you need to use hsrp? Just use one of bgp's many methods to modify which route has preference. I generally only use hsrp when the downstream device does not have a routing protocol or I am doing wan interface tracking/IP SLA.
1000base-t runs fine over normal cat 5. People really dont get much out of higher rated cables, I just dont see 10g getting pushed down to user any time soon.
http://en.wikipedia.org/wiki/Category_5_cable
actually cisco engineers used to recommend only using a single hsrp group on the old sup2's. Are people still using them? I would have figured they were eol by now.
If you are going to rent a car dont bother with Amtrak, it is just going take up time. I fly to northern California from Texas several times a year, it is usually cheaper for me to fly to San Francisco and rent a car than it is for me to fly straight in to Sacramento but it might be different...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.