Search results

  1. F

    Security Problems with Allowing Wireless Routers

    I never meant for this thread to be another way to get information about how to obtain unauthorized access. I was honestly curious was to what was the reasoning behind decisions such as those, since in previous situations, the network was never set up like this before. Thanks for the warnings...
  2. F

    Security Problems with Allowing Wireless Routers

    A question regarding my other thread which got closed What are some of the problems that come with allowing wireless routers on networks? I understand the need for some kind of tracking and accountability, but can't one login, and association of all traffic to that IP, which would be the...
  3. F

    Share Single Connection from Main Computer

    I'm at a University and they have every client install Cisco NAC agent, and they frown on using routers, so much so that they force you to use the router as an AP. I'd like to have a simple and easy connection to the internet with my other devices (laptop, phone, ipad, etc) without installing...
  4. F

    Share Single Connection from Main Computer

    Hi guys, I'd like to share a network connection after a Windows 7 computer. It would be: Wall -> ethernet -> Main Computer -> ethernet -> Wireless Router -> Other Devices Unless anyone has any suggestions, it absolutely has to be this way due to having to install software on my main computer...
  5. F

    Droid X ROMs, where to start?

    XDA developers. They should have a sub forum for your device.
  6. F

    Internet browsers and RAM usage

    I'm running WIN7, and lately, I've noticed that my RAM usage is through the roof (5GB used of 8GB) when relatively idle. So I check task manager, and realize that my internet browsers (chrome and firefox) are using over 1GB combined of ram by themselves. I keep two tabs open in chrome (GMail...
  7. F

    Fractal Design Define XL - 99.99 shipped @Newegg

    Use promo code EMCYTZT1469 to get $50 off. http://www.newegg.com/Product/Produc...82E16811352017 I have one, and it is a pretty nice minimalistic full tower case. At 100 shipped, its the lowest I've ever seen it, and it comes in lower than the midtower Define R3.
  8. F

    Where can I find a dual scroll wheel mouse?

    Doesn't the MX Revolution have two scroll wheels, but one is next to the thumb?
  9. F

    Private messages

    Yes, I get that message whenever I try to send, in addition to getting it whenever I want to view my PMs. It takes about 20 refreshes just to get into my PM page.
  10. F

    Some RAID and Backup questions

    Hey guys, I am pretty new to RAIDs. Although I have heard of them, I have never used them. However, I'm filling up my 1 TB drive to where I am afraid that a hard drive failure will cause me to lose all my data (nothing mission critical, just lots and lots of personal stuff collected over the...
  11. F

    [SOLVED] After pressing power button, no POST

    Thanks for the replies, but after a while of trial and error, I think have finally figured out the problem. It seems that my RAM is not compatible with my motherboard. After completely removing the motherboard from my case, and taking apart everything, I started out by placing one stick of RAM...
  12. F

    [SOLVED] After pressing power button, no POST

    Hmm I tried resetting CMOS, but same problem occurs. Checked all my cable connections, and they seemed to be secure enough.
  13. F

    [SOLVED] After pressing power button, no POST

    Overview of the problem Computer wont POST. Full description of the problem and symptoms It was working couple of days ago until I decided to switch some cables around. When I press the power button, the system turns on, and the fans are spinning, but no beep or POST, and it basically...
  14. F

    Bad Wireless performance on Asus EEE box

    OSX does not allow you to install it onto non apple hardware, so you cannot do it legally.
  15. F

    IPod Classic Is Dying?

    If you plug the Ipod back into your computer, does it work?
  16. F

    dead LCD?

    Yep, tried both VGA and DVI connections on 3 different computers. All nothing.
  17. F

    dead LCD?

    Hey guys, I have an Acer 1917, and recently, the entire screen turned black. Not the black that LCD screens have when they show a black colored desktop, but the black as if it was turned off. However, the power light stays at a constant green, but no buttons on it respond if I press them. Is...
  18. F

    ipod/usb driver problems

    I upgraded to Windows Vista, and I tried connecting my ipod to my computer, but nothing happens. When i go into device manager, the ipod is a "?" and when I try to update drivers, I get Windows encountered a problem installing the driver software for your device Windows found driver...
  19. F

    What's a good file recovery program?

    file scavenger, but it costs $$
  20. F

    two 10-day guest pass keys to WoW

    can't you get a free 10 day trial from the WoW website?
  21. F

    Sound won't work. With a twist.

    I'm having the exact same problem as you, and I'm wondering if you have any updates/solutions to your problem. I'm trying to help a friend, and I'm not sure where to go from here. Any suggestions? O yes, and best of luck to your endeavor.
  22. F

    Ethernet card acting strange

    So is the ethernet port build into the motherboard? And what motherboard is it?
  23. F

    Ethernet card acting strange

    Try entering a manual IP address and see if that works, and how exactly did you "uninstall" the card? Was it a physical removal or did you get rid of the drivers?
  24. F

    Vista and new "Unpartitioned" drive?

    You could try using a recovery program and then format the drive after you got everything off
  25. F

    No Permissions

    have you looked here? http://support.microsoft.com/kb/308418
  26. F

    replacing DVD-RW motor from old CD-ROM

    So I did take dkozloski's advice and go for it anyways, and i found that yes, I believe it COULD work because the connection between the motor and the board is the same, but the holes for my motor didnt match up, so the motor would have been off center. I'll just get a new drive. But, if the...
  27. F

    **SOLVED** WinXP SP Login

    Hmm... when you do get into safe mode, can you do anything with accounts such as change them or try to create a new one? If you can, try creating a new account and see if you can log in from that account. Otherwise, I think you may have some corrupted file or a confilct between some programs
  28. F

    **SOLVED** WinXP SP Login

    Try hitting CTRL-ALT-DEL-DEL and see if a log-in windows appears. If it does, I guess you could log in that way, otherwise, I have no idea.
  29. F

    replacing DVD-RW motor from old CD-ROM

    Well...I know that the reading heads are different, but can the motor be that different?
  30. F

    Recover partition space

    GParted Live CD
  31. F

    replacing DVD-RW motor from old CD-ROM

    I broke the motor or my DVD-RW yesterday and since I have a spare CD-ROM drive laying around, i was wondering if it is possible to replace the motor that spins the CD/DVD in the drive. Is there any difference in the motors used, and given the CD-ROM is aobut 8 years old?
  32. F

    Major Computer Issues

    Try installing FileScavenger to retrieve your files, if you didnt touch your hard drives, the data should still be on there For the problem with your hard drives, give the old setup of your computer and what you did just before it started dying.
  33. F

    Random Reboots... Help?

    I have an epox 9npa+ ultra and I also have random reboots. However, I did determine that it was mostly based on the motherboard, as when I go into POST (right after the random reboots), I get obviously wrong temperature readings (300F) and the voltages that are given vary from program to...
  34. F

    boot lockup on an hp

    Ok, I'm not currently at a place to give exact numbers, but the HP is a pavilion a520n with windows XP SP2, desktop, Samsung spinpoint, not sure the exact model number, but i believe it's 7200 RPM 160 GB, internal PATA yes, I plugged in the drive when Windows was loading, and I know it's...
  35. F

    boot lockup on an hp

    I have an HP and I just added a new hard drive to the machine. However, after adding the new hard drive, when POSTing, the screen locks up when it has reached the newly installed hard drive. When I disconnect the new hard drive, it works fine, and the hard drive works fine on other computers...
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |