Search results

  1. I

    900 MHz Wireless link, Need Opinions on My Setup

    I see when going down in Dbi in antenna's that the beam width seems to widen (yagi style), is there a certain width that I should be aiming for here (bit of a pun their!)... I figure the wider, the less energy I have in that direction. However if wider I would think a bit of wavering on each...
  2. I

    900 MHz Wireless link, Need Opinions on My Setup

    This seems about right but I would be a bit lower. I can't guarantee the elevation on Google Earth to when it was taken as Marlon's house was built only a couple of years ago and when built they added roughly 8' of dirt to his location prior to the house being built, and you can definitely tell...
  3. I

    900 MHz Wireless link, Need Opinions on My Setup

    Also to add to this once I know that the equipment I picked for the price should be a good choice (input on that), and get a bit more feedback, I will just have to buy it and see... =P
  4. I

    900 MHz Wireless link, Need Opinions on My Setup

    I am sorry I have been away this long without checking!!.. I posted this somewhere else, and was getting a decent amount of responses so I lost a bit of focus on this. I do think the $1500 quote is a bit on the high side, but I could see the little things adding up quickly (it always does!)...
  5. I

    900 MHz Wireless link, Need Opinions on My Setup

    I am in the process of possibly setting up a wireless link between my friends house and mine for the reason of a broadband connection that I can't get at my location. Anyhow the range is roughly 1.6 Miles and I am able to mount my antenna about 50' up on an extended pole and he will be...
  6. I

    Does the Ultra xfinity 600w psu work with Antec p180 or Nine hundred?

    Alright this is the best pic I have right now.. P180 I circled where my 8-pin is on the board, I just have it running through the back section. If anything is needed I have a camera in front of me and have to take the thing apart tomorrow to lap anyhow... So let me know if the pic doesn't...
  7. I

    Does the Ultra xfinity 600w psu work with Antec p180 or Nine hundred?

    Your fine! I have a P180- case with the FAR X-finity installed now on a P35-DSQ Cable length was adequate as I used the 8 pin connector for the extra 12V+ connection, which I believe is also the 4pin but not seperated (I could be WAY off on that though!) Anyhow I was able to even mount it...
  8. I

    If and when to lap a CPU.

    I am deciding to lap or not, and if not I think I am running out of things to do (well buy a new C2D, or HSF) or run a hot stock speed chip. Now I am @ 333X9 (E 4300) I am seeing about 54C at idle and upwards 80C+ at load. Voltage gain is up 2 points which is around 1.34V I didn't really...
  9. I

    High temps 4300C2d and P35-DQ6, seem off!

    I probably should have put this in the Cooling forum, so sorry for that! Alright I did some reading and found this "Both temps are correct, sort of. TAT and CoreTemp give you internal core temps which are much higher than the normal CPU temp readings that we're all used to seeing and...
  10. I

    High temps 4300C2d and P35-DQ6, seem off!

    Alright I just setup a P35-DQ6 with a 4300C2D with a Scythe Ninja, Arctic Silver 5 in a P180 case.. Results are at stock speeds, all smart fan and options alike turned off. At idle in TAT and Core Temp .95 I see about 50C... With Easy Tune 5 and Speedfan 4.32 I see about 36C AS SOON as I...
  11. I

    Software to check hard drive's s/n

    Try SIW http://www.gtopala.com/siw-download.html I haven't used it in a while, but when I did it listed a LOT of information.. I don't know what is different between the free and paid version but the free had plenty of information.
  12. I

    Optical SATA on ICH9R or JMicron? (P35-DSQ)

    So overall, and mainly to sum this up using either the ICH9 (built in ports) as compared to the JMicron really makes no difference other than install issues? The reason I am asking this is because I remember a motherboard I had with an add on raid channel (IDE) and it didn't work well at all...
  13. I

    Optical SATA on ICH9R or JMicron? (P35-DSQ)

    That makes sense, I don't even know if XP will recognize the SATA ports on the ICH9R without a disc either.. I wouldn't think so anyway, time to slipstream some in I guess!
  14. I

    Help on buying a DVD burner

    I would say either Samsung, Lite-on, Pioneer, Ben-Q (if you can find them), or LG I have heard the recent NEC's frequently have issues, or just aren't as good as they used to be for now. The differences seem to be that one may be better at one thing, than the other. I believe that the...
  15. I

    Optical SATA on ICH9R or JMicron? (P35-DSQ)

    Alright so I am putting my new rig together tomorrow morning. I am just wondering by preference if it is better to use the JMicron SATA ports or the ICH9R ports for the optical drives. Mainly worried about compatibility or silly issues if using one or the other. Board is a P35-DSQ and...
  16. I

    Gigabyte P35 Motherboard Thread

    Alright here's the link... Some German words don't seem to translate all too well.. If you speak German, well then I will send the original link.. I tried with babelfish also and got the same results http://google.com/translate?u=http%3A%2...t%3D821&langpair=de%7Cen&hl=en&ie=UTF8 Overall...
  17. I

    Gigabyte P35 Motherboard Thread

    I have the link at home that refers to a german site with the break down of it listed... I will see if I can find it later on this evening.. I ended up ordering the DQ6 because I couldn't find the DS4 ANYWHERE! It wasn't too bad $260 shipped, which I wouldn't think is more than $20 or 30...
  18. I

    Gigabyte P35 Motherboard Thread

    The R stands for Raid function in the chipset.. So all I see different from briefly looking at it is the DS3R has the ICH9R and the DS3 has the ICH9 southbridge.
  19. I

    Gigabyte P35 Motherboard Thread

    It does in fact fit, as that is the cooler I am going to purchase hopefully with the DS4 and has been tested and fits (barely). "There was literally 3-4 millmeters of clearance for the Scythe to install" (http://www.xtremesystems.org/forums/showpost.php?p=2186265&postcount=54)
  20. I

    Gigabyte P35 Motherboard Thread

    Alright well ClubIT prices haven't changed any as of yet (not that I expected them to, but I had called) It seems that you can pretty much find all of these except the DS4, which sucks cause that's the one I want!... Unless when introduced is very close to the DQ6, then I may reconsider...
  21. I

    Gigabyte P35 Motherboard Thread

    Alright I read a little more into that. "Our retail P5K-Deluxe board was purchased recently even though an embargo is supposedly in place until June 4th for distribution of P35 product" (anandtech). So maybe have to wait a bit more to see them at all the retailers, but hey it is nice you...
  22. I

    Gigabyte P35 Motherboard Thread

    I would guess the major retailers will start selling them after the supposed NDA of the 21st has come. Now I wonder if the P35C will really be worth getting for the DDR3 option. I am figuring by the time it is useful enough to have DDR3 it may be upgrade time again... Opinions? Also the fact...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |