I need to find a PS2 to USB adapter as well as an adapter that will allow me to connect 2 female serial connectors together. Any stores on the net you could point me to? Thanks
r.gibbs@insightbb.com
I am trying to install a new Harddrive in an older system (BH6 mb and PIII 1000mhz processor). The harddrive is a Maxtor 80gb (the one from OD) and is a 7200 rpm drive. When I boot from a Windows 98 floppy startup disk and then run fdisk it only sees 12gb of the harddrive. I created a Maxblast...
Got the 9600Pro at BB and downloaded the file at steam (700+ mb). However, when I go to start a game it asks for the CD key which I assume is the key that was on the back of the Half life2 coupon. Tried this and no good (doesn't accept this key number). So how do you access the games through...
Snagged one of the 180339 S/N at the Best Buy in Greenwood Indiana. Was indeed a 9600Pro. Several more left on the shelf Wed afternoon (they also were mixed in with the 180034 S/N SE's).
I am considering upgrading my TI4200 to a Radeon 9600Pro and what to know what improvement I can expect. I have a Dell 400sc system (with the 3.2HT) and am currently running an ATI GF4 TI4200 128mb (only 4X capable but motherboard supports 8X). I mainly play flight sim games e.g. FS2004 and the...
I have Directv but go through Pegasus and I just called about the $1 upgrade. No deal but it is available for an extra $12/mon. Said I don't think so. So much for Pegasus.
r.gibbs@insightbb.com
Need to upgrade my old Diamond MX300 sound card with one that is XP compatible. I just need a rather basic card that has a game port. Any suggestions? Thanks
r.gibbs@insightbb.com
Just got my new Dell 400SC and need to know how to set the AGP slot to run at 8X. It is currently at 4X and I have a video card (ASUS TI4200) capable of running at 8X. Anybody know?
r.gibbs@insightbb.com
Just got my Dell 400SC and want to set up the AGP port to 8x. It is now 4x but my video card (an Asus TI4200 does support 8x). The card works fine but need to go to 8x on the AGP. Thanks
r.gibbs@insightbb.com
I just bought a dell 400sc server and have bought 2 256 sticks of Crucial PC3200 ecc memory for dual mode operation. The system came with 1 128mb ddr400 memory. If I add another 128 stick of this dell memory (from the FS/FT section here) can I still run in dual mode if I use all 4 sticks? Thanks...
I have a new Dell 400SC on the way and would like to know if I can just move my hard drives (3) to the new system without any problems. Drive C has the OS (Windows XP) and I will be removing the drive (40GB) that came with the system and will put in into another machine? If they may be problems...
I just ordered 2 PC3200 256mb sticks of crucial memory from newegg. I got the non-ECC memory (I will be selling the 128mb ECC memory that came with the 400sc system). Does this system require ECC memory to work properly? Thanks
r.gibbs@insightbb.com
What kind of ram (2 - 256mb sticks of PC3200) would be the best value for this system (no intention of overclocking a dell)? Thanks
r.gibbs@insightbb.com
I got in on the Dell 400SC deal and need info on ram for this system. I will be replacing the 128MB DDR400 ram with 2 256mb sticks of PC3200. What is a good value brand on this ram since I will NOT be overclocking the 3.2ghz system? Thanks
r.gibbs@insightbb.com
Does it matter whether or not...
If someone has a SB system 10% off coupon I would like to order this 400sc with the P4 3.2. I have gotten the coupons before in my email but not this time. I have given coupon codes away in the past and need one now, but If someone has one and wants to sell it for a few bucks I would be...
Will be upgrading my P3 system and saw this Dell 400SC. I am a bit concerned about the 250W power supply since will be adding a cd writer and several more hard drives. Which is the better way to go 1. upgrading my current system with a new IS7-E MB, a P4 2.4 and some PC3200 ram or 2. go with...
I have replaced the power supply on my old P3 system with an Enermax EG365P-VE in the past year but will be upgrading to a P4 system with Abit IS7-E MB. I noticed on the motherboard that there are 2 power connectors, One looks like the standard connector used on the P3 board (located near the FD...
I have finally ordered my IS7-E and P4 2.4C processor and need a recommendation as to what ram to get. I will be overclocking this new setup but don't have very deep pockets (I will get 512mb). I haven't bought any ram for a long time so really don't know what brands are good values and are of...
I am putting together a system for an old friend out of old parts that I have. One of the items is an old Abit BH6 motherboard that uses the Round flat battery to power the CMOS. The battery is missing and nowhere in the users amnual does it specify what Battery it uses. Anybody know what...
I currently have an Enermax EG365P-VE in my P3 system. Is this power supply compatible with upgrading to a P4 system, Specifically with an Abit IS7-E motherboard. Thanks
r.gibbs@insightbb.com
Thanks so much for your indepth answers. I will get going on this upgrade shortly. Do you have any idea what my current BH6 (ver 1.2) with the P3 1ghz (100mhz fsb) processor might be worth on the for sale/trade forum? Thanks again
r.gibbs@insightbb.com
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.