jailbreak let you run stuff apple doesn't like.
unlock let you actually make phone call without being on at&t network.
you can downgrade to jailbreak assuming you have already saved shsh either with cydia or tinyumbrella.
unlock depends on baseband, which can not be downgraded by...
assuming it is at&t version, insert an at&t sim card and connect to itunes on your pc, the phone will be activiated shortly. you will then be able pass through that emergency call screen.
have one and it works fine. I have a 2600k at 4.5 on this board. the only bad thing is that you can't enter exact voltage number, just a +/- from default.
have an old ultra-120 extreme as the cooler. just note that you can only mount the ultra-120 vertically. otherwise, the heatpipe will hit...
if you mean GA easy tune 6, then the answer is still no. It doesn't give you access to cpu multiplier either. the only way to manually overclock is raise that BCLK, which won't get you very far~~.
I think this is about it. I am just going to move this setup to the living room and wait for my...
nope, grayed out, can't be changed.
cpu multiplier can be changed (max is 38 on 2600k, which is the max turbo multiplier for one core). however, it doesn't really have any effect. when you select 38 and reboot, nothing happens.
doesn't matter. tried with IGP and without IGP.
either H67 doesn't support overclock at all or GA chooses not to enable it.
well, GA may just screwed up something as the DOS bios update doesn't even work (can only update bios in windows)
tested retail 2600k on giga h67ma-ud2h bios F6. you can not overclock at all.
no idea why GA even bother to put all those voltage controls there, since you can't overclock the cpu~~
you don't really need third party software at all.
just cmd and use diskpart to remove what's already out there and create new & active as fat 32
extract iso to the usb and done.
Do you actually use a nv card at all?
reference bfg gtx 280, reference evga gtx 285, reference asus gtx 285 all can pass audio through dvi with dvi-hdmi adapters + connect to motherboard S/PDIF OUT 2 pins.
all tested on asus p6t x58 win 7 rtm 64bit / gaga x48-dq6 vista 64bit.
there are...
for NV, you should be able to pass audio through video card by using hdmi cable with dvi-hdmi adopter provided with your video card.
there is a S/PDIF port on your video card?
depend on your vendor, you may get a S/PDIF wire with your video card.
one end of that S/PDIF wire connect to...
tried, no change.
I guess i will load a new windows on a ssd and uplug everything other than video cards.
loaded up 7 rtm and only video card driver.
yeah...works, generally got the same score as yours.
something must messed up the system.
strange, can't duplicate your result with close to the same hardwares.
wonder if anyone else has similar setup...
w3520@4ghz
Asus P6T Deluxe @ 20 x 200MHz
12gb ddr1603
X-Fi Forte
velociraptor
vista ultimate 64bit
gtx285 sli match your clock
same game setting
all i got
210.2 ...
those G80 can't do bit-stream. you should still be able to get parital dxva if you load powerdvd 7/8 decoder.
for the coreavc, if you are using the most recent one, you should still be able to use cuda. if it doesn't work, it probably is not well supported yet by coreavc.
as far as i remember, kmp itself does not decode in dxva. it just uses powerdvd h264 decoder... any 3rd party player that has the ability to load external filter can do it. such as mpc-hc.
Potplayer by KMP's original author does seem have its own dxva decoder.
mpc-hc has its own internal...
either the benchmark has some problem with ati or ati's driver doesn't work well this time.
win7 rc 64bit, cat 9.6 w3520 @4.0Ghz
1080P Max setting, no v-sync
stock 4870x2, dx9 : 126.9 , 120.9, 8.8, 9.0 avg 60.9
dx10: 118.6, 42.2, 14.3, 40.6 avg 48.1...
Mad Catz fightpad 360 version doesn't need to be configured though sf4 launcher .
if you need to change setting, you need to change it in game.
the PS3 version, you do need to map it through sf4 launcher.
if your fightpad doesn't work, either it is broken or incompatible with the...
if you go with DXVA through video card, it is better to get Nvidia video card that has VP2/VP3 ( most 8xxx series except the first ultra/gts, all 9 series & 200 series).
Nvidia card is capable of H264 1080p L5.1 and up to ref 16 in DXVA bitstream mode with MPC-HC internal decoder.(Note, there...
i7 prices were up at newegg & zipzoomfly for a short period of time.
newegg:
free shipping
920 $319.99
940 $599.99
965 $1069.99
screenshot:
http://img266.imageshack.us/img266/2222/920pricevb3.jpg
http://img260.imageshack.us/img260/6361/920uh5.jpg...
wd640 is faster than hd501lj, but also much hotter.
right next to each other in p180b v2
hd501lj 30C
hd103uj 36c
wd6400aaks 42c
remove wd640, hd103uj will around 30C, same as hd501lj...
hd103uj is kind of picky about sata port, same issue with 3 intel boards.
that's much lower than my undervolted qx9650 @3ghz (idle voltage 1.072 in cpuz)
with a torrent download in the background, the idel temp is around 36-38c in coretemp 0.99 (room temp is 22c), prime95 or occt @50-51c.
lapped qx9650@3.0 undervolted
lapped ultra-120 extreme+ Noctua P12 1300rpm...
For 8GB -GSKILL F2-6400CL5D-4GBPQ, GA P35C-DSR can take it without a voltage increase anywhere.
ASUS P5EW PRO also can take it without voltage increase.
GA X48-DQ6 need 0.35 increase on MCH to be stable with the same 8GB ram....
switch to 8GB Mushkin, GA X48-DQ6 need 0 increase on...
this is the only paste i tried so far that will stain my cpu and/or heatsink.
when you got a ulgy mark on your 1000+ usd cpu and shinning lapped heatsink, it is NOT a good feeling at all. it all happend within only few hours priming test.
I have tried tuniq tx-2, noctua nt-h1, as5, mx-1...
bought 3 tubes from frozencpu about 2 months ago.
tried once on my qx9650, all it did was stained my cpu and lapped ultra-120 exteme, which forced me to lap both.
used Arctic Silver cleaner 10+ times, can't get rid of the mark.
by the way, it dried up superfast. only loaded it up few...
it's g.skill ddr500 (1GB*4)
I no longer use that pc. it's now for my parent, so it's in a low power mode
cpu undervolt @stock
memory at 400mhz @3 3 7 7 2T
it has been this way for a year now..
vista 32bit can use 3326mb
i have 4 stick 1GB on my dfi nf4 ultra-d. it works fine. only installed vista 32bit. can use up to around 3.25GB. i believe you should be able use all 4GB with 64bit os...
back to early dec'07, my friend told me that some chinese people cracked the clvc1dec.ax file when i bought him a 2600xt. just like the h264 decoder, we loaded it up through kmp. it works fine.
he showed me the info from a hardspell.com website page. it was chinese. don't ask me. i don't...
powerdvd's vc-1 decoder has been cracked since last year. you can already use it outside powerdvd... don't ask me where to find it.
vc-1 full acceleration only works on ati hd2400,2600 &hd3xxx series & those new nv 8400gs
I doubt it. I know some early batch of QX have problem with temp reading on cores....
My QX9650 @3.84G @1.280V prime underload reached 65C easily.
Lapped QX9650, Lapped Ultra120 ex, 1 Noctua P12 @1100, 1 Noctua S12 @1100.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.