Search results

K
4GHz and beyond?

1: Yes the P35 will let you hit 450mhz ez, I have an Abit IP35 and it has no issues at all, there are reports of this board hitting 490+ fsb. 2: Chances are you won't pull it off with air cooling but in order to give you the best chance here are a few thoughts: a: Go with a Core 2 Duo...
- kingfetty
- Post #4
- Aug 2, 2007
- Forum: CPUs and Overclocking
K
Intel ICH9R Raid Question

Ok, I have the IP 35 Pro now and am glad to say that you can run AHCI and RAID at the same time. By setting the controller mode to RAID it runs both. Also you can have a RAID and non-RAID drives on the same controller and boot from the non-RAID. The trick in Vista was to set the...
- kingfetty
- Post #7
- Jul 31, 2007
- Forum: Computer Building
K
Could i get some guidance on a new motherboard?

I'll second that IP35 Pro suggestion.
- kingfetty
- Post #4
- Jul 30, 2007
- Forum: Motherboards
K
Choice between Abit IP35 or Asus P5W DH Deluxe[POLL]

My IP35 Pro has surprised me at every turn, Could even run Q6600 @ 3ghz with all the lowest voltages. I definatley recommend it.
- kingfetty
- Post #13
- Jul 30, 2007
- Forum: Motherboards
K
Q6600 B3 @ 3 GHz

Try a 7x and pump up the FSB see what you get, mine actually ran cooler that way and let me get another 200mhz out of it.
- kingfetty
- Post #5
- Jul 30, 2007
- Forum: CPUs and Overclocking
K
---------- Quad Overclock Thread! ----------

Well I took another crack at it, lowered my multiplier and cranked the FSB up, it actually ran cooler. Made it to 3.2 stable now for 6 hours primed.
- kingfetty
- Post #80
- Jul 30, 2007
- Forum: CPUs and Overclocking
K
Squeeze Another 6c with a simple mod P180/182/190 case

Two screws outside the case toward the rear, remove them, then slide the fan backward slightly and it will drop free.
- kingfetty
- Post #6
- Jul 30, 2007
- Forum: CPUs and Overclocking
K
Squeeze Another 6c with a simple mod P180/182/190 case

here's my factors to consider :) MB: Abit IP35 Pro Cooler: Ninja I run both the top and rear fan at high. Top fan outward: Avg Idle Temp: 31C Avg Load Temp: 50C Top fan inward: Avg Idle Temp: 29C Avg Load Temp: 44C Another thing is PWM Outward Load Temp: 72C Inward...
- kingfetty
- Post #5
- Jul 30, 2007
- Forum: CPUs and Overclocking
K
Squeeze Another 6c with a simple mod P180/182/190 case

This is so simple but works: If you have a Antec P180/182/190 case series you get lower another 6-7C on the temp by changing the direction of the top case fan to blow inward. This case fan sits very low toward the motherboard and causes an airflow that is hard to achieve any other way. This...
- kingfetty
- Thread
- Jul 30, 2007
- Replies: 5
- Forum: CPUs and Overclocking
K
---------- Quad Overclock Thread! ----------

Kingfetty q6600, 3ghz @ 334, 1.3125V, Scythe Ninja, B3 Abit IP35 Pro Also runs @ 49c under full load.
- kingfetty
- Post #64
- Jul 30, 2007
- Forum: CPUs and Overclocking
K
Best motherboard for overclocking Q6600?

All the reviews I've read indicate that the Nvidia chipsets don't deal well with the quad cores. While the p35's tend to be able to really push the quad cores. That being said, if you plan going SLI in the future or need more PCI-X bandwidth go for the nvidia or wait for the x38 chipset to...
- kingfetty
- Post #3
- Jul 26, 2007
- Forum: Motherboards
K
What does it mean (memory ratio)

So the second number is the RAM speed and the first is the CPU FSB? So... 266 FSB @ 1:1 = 266 RAM (ddr2 533)? 266 FSB @ 1:2 = 522 RAM (ddr2 1066)?
- kingfetty
- Post #3
- Jul 26, 2007
- Forum: Memory and Storage
K
Build Critique - Never Built A Computer Before

The 8800 GTS 320mb overclocked vs the 640mb not overclocked, save some dough and only about 3fps difference.
- kingfetty
- Post #14
- Jul 26, 2007
- Forum: Computer Building
K
Build Critique - Never Built A Computer Before

Reviews on the Abit IP35 Pro have been great, here's a pretty good read: http://www.xbitlabs.com/articl...lay/abit-ip35-pro.html
- kingfetty
- Post #13
- Jul 26, 2007
- Forum: Computer Building
K
What does it mean (memory ratio)

Should be simple enough to answer. What does the memory ration mean? 1:1, 1:2, etc.?
- kingfetty
- Thread
- Jul 26, 2007
- Replies: 4
- Forum: Memory and Storage
K
Intel ICH9R Raid Question

Yeah, I figured, it wouldn't be a problem excluding a drive or 2, but I was wondering the os (vista) would have a problem with non-raid and raid drives on the same controller. I read in a forum somewhere (not sure where) that someone was having problems in a similar setup, just seeing if...
- kingfetty
- Post #3
- Jul 26, 2007
- Forum: Computer Building
K
Build Critique - Never Built A Computer Before

I may suggest going with an overclocked GTS 320mb over the 640mb gts it would save some cash and benchmarks are darn close.
- kingfetty
- Post #10
- Jul 26, 2007
- Forum: Computer Building
K
Build Critique - Never Built A Computer Before

Planning on overclocking any? Looks like fantastic build so far. If overclocking, I may suggest going with the Abit IP35 instead, it's had excellent luck in the OC department.
- kingfetty
- Post #9
- Jul 26, 2007
- Forum: Computer Building
K
Vista Home Premium only detecting 465GB out of 500GB?

Also depends on the cluster size, larger cluster size, more "wasted space" http://www.pcguide.com/ref/hdd/file/partCluster-c.html
- kingfetty
- Post #14
- Jul 26, 2007
- Forum: Computer Building
K
Intel ICH9R Raid Question

Is it possible with a ICH9R based raid to have (5) drives in a raid 5 and 1 drive outside of the raid on the same controller and boot/install the os on the 1 drive not in the raid? Or do I need to buy another SATA controller and install it for the OS drive? Abit IP35 pro (5) 7200.10 500gb...
- kingfetty
- Thread
- Jul 26, 2007
- Replies: 20
- Forum: Computer Building

RESOURCES

Top Bottom