Search results

  1. C

    Upgrading to Intel, need suggestions for good overclocking build.

    Listen to Mark - he's on it. And particularly regarding Ram. You do not have to overspend on Ram to achieve moderately high overclocks at 1:1 ratios. It seems to me that folks get themselves into trouble during the overclock phase when they attempt to run DDR2-1066 or higher using async...
  2. C

    HWMonitor - TEMPIN2 Temp concern/issue:

    On my rig, I don't even register a temp2. Temp0 is motherboard. Temp1 is CPU. Northbridge maybe?
  3. C

    Gigabyte P35 DS3R won't allow me to update BIOS

    I think on some versions of bios, you'll find an option within bios that protects the bios from flashing. If that's the case, disable this.
  4. C

    Best minimalist case?

    This thread just started, and points to what looks like a great case based on the desires of the OP here. http://forums.anandtech.com/me...=2138967&enterthread=y I like it.
  5. C

    E6750 & Gigabyte P35C-DS3R Overclocking Thread

    re: Refresh to ACT delay I did some googling and experimenting on this issue a while back. I came to the conclusion that the default is not zero - instead, when you move into manual settings the bios zeros it out and waits for a value. I seem to recall that stability was an issue at values...
  6. C

    NEW CORETEMP 0.96

    Same here. Not always. And it's not immediate. Both the beta, and the new version. I still use it now and again to double check other temps readings in other programs I run. Let me suggest HWMonitor instead. Virtually no overhead, very stable, and it monitors CPU temp, motherboard temp...
  7. C

    E6750 & Gigabyte P35C-DS3R Overclocking Thread

    @sideshow - First, Welcome to the Anandtech Forums! Looks perfect. It IS easy if you do a little reading beforehand, which you did. Regards,
  8. C

    Memory recommendations for PK5-E and E6750?

    Decent DDR-800 ram can be expected to O/C at least 10%. DDR2-800, running at 440 will give you a more than moderate system O/C of 3.5GHz (see sig.) Point being, you don't need anything more than DDR2-800 with the E6750.
  9. C

    E6750 & Gigabyte P35C-DS3R Overclocking Thread

    I have no idea.
  10. C

    My overclocking guide

    If it's information on overclocking the GA-P35C-DS3R, we have two pretty strong and active threads here at Anandtech. First, a thread on the board itself: http://forums.anandtech.com/me...AR_FORUMVIEWTMP=Linear And then a thread on overclocking the board...
  11. C

    Is 3.0Ghz in one C2D the same as 3.0Ghz in another?

    @pancake - of course, you're right - a mistake. Posting under the influence. the E6750 is an 8 multiplier chip - 400 x 8 = 3.200GHz
  12. C

    CPU fan intermittenly stops

    Why? I'm betting he's running stock - no O/C whatsoever. PWM is doing it's job. Fan spins when the CPU needs some cooling. Doesn't when it doesn't. If temps aren't running wild, don't sweat it. Instead, turn off the CPU fan alarm. Uncomfortable with that? Try switching fan control to...
  13. C

    Is 3.0Ghz in one C2D the same as 3.0Ghz in another?

    The e6750 is a heck of a chip. O/C to 3.2GHz is a dead cinch at stock volts and stock cooling - and cool and quiet at 3.2GHz. Allows a person to run 1:1 ratios (synchronous) on cheap PC-6400 ram. Set ram to 400 (stock), CPU multiplier to X8 (stock) and 400 x 8 = 3.200GHZ. By the time you...
  14. C

    My overclocking guide

    Have you looked at graysky's O/C guide and thread here at Anandtech? If this "exercise" is for your personal use, why not just go there, educate yourself, and come back with any questions. You haven't even decided on a motherboard yet? Here's another article on overclocking, and is one of the...
  15. C

    Strange Temp readings

    No ideas. Room temps were consistent? That's all that comes to mind re: the temp changes.
  16. C

    Some simple OC questions.. Please help.

    Cure time is dependent on your particular flavor of thermal compound. Cure time will not prevent you from beginning your O/C. Once "cured", CPU core temps will be a couple of degrees C lower than when you installed. Temps should be better than your old build almost immediately. You...
  17. C

    Poor temps? What do you guys think?

    Your CPU temp is colder than your ambient room temp? How does one do that with two low rpm fans and an air-cooled heatsink?
  18. C

    Very nasty new threat.

    You've seen this? It wasn't helpful to you? http://forums.techguy.org/malw...le-exe-popping-up.html Regards,
  19. C

    Poor temps? What do you guys think?

    That's what I'm saying, yes.
  20. C

    Poor temps? What do you guys think?

    @andy - as i said, I'm definitely NOT the go-to guy regarding temp sensing. Meaning, i have no idea where the thermal sensor is that monitors the CPU value. All I can tell you is that when I changed up the airflow within my case, the CPU value dropped in a big way. I think that happened for...
  21. C

    Poor temps? What do you guys think?

    @andy - my comments aren't going to directly apply to your situation because, well, configurations are different and all. But I struggled a little with temps too, and it was maddening for a while. I find that the whole business of cooling stuff is pretty arcane. Maybe you can find something...
  22. C

    DELETE

    @Sparky - sure Sparky. Our moderator, Schadenfroh, who does just a kick-ass job for all of us here at Anandtech, has this thread running: http://forums.anandtech.com/me...id=40&threadid=2091004 You'll see the link to the Amazon special under the Kaspersky section. Your Fry's rebate is...
  23. C

    DELETE

    I juat took advantage of this offer today - the 65 buck rebate, I mean. I'm still wondering what the catch is - 3 protected machines, one year, with their most complete package, free? The only specific stipulation was that it had to be bought from Amazon itself, as opposed to a retail...
  24. C

    I need someone to confirm my theoretical findings

    Nice links. Well thought out and well done. Since I carry a sig around, you'll note the 4-4-4-12 timings @ 1:1 ratios. Why? Because I can and still maintain a moderate O/C at stock voltages (1.3500 vcore). I completely agree with the links you've shared and others like it; I'm just not...
  25. C

    Replacing stock heatsink with zalman 9700

    Huh? Gin? Vodka? Or arctic cleaner? Those are his choices? Too many impurities in the booze. Just about any drugstore/grocery store will have 91% isopropyl alcohol. Use that any a cheap coffee filter (lint-free) and you're good.
  26. C

    Thermal Grease

    I like your thinking - no stone unturned. I think the stock cooler would show more variance.
  27. C

    E6750 & Gigabyte P35C-DS3R Overclocking Thread

    I took that picture to mean...following his changes, bios resets to that picture, meaning some value is causing a problem. Or not. bmf79?
  28. C

    Finally made the move to Intel

    @jojo81 - I think you'll be very pleased with that new processor and board - it's the "snappiest..." ADATA is on your board's supported memory list - not certain about your specific modules.
  29. C

    Overclocking Problem

    Abit IP35? Serpentroyal will be around shortly, I trust, and he'll get you squared away. Patience. Regards,
  30. C

    E6750 & Gigabyte P35C-DS3R Overclocking Thread

    @bmf - that's a very nice overclock on the E6750, especially at 1.3500v on the vcore. Important for you to know that CPU's and ram modules all have variances and that as you begin to reach the outer limits of a particular overclock, cutting and pasting someone else's bios values is going to...
  31. C

    is my E6600 idling at a good temperature?

    @tc91 - same basic result - 11,682. Ram timings maybe. Nvidia driver maybe. Frankly, our setups are more dissimilar than similar.
  32. C

    is my E6600 idling at a good temperature?

    @tc91 - does 3DMark default to 1280x1024? Then that's what it's running at. Once inside the free version, I don't see any way to change settings.
  33. C

    is my E6600 idling at a good temperature?

    Kind of what I thought - I thought 11,700 ecent, but it isn't world beater stuff. Myo - you think the Quad plays a part here, though? Does 3DMark use the Quad? Also, in messing with the program, it's the core clock that really makes a difference.
  34. C

    is my E6600 idling at a good temperature?

    I run 3D Mark'06. My shader is set to 1458, core is 621, mem is 972, effective 1944. I set the card to performance in Nvidia control panel, and that's it. I'm not sure if 3DMark adjusts the resolution of the card, but I leave that at my desktop/gaming standard, 1024x768, 100 refresh. Don't...
  35. C

    My First C2D Overclock

    Terrific results, I think, and those temps at load are very good as well.
  36. C

    is my E6600 idling at a good temperature?

    By way of reference and not exactly germane to the OP's E6600... Temps at idle - minimum 30 minutes after boot - sig for rig: CPU - 30C Motherboard - 35C Primary Drive - 34C GPU Diode - 57C Core 1 - 37C Core 2 - 37C Programs for monitoring C2D temps that apply proper Tjunction...
  37. C

    Nice heatsink to fit an MSI K9N Neo V3

    I have a couple of Slipstreams - the 800rpm and 1200 rpm models. I can tell you, the 800 is "silent" in my book. The 1200 is not silent, but I wouldn't say it's loud, and it does not have any annoying extraneous sounds like whining, clicking, etc. The 1600rpm, I've read, will by plenty...
  38. C

    is my E6600 idling at a good temperature?

    1-3C over a normal ambient temp? You sure about that? This is in a closed case? What specific program are you using to monitor those temps?
  39. C

    E6750 & Gigabyte P35C-DS3R Overclocking Thread

    @MadMvD - I sure wish I could get the same results with ram voltage that you're getting with F9. It's not happening for me. If I apply +0.3, my results are 0.206, which doesn't appear to be enough to get me stable at 4-4-4-12 @ 400FSB. If I then apply +0.4, I never get to windows. I can't...
  40. C

    E6750 & Gigabyte P35C-DS3R Overclocking Thread

    @MadMvD - thank you for your reply on the bios. I'll try F9 again - perhaps I'm going to have to go thru the motions of shorting out CMOS and removing the battery for it to hold, etc. Back to Refresh to ACT - again, you're right with what you've said there. 0 (zero) isn't auto. It's just...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |